Black

The LCSMK2J is the absolute best Polymer mounting solution for tape/pressure switches used to operate the Streamlight HLX ProTac Series Weaponlights.

• The LCSmk2j features an “Early Exit” feature for the cables. This allows you to run the cable halfway through a given cable channel and then exit the bracket “early” if need more cable slack for a given setup.
• The LCS Series Locks up 100% to your weapon. Zero movement. Zero play. Virtually indestructible.
• A low-profile design with heavily radiused/chamfered edges ensures comfort and ergonomic function.
• Length: 3.5″
• Width: 1.32″
• Height: .575″ (switch sits .052″ above the top edge of rail)
• 100% MADE IN THE USA

Blue Force Gear Sling Snap Hooks are fast, secure sling attachment hardware that allows quick installation and removal of any sling they are attached too. The Sling Snap Hook has a 1″ sling slot and fits on any Padded or unpadded Vickers Combat Applications Sling. As with all Blue Force Gear, it is made with excellence in the USA and carries a limited lifetime warranty.

• Sling Snap Hooks are best suited for smaller sling eyelets found on H&K weapons, SCARs, SIGs, or other smaller eyelets.
• ***Not recommended for elongated AK eyelets as they may accidentally disengage if rotated at the appropriate angle. A better option for front eyelets on AKs are the Universal Wire Loops™ or MASH Hooks ***
• Sizing: 1″ Sling Loop (Use on 1″ or 1.25″ sling webbing)
• Build: Finished steel

Designed to meet the needs of rifle sling applications that require a quick-on feature with a spring-loaded retention gate.

• The body is made from steel and has a slot designed to accept 1” webbing from slings.
• Made in the United States

The Patent Pending Padded Vickers Sling combines the tactical sling capability of the Vickers Sling with the added comfort of a padded rear section. The 2” inline pad doesn’t move up or down the sling and is made from closed-cell foam that won’t separate or gain water weight. The front section with the Quick Adjuster allows the user to instantly lengthen and shorten the sling – quickly transitioning from a “hands-free” carry to a shooting position with a simple pull of the Adjuster.

• 1.25” webbing can be looped through sling swivels, buttstock slots, or combined with sling hardware (available separately)
• Fits standard M4 carbines and other rifles
• Can be mounted upside down (Adjuster to the rear) on traditional bolt action rifles and shotguns for a “muzzle up” carry
• Military Applications
• Plastic nylon adjuster/tri-glides

SOLO Lite 11.7″ M-LOK

• 11.7′ Exact Top Rail Length
• ​1.3″ ID
• Weight 10.1 oz
• Mil-Spec Hardcoat Anodize
• 7075 Barrel nut w/ Hardcoat Anodize
• Free Floating Design
• Grade 8 Fasteners
• Anti Rotation- Anti Slip Design
• No Special Tools Need for Barrel Nut
• Continuous top rail design
• Mil-Spec 1913 Mounting rails

The Hybrid contour is a mid-weight barrel that offers a perfect balance between weight and intelligently distributed barrel material for excellent heat absorption and consistent harmonics.

• Dimensions: 25 x 3 x 3in
• Length: 16″
• Contour/Profile: Hybrid
• Gas Length: Mid-Length
• Gas Block Diameter: .0.750″
• Muzzle Thread: 1/2 x 28
• Chamber: 223 Wylde
• Twist: 1-8
• Grooves: 6 Groove
• Material: 4150 CrMoV
• Finish: Chrome-lined, Phosphate
• Weight: 2.05 lbs.

The Ultralight contour barrel is a lightweight option for those who require a hard-use barrel without any added weight.

• Dimensions: 25 x 3 x 3in
• Length: 12.5″
• Contour/Profile: Ultralight
• Gas Length: Carbine
• Gas Block Diameter: .0.750″
• Chamber: 223 Wylde
• Twist: 1-8
• Grooves: 6 Groove
• Material: 4150 CrMoV
• Finish: Chrome-lined, Phosphate
• Exact Weight: 12.5″ 1.40 lbs.