Magpul

Add to compare

Magpul MOE Grip for AR-15, M4

Out of stock

$26.85 – $28.07
Select options This product has multiple variants. The options may be chosen on the product page
-5%
Add to compare

Magpul MOE-K2 AK Grip

Out of stock

Original price was: $20.95.Current price is: $19.90.

Similar to the MOE SL, the MOE-K2 AK Grip is a drop-in upgrade for the AK platform that offers a more vertical grip angle, but in a full-size grip design.

  • Fits both milled and stamped receivers, including those with grip reinforcement plates
  • Platform: AK type rifles
  • Grip Angle: 17 degrees
  • Thickness, max: 1.17 in.
  • Weight, w/ hardware: 2.9 oz.
  • Height, max: 4.3 in.
Select options This product has multiple variants. The options may be chosen on the product page
-5%
Add to compare

Magpul ACS Carbine Stock (Mil-Spec)

Out of stock

Original price was: $94.95.Current price is: $90.20.
Select options This product has multiple variants. The options may be chosen on the product page
-5%
Add to compare

Magpul PRS GEN 3 Precision Adjustable Stock

Out of stock

Original price was: $259.95.Current price is: $246.95.
Select options This product has multiple variants. The options may be chosen on the product page
-5%
Add to compare

Magpul Suppressor Cover – 5.5″

Out of stock

Original price was: $99.95.Current price is: $94.95.

The Magpul Suppressor Cover – 5.5” is the first product of its kind able to stand up to the extreme temperatures caused by extended strings of semiautomatic and automatic fire and protect the user and equipment against burns, while also speeding up the cooling process. Constructed of a heat-resistant polymer sleeve overlaid onto a raised stainless steel heat shield that mounts directly to the suppressor body with steel clamps, the Magpul Suppressor Cover – 5.5” minimizes heat transfer to keep external cover temperatures up to 1000 degrees F cooler than the surface of the suppressor and allows cooling airflow across the can.

  • Optimized for 1.5” outer diameter round suppressors with a body length of approximately 5.5” (not including attachment hardware/interface) such as the Surefire SOCOM556-RC2.
  • Reduces thermal signature of host firearm and mitigates mirage effects in sight picture
  • Minimizes retained heat, allowing faster cooling than any other suppressor cover technology
  • High strength corrosion-resistant stainless steel heat shield
  • Two stainless steel clamps provide a strong, rigid and reliable interface capable of sustained firing sessions and rough handling
  • High temp polymer sleeve withstands brutal suppressor temperatures during extended periods of firing without deterioration
  • Made in the USA.
Select options This product has multiple variants. The options may be chosen on the product page
-5%
Add to compare

Magpul STR Carbine Stock (Mil-Spec)

Out of stock

$80.70 – $80.73

The Magpul STR (Storage/Type Restricted) Carbine Stock – Mil-Spec is a drop-in replacement buttstock for AR15/M4 carbines using Mil-Spec sized receiver extension tubes. A storage-capable version of the CTR®, the STR has improved cheek weld and two water-resistant battery tubes on a compact, reinforced polymer A-frame design.

  • Platform: AR10, AR15, M4, M16, M110, SR25
  • Compatibility: Mil-Spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, Armalite, S&W, LMT, and others
  • LOP, M4 Collapsed ~10.9 in.
  • LOP, M4 Extended ~14.2 in.
  • LOP Adjustment Range 3.3 in.
  • Length, max 7.3 in.
  • Weight 12.3 oz.
  • Weight, w/ receiver extension 16.3 oz.
  • Width, max 2.6 in.
Select options This product has multiple variants. The options may be chosen on the product page
-5%
Add to compare

Magpul UBR Gen 2 Collapsible Stock

Out of stock

Original price was: $199.95.Current price is: $190.39.
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Magpul MOE M-LOK Forend for Remington 870

Out of stock

$33.98 – $36.22
Select options This product has multiple variants. The options may be chosen on the product page
-5%
Add to compare

Magpul ASAP QD Ambidextrous Sling Attachment Point

Out of stock

Original price was: $29.95.Current price is: $28.45.

The ASAP QD (Ambidextrous Sling Attachment Point QD) allows a wide range of motion, enabling true ambidextrous weapon manipulation for both left and right-handed shooters. Replacing the standard AR15/M4 carbine stock receiver end plate, the ASAP QD provides a tactical advantage by minimizing sling snagging and facilitating easy transition to and from weapon and reaction side shoulders. The ASAP QD works with one-point type slings with push-button quick disconnect sling swivels such as the MS4 GEN 2.

  • Made from precision cast black Melonite™ finished steel and compatible with both Mil-Spec and Commercial-Spec carbine receiver extensions.
  • Made in the USA.
  • Allows a wide range of motion
  • Durable steel construction. Case hardened and finished with Melonite for extreme resistance to wear and corrosion
  • Work with Mil-Spec and Comm-spec carbine receiver extensions
  • Adjust to your needs
  • Accepts any push-button QD sling swivels as well as Magpul QDM

NOTE: The ASAP QD is NOT compatible with A1/A2 fixed stocks as well as any other similarly mounted stock such as the Magpul PRS®, UBR®, and MOE® Rifle Stocks.

View product
Add to compare

Magpul M-LOK Rail Covers – Type 2

Out of stock

$20.65 – $23.88

M-LOK Type 2 Rail Covers are low-profile, two-piece covers that install directly onto most M-LOK aluminum hand guards (non-polymer). These M-LOK covers are non-orientation specific, which allows the user to mount them in any direction desired without affecting function. Not compatible with MAGPUL MOE M-LOK, MOE SL, and SGA forends, and may not be compatible with free-float handguards that have a wider and flatter profile, as they will not seat deep enough to allow the center portion to lock-in.

  • Includes six panels, each covering one M-LOK slot.
  • Made in the USA.
  • Non-orientation specific: No up / down, left / right, front / back orientation
  • Contact surfaces made up of TSP
  • Low Profile: Covers barely protrude more than 1/8″ above the rail surface
  • Simple install and uninstall: Using a simple, pointed tool, covers can be installed or uninstalled in seconds
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Magpul M-LOK Bipod Mount

Out of stock

$23.66

The Magpul M-LOK Bipod Mount allows for the attachment of most Harris®-style stud mounted bipods to M-LOK compatible hand guards and forends. The M-LOK Bipod Mount offers a low-profile, robust, and elegant mounting solution for the most common bipods on the market. By utilizing the direct-connect properties of the M-LOK system, the bipod sits closer to the mounting surface than other adapters while providing superior support to the bipod for strength and stability. The Bipod Mount is also compatible with other accessories that attach to traditional sling studs. Machined from Mil-Spec-anodized aluminum, the M-LOK Bipod Mount also features beveled ends and corners to reduce snagging and sharp edges. All hardware necessary for attachment directly to M-LOK slots on either aluminum or polymer hand guards and forends is included.

  • Max overall length of 2.33″.
View product
Add to compare

Magpul M-LOK Paraclip Sling Mount

Out of stock

$21.15

The M-LOK Paraclip Sling Mount is a steel clip-in sling mount for M-LOK compatible systems. It is constructed of high-grade, precision cast steel and has an extremely durable Melonite finish. With a low-profile and snag-free design, it fits a wide range of clips, including the Magpul Paraclip.

  • Made in the USA.
  • Mounts to M-LOK compatible hand guards and friends
  • Accepts clip-style attachments such as our own Paraclip
  • Durable steel construction
View product
Add to compare

Magpul PMAG – 10 Round Glock 17 9mm Magazine

Out of stock

$17.90

The Magpul® PMAG 10 GL9, Glock 17 was designed for flawless reliability and durability over thousands of rounds. They provide the same quality and performance of the proven Magpul PMAG series of Glock magazines while also providing a viable product solution to those in locations and situations where a 10-round capacity restriction is required or desired. Includes a high visibility controlled-tilt follower, a stainless steel spring, an easily removable floorplate for cleaning, paint pen dot matrix for mag marking, ridged floorplate edges for better grip, and 10-round indicator windows. The magazine drops free when loaded or unloaded. All with the same boring reliability you expect from an OEM magazine.

  • The PMAG 10 GL9, Glock 17 is compatible with all full-size 9mm Glock handguns, as well as compact and sub-compact variants with some protrusion below the grip.
  • Made in the USA.
View product
Add to compare

Magpul PMAG – 10 Round Glock 19 9mm Magazine

In stock

$17.77

The Magpul PMAG 10 GL9, 9×19 – GLOCK 19 was designed for flawless reliability and durability over thousands of rounds. It provides the same quality and performance of the proven Magpul PMAG series of Glock magazines, while also providing a viable product solution to those in locations and situations where a 10-round capacity restriction is required or desired. Includes a high visibility controlled-tilt follower, a stainless steel spring, an easily removable floorplate for cleaning, paint pen dot matrix for magazine marking, ridged floorplate edges for better grip, and 10-round indicator windows. The magazine drops free when loaded or unloaded. All with the same boring reliability you expect from an OEM magazine.

  • The PMAG 10 GL9 is compatible with all compact 9mm Glock handguns, as well as sub-compact variants with some protrusion below the grip.
  • Made in the U.S.A.
Add to cart
-5%
Add to compare

Magpul MBUS Pro Sight – Front

Out of stock

Original price was: $94.95.Current price is: $90.20.

The MBUS Pro (Magpul® Back-Up Sight) is a corrosion resistant all-steel back-up sighting solution that delivers maximum functionality and strength with minimum bulk at a price that’s even smaller than its size.

  • All steel construction
  • Steel, rectangular sight post selectable between Match and Standard widths
  • —.040” Match width for increased precision
  • —.060” Standard width for maximum visibility
  • Case hardened and finished with Melonite QPQ™ for extreme resistance to wear and corrosion
  • Mounts on any MIL-STD-1913 Picatinny/STANAG 4694 rail including receiver-height gas blocks
  • Elevation adjustment knob – no tools required
  • Positive detents in both the up and down positions as well as on the elevation knob
  • Standard AR sight height when deployed
View product
-5%
Add to compare

Magpul MBUS Pro Sight – Rear

Out of stock

Original price was: $114.95.Current price is: $109.20.

The MBUS Pro (Magpul® Back-Up Sight) is a corrosion resistant all-steel back-up sighting solution that delivers maximum functionality and strength with minimum bulk at a price that’s even smaller than its size.

  • All steel construction
  • Steel, rectangular sight post selectable between Match and Standard widths
  • —.040” Match width for increased precision
  • —.060” Standard width for maximum visibility
  • Case hardened and finished with Melonite QPQ™ for extreme resistance to wear and corrosion
  • Mounts on any MIL-STD-1913 Picatinny/STANAG 4694 rail including receiver-height gas blocks
  • Elevation adjustment knob – no tools required
  • Positive detents in both the up and down positions as well as on the elevation knob
  • Standard AR sight height when deployed
View product
Add to compare

Magpul M3 PMAG – 10 Round .308/7.62 Magazine

Out of stock

$24.63

The 7.62×51 NATO (.308 Winchester) PMAG 10 LR/SR GEN M3 is a lightweight, cost effective, high reliability magazine for SR25/M110 pattern rifles in the smallest possible magazine size.

  • Optimized for use with 7.62×51 M118LR or other .308 Winchester ammunition with a max OAL of 2.830″
  • Commercial rifle compatibility includes the Armalite AR-10A, Colt LE901-16S, CORE Rifle Systems CORE30, JP Enterprises LRP-07, KAC SR25, LaRue OBR, Les Baer .308, LMT .308 MWS, LWRCI REPR, Mega Arms MATEN, Noveske Gen III N6, POF P-308, Ruger SR-762, Ruger Precision Rifle, S&W M&P10, SIG716, and others*
  • True 10-round capacity that does not require limiters, pins, rivets, etc.
  • Next-generation impact and crush resistant polymer construction
  • Constant-curve internal geometry for smooth feeding
  • Anti-tilt, self-lubricating follower for increased reliability
  • High-quality stainless steel spring for corrosion resistance
  • Flared floorplate aids magazine handling and disassembly yet is slim enough for use with many pouches
  • Multi-use Impact/Dust Cover minimizes debris intrusion and protects cartridges from potential damage during storage and transit
View product
Add to compare

Magpul M3 PMAG – 10 Round .223/5.56 Magazine

Out of stock

$16.24

The PMAG 10 GEN M3 is a 10-round 5.56×45 NATO (.223 Remington) polymer magazine for AR15/M4 compatible weapons

  • True 10-round capacity that does not require limiters, pins, rivets, etc.
  • Next-generation impact and crush resistant polymer construction
  • Wide compatibility with non Colt-spec platforms
  • Anti-tilt follower and constant-curve internal geometry for increased reliability
  • Long life stainless steel spring
  • Over-travel insertion stop on the spine
  • Flared floorplate aids magazine handling and disassembly
  • Pop-off Impact/Dust Cover to minimize debris intrusion and for ammunition protection in storage and transit
View product
-5%
Add to compare

Magpul M-LOK MVG Vertical Grip

Out of stock

Original price was: $22.95.Current price is: $21.80.

The M-LOK MVG is a light weight, inexpensive vertical foregrip that attaches directly to M-LOK compatible hand guards and forends with no additional Picatinny rails required. Made from the same high quality polymer as other Magpul products, the M-LOK MVG uses the new Magpul TSP texture for positive control in all environments.

  • With rounded contours and a shorter length, it has been optimized for use with the “thumb break method” of shooting and can also be used as a traditional vertical foregrip.
  • All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.
  • Weight, w/hardware: 1.4 oz.
  • Length: 3.0″
  • Made in U.S.A.
Select options This product has multiple variants. The options may be chosen on the product page
-5%
Add to compare

Magpul Enhanced Aluminum Trigger Guard for AR15/M4

Out of stock

Original price was: $22.95.Current price is: $21.80.

The Enhanced Trigger Guard is a black anodized aluminum drop in replacement for the AR15/M4 weapons platform. It features a shallow “V” shape for better use of gloves in tactical shooting or cold weather operations.

  • The Enhanced Trigger Guard is non-folding, has rounded edges, and fills the annoying “gap” at the rear of the standard trigger guard.
  • All mounting hardware included.
  • Made in U.S.A.
View product
Add to compare

Magpul RSA QD – Quick Detach Rail Sling Attachment

Out of stock

$35.28

The RSA QD provides a forward attachment point for the Magpul MS4® Sling and other push-button QD slings. Made from corrosion resistant steel, mounts on 1913 Picatinny rail, and places the attachment point at an angle optimized for comfortable two-point sling use while maintaining easy push-button access.

View product
-5%
Add to compare

Magpul SSG Selector Set for FN SCAR MK16/16s

Out of stock

Original price was: $19.95.Current price is: $18.95.

The Magpul SSG Selector Set are drop-in, dual sided selectors for the FN SCAR family of weapons. Designed at the request of a deploying military unit who wanted more positive control of the selector, the SSG are compatible with military-issue select fire MK16 & MK17 weapons, as well as the civilian semi-automatic SCAR 16S & 17S rifles.

  • SSG are direct replacements for the OEM selectors
  • Require no permanent modification to the weapon system.
  • Simple install utilizing existing set screw (not supplied).
  • Made in U.S.A.
View product
-5%
Add to compare

Magpul RSA Rail Sling Attachment

Out of stock

Original price was: $29.95.Current price is: $28.45.

The RSA provides a low profile forward sling attachment point for the Magpul MS2 or MS3 and other clip-in systems. Made from nitrocarburized steel for wear and corrosion resistance, the RSA attaches to any 1913 Picatinny rail and has been proven to withstand stress tests of over 300 pounds while only weighing a mere 1.3 ounces.

  • All steel construction
  • Works on any MIL-STD-1913 Picatinny/STANAG 4694 rail
  • Case hardened and finished with a ferritic nitrocarburizing process for extreme resistance to wear and corrosion
  • Made in U.S.A.
View product
Add to compare

Magpul Enhanced AR Magazine Release

Out of stock

$21.15

The Magpul AR Enhanced Magazine Release provides an enlarged contact surface for quick and fumble free magazine changes. With easy bolt-on installation with no gunsmithing required, the Enhanced AR Magazine Release is made of Mil-Spec hard anodized aluminum to provide durability and light weight.

  • Machined from mil-spec anodized aluminum
  • Two-piece construction for easy installation and reduced profile
  • Provides larger contact surface for positive activation
  • Compatible with most 5.56 and 7.62 pattern receivers
  • Made in U.S.A.
View product
-4%
Add to compare

Magpul B.A.D. Lever – Battery Assist Device for AR15/M4

Out of stock

Original price was: $32.95.Current price is: $31.56.

Designed to considerably improve the speed and efficiency of the AR15/M16 bolt catch, the B.A.D. Lever quickly addresses reloading and malfunction clearance shortcomings of AR15/M16 platforms by extending a paddle to the right side of the weapon, allowing manipulation of the bolt stop from the fire control/ready position with the right-hand trigger finger. Made from milspec-anodized aluminum, the B.A.D. Lever attaches to the standard AR15/M16 bolt release without permanent modification to the weapon. Functional for both left and right-handed shooters, the B.A.D. Lever also allows traditional bolt catch manipulation according to the AR15/M16 manual of arms. All mounting hardware included.

  • Compatible with standard mil-spec forged AR15/M16 receivers*
  • Thin, anti-snag profile and textured surface still allows for traditional manipulation of the bolt catch while maintaining unobstructed access to the trigger
  • Attaches to the existing bolt catch paddle via one screw
  • Machined from durable billet 6061-T6 aluminum
  • Finished with MIL-A-8625F, Type III, Class 2 hard anodizing with manganese phosphate on the screw per MIL-DTL-16232G
  • Torx® mounting screw with Nyloc® Blue patch prevents back out under recoil (Torx wrench included)
  • Made in U.S.A.
View product
Add to compare

Magpul M-LOK QD Sling Mount

Out of stock

$28.16

The Magpul M-LOK QD Sling Mount provides a forward attachment point for the Magpul MS4 Sling and other push-button QD slings. Machined from Mil-Spec anodized aluminum, the low-profile M-LOK QD Sling Mount features beveled edges to reduce snagging and has an anti-rotation design that prevents swivels from spinning.

All hardware necessary for attachment directly to M-LOK Slots is included and and no modifications to the M-LOK hand guard or forend is required.

  • Mounts to all M-LOK compatible hand guards and forends
  • Accepts any push-button QD swivel as well as the Magpul QDM
  • Machined from Mil-Spec annodized aluminum for durability and light weight
  • Beveled edges reduce snagging
  • Anti-rotation design prevents swivels from spinning
  • Made in U.S.A.
View product
-3%
Add to compare

Magpul M-LOK Aluminum Rail, S Slots

Out of stock

Original price was: $18.95.Current price is: $18.43.

The Magpul Aluminum Rail is a 3-slot rail section for M-LOK compatible handguards and forends, allowing for the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc.

  • Machined from milspec-anodized aluminum
  • M-LOK Rail Sections feature beveled ends to reduce snagging and eliminate sharp corners and edges.
  • All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.
  • 3 Slots, max overall length of 1.6″.
  • Made in U.S.A.
View product
Add to compare

Magpul M-LOK Aluminum Rail, 5 Slots

Out of stock

$26.85
View product
-1%
Add to compare

Magpul M-LOK Hand Stop Kit

Out of stock

$24.77 – $25.15

The Magpul M-LOK Hand Stop Kit serves as a lightweight, low-profile M-LOK slot index point for improved weapon control, or as a forward stop to prevent the shooter’s hand from reaching the hot front sight assembly or muzzle.

The kit includes one M-LOK Hand Stop, one M-LOK Index Panel, and one M-LOK Rail Cover Type 2 for the individual user to configure their kit as they desire. Also included in this kit is an adapter for use with Magpul M-LOK equipped polymer Hand Guards/Forends as well as other wider profile aluminum hand guards.

  • Made in U.S.A.
  • Light weight, low-profile M-LOK slot index point for improved weapon control
  • Forward stop to prevent the shooter’s hand from reaching the hot front sight assembly or muzzle
  • Aggressive TSP Texture for enhanced weapons control
Select options This product has multiple variants. The options may be chosen on the product page
Sale
Add to compare

Magpul MOE SL-K Carbine Stock (Mil-spec)

Out of stock

$44.93 – $199.98

A drop-in replacement buttstock for AR15/M4 mil-spec carbine buffer tubes, the SL-K is designed for compact PDW style weapons or users desiring a small and light stock. Features a short and slim profile, a smaller rubber butt-pad with rolled toe for easy shouldering and sure grip, and a 1.25” footman’s loop with the ability to accept an optional M-LOK QD Sling Mount for push-button style QD sling swivels. A new, unique, ambidextrous release latch minimizes rattle on the receiver extension without requiring additional locks, levers, or springs*.

  • Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, LMT, Ruger, S&W, SIG, and others
  • Sloping cheek weld combines a slim profile with user comfort
  • Dual-side release latch provides easy adjustment while remaining anti-snag
  • Premium chrome-silicon lock spring provides positive locking and long service life
  • Compact rubber butt-pad offers an anti-slip surface and increases impact protection
  • Rollover on the toe allows for easier shoulder transitions and better fit when using body armor
  • Compatible with Magpul ASAP®, ASAP® QD, and other receiver-mount sling attachments
  • 1.25” Footman’s Loop for sling mounting, and also accepts the M-LOK QD Sling Mount for push-button sling attachment (sold separately)
    NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec and commercial-spec. The MOE SL-K will only fit with the common mil-spec tube.
Select options This product has multiple variants. The options may be chosen on the product page
-5%
Add to compare

Magpul MOE SL “Slim Line” Grip for AR-15, M4

Out of stock

$19.90 – $20.54

Similar to the MOE-K2, the MOE SL Grip (MOE Slim Line) is a drop-in upgrade for AR15/M4 pistol grips with a more vertical grip angle optimized for short LOP weapons that bring the primary hand in closer to the shooter’s body.

  • Replacement for AR15/M4 pistol-grip*
  • More vertical grip angle than standard A2 grips
  • Beavertail backstrap for enhanced ergonomics
  • Slimmer thickness for a slightly smaller feel
  • Aggressive TSP texture (Trapezoidal Surface Projections)
  • Made in U.S.A.
Select options This product has multiple variants. The options may be chosen on the product page
-5%
Add to compare

Magpul MOE-K2+ Grip for AR-15, M4

Out of stock

Original price was: $24.95.Current price is: $23.70.

The MOE-K2+ Grip combines reinforced polymer body construction with comfortable, wrap-around rubber overmolding for maximum weapon control in adverse environments. Similar in concept to the smaller MOE-K, the MOE-K2 is a drop in upgrade for AR15/M4’s that offers a more vertical grip angle, but in a full-size grip design. The steeper vertical grip angle is optimized for use on PDW (Personal Defense Weapon) configurations and improves comfort and control on short LOP rifles that bring the primary hand in closer to the shooter’s body. With the rubber overmolding for positive weapon control, compatibility with optional Storage Cores for gear stowage, and a unique backstrap design for proper trigger finger placement, the K2+ brings modern styling, ergonomics, and comfort to the AR platform. All mounting hardware and a basic grip cap included. Made in U.S.A.

  • Replacement for AR15/M4 pistol-grip*
  • One-piece reinforced polymer construction with wrap-around rubber overmolding
  • More vertical grip angle than standard A2 grips
  • Unique backstrap design for proper trigger finger placement
  • Hard-polymer bottom edge to reduce equipment snags or grip damage
  • Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage
Select options This product has multiple variants. The options may be chosen on the product page
Load more products
Loading...