Badger Ordnance
Badger Ordnance Condition One 34mm Scope Mount – 20MOA – 1.54″
In stock
$308.82This variant of C1 Modular Mount is 1.54” which is the common height of in-line Night Vision Devices and commonly used in precision applications. For shooters who prefer a lower and more optimum cheek-weld while still maintaining direct pass-through of Night Vision Devices. Made from 7075-T6 aluminum Type III Hard Coat Anodized Black. Weight 5.0 oz.
The mount cants from the forwardmost cross-bolt to the rear of the front ring.
- Cant: 20 MOA/5.8 MRAD
- Height: 1.54″ (Tall Height)
- Diameter: 34mm
- Weight: 5.0 oz.
- Material: Made from 7075-T6 aluminum
- Finish: Type III Hard Coat Anodized
Badger Ordnance Condition One Modular Safety Kit
In stock
$81.45Go Condition 1 with Badger Ordnance’s modular safety. The C1 semi-auto safety gives you options for a single-sided or ambidextrous control, left or right hand, 60° or 90° throw. The levers and cap have a bright red enamel indicator for easy visual verification. The kit includes a long strong side lever, short weak side lever, and weak side condition indicator cap for single-sided use as well as roll pins and a safety detent hardened to 60Rc.
- Material: 4140 Steel Case Hardened
- Finish: Manganese Phosphate
- Made for AR-15/AR-10 Pattern Rifles
Badger Ordnance Condition One Coaxial Laser Integration Fixture (CLIF)
In stock
$120.58 – $132.87The Badger Ordnance CLIF is designed to integrate the next generation of weapons-mounted Laser Range Finders to the Badger C1 series of Unimounts via the C1 ARC. The C1 CLIF is designed to be attached/detached without the removal of the C1 Ring cap to maintain zero of the primary optic. The C1 CLIF comes in two variants Short (9 Slot) or Long (12 Slot).
- Material: 7075 T6 Aluminum
- Finish: Type III Hardcoat Anodized
- Length: 9 Slot: 3.945”, 12 Slot: 4.92”
- Height from Optic Center: 9 Slot: 2.04”, 12 Slot: 2.29″
- Weight: 9 Slot: 1.8oz, 12 Slot: 2.3oz
Badger Ordnance Condition Aimpoint Micro RDM Mount – 1.70″ Height
In stock
$107.64 – $117.75The Condition One RDM is the next generation of red dot mounts. Lightweight and minimal while still maintaining the ruggedness Badger Ordnance is known for. Allows the use of any C1 J-arm socket accessory.
Made for optics with the Aimpoint Micro mounting footprint such as the Aimpoint T1/T2.
Specs:
- Height Over Bore: 2.92″ (AR-15)
- Height: 1.7″ (Lower 1/3rd)
- Material: 6061-T6 Aluminum.
- Finish: Type III Hardcoat Anodized.
- Weight: 2.1
- Steel Hardware
- Made in the USA.
Badger Ordnance Condition One Accessory Ring Cap
In stock
$103.92 – $109.21The Badger Ordnance ARC is a modular replacement ring cap for any Condition One Modular Mount. The C1 ARC allows the accessories to be connected or disconnected without removal of the ARC itself thus maintaining zero of your primary optic.
- Material: 7075 T6 Aluminum
- Finish: Type III Hardcoat Anodized
- Weight: 1.8 ounces
- For Condition One Scope Mounts (excluding Max)
- Made in the USA.
Badger Ordnance Condition One Max Accessory Ring Cap
In stock
$108.06The Badger Ordnance ARC Max is a modular replacement ring cap for any Condition One Max Modular Mount. The C1 ARC Max allows the accessories to be connected or disconnected without removal of the ARC itself thus maintaining zero of your primary optic.
- Material: 7075 T6 Aluminum
- Finish: Type III Hardcoat Anodized
- Weight: 1.8 ounces
- For Condition One Max Scope Mounts ONLY
- Made in the USA.
Badger Ordnance Condition One Max 35mm Scope Mount – 20 MOA – 1.54″
In stock
$347.51The C1 Max is the latest addition to Badger Ordnance’s Condition One Modular Mount lineup. The C1 Max was designed ground up with the precision rifle shooter in mind and has no forward cantilever for those who find cantilevered designs difficult to achieve eye relief with some optic and short action rail combos.
The mount is cants from the forwardmost cross-bolt to the rear of the front ring.
- Cant: 20 MOA/5.8 MRAD
- Height: 1.54″ (Tall Height)
- Diameter: 35mm
- Weight: 8.7 oz.
- Material: Made from 7075-T6 aluminum
- Finish: Type III Hard Coat Anodized
Badger Ordnance Condition One Max 34mm Scope Mount – 20 MOA – 1.54″
In stock
$347.51The C1 Max is the latest addition to Badger Ordnance’s Condition One Modular Mount lineup. The C1 Max was designed ground up with the precision rifle shooter in mind and has no forward cantilever for those who find cantilevered designs difficult to achieve eye relief with some optic and short action rail combos.
The mount cants from the forwardmost cross-bolt to the rear of the front ring.
- Cant: 20 MOA/5.8 MRAD
- Height: 1.54″ (Tall Height)
- Diameter: 34mm
- Weight: 8.6 oz.
- Material: Made from 7075-T6 aluminum
- Finish: Type III Hard Coat Anodized
Badger Ordnance Condition One Max 35mm Scope Mount – 1.54″
In stock
$347.51The C1 Max is the latest addition to Badger Ordnance’s Condition One Modular Mount lineup. The C1 Max was designed ground up with the precision rifle shooter in mind and has no forward cantilever for those who find cantilevered designs difficult to achieve eye relief with some optic and short action rail combos.
- Height: 1.54″ (Tall Height)
- Diameter: 35mm
- Weight: 8.7 oz.
- Material: Made from 7075-T6 aluminum
- Finish: Type III Hard Coat Anodized
Badger Ordnance Condition Aimpoint Micro RDM Mount – 1.43″ Height
In stock
$106.46 – $107.05The Condition One RDM is the next generation of red dot mounts. Lightweight and minimal while still maintaining the ruggedness Badger Ordnance is known for. Allows the use of any C1 J-arm socket accessory.
Made for optics with the Aimpoint Micro mounting footprint such as the Aimpoint T1/T2.
Specs:
- Height Over Bore: 2.65″ (AR-15)
- Height: 1.43″ (Co-Witness)
- Material: 6061-T6 Aluminum.
- Finish: Type III Hardcoat Anodized.
- Weight: 2.1
- Steel Hardware
- Made in the USA.
Badger Ordnance Condition One 30mm Scope Mount – 1.70″
In stock
$311.56 – $312.36The Condition One Modular Mount is Badger Ordnance’s answer to a growing demand for modularity in optical platform mounting. This variant of C1 Modular Mount is 1.70” which is the common height of lower 1/3rd red dot optics.
- Height: 1.70” (Common Height).
- Diameter: 30 mm.
- Weight: 6.3 oz.
- Material: 7075-T6 aluminum.
- Finish: Type III Hard Coat Anodized
- Mounting Platform: M1913 Picatinny.
- Cant MOA: 0 MOA.
- Made in the USA.
