Brand
MagpulMagpul 37
OD Green
Magpul MOE® X-22 Stock for Ruger® 10/22®
Out of stock
Price range: $67.00 through $68.61
Magpul MOE® PR Carbine Stock – Mil-Spec
Out of stock
Price range: $46.27 through $47.49
Magpul DT Carbine Stock Mil-Spec
Out of stock
Price range: $62.15 through $63.99
Magpul MBUS 3 Sight – Front
Out of stock
Price range: $38.86 through $41.54
Magpul MBUS 3 Sight – Rear
Out of stock
Original price was: $59.95.$56.95Current price is: $56.95.
Magpul Ranger Plate for USGI Mags – 3 Pack
Out of stock
Price range: $27.66 through $29.67
Magpul PRS Lite Stock Mil-Spec
Out of stock
Original price was: $119.95.$113.94Current price is: $113.94.
Magpul DAKA Volume Pouch
Out of stock
Price range: $36.90 through $37.33
Magpul Hunter 700L Stock for Remington Long Action
Out of stock
Original price was: $289.95.$275.45Current price is: $275.45.
Magpul Hunter 700 Stock for Remington Short Action
Out of stock
Original price was: $269.95.$256.45Current price is: $256.45.
Magpul Pro 700 Folding Stock Chasis
Out of stock
Original price was: $999.95.$949.95Current price is: $949.95.
Magpul Pro 700 Fixed Stock Chassis
Out of stock
Original price was: $899.95.$854.95Current price is: $854.95.
Magpul MOE SL-S Carbine Stock (Mil-Spec)
Out of stock
Price range: $85.45 through $85.99
Magpul AFG-1 Angled Fore Grip for 1913 Picatinny
Out of stock
Original price was: $34.95.$33.20Current price is: $33.20.Compatible with most any M1913 Picatinny-railed handguard, the Magpul AFG (Angled Fore Grip) takes into account natural body mechanics and provides a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter’s hand high on the centerline of the bore, unlike conventional vertical fore grips, the AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots
- Polymer Three-Piece Design
- Interchangeable finger shelf that allows for a flat “A1-Style” surface on an “A2-Style” finger nub
- Mounts to MIL-STD-1913 Picatinny and NATO STANAG 4694 rails. Minimum of 4″ recommended
- Height, over rail 1.75 in.
- Length 5.55 in.
- Weight 2.92 oz.
- Width, maximum: 1.77 in.
Magpul MOE Fixed Carbine Stock – Mil-Spec
In stock
Price range: $37.95 through $41.07The MOE Fixed Carbine Stock – Mil-Spec Model (Magpul Original Equipment) provides an inexpensive, fixed, non-collapsing stock option for Mil-Spec size carbine-length buffer tubes. The MOE Fixed Carbine Stock has a slim profile, improved cheek weld, and multiple sling attachment options, and is compatible with ASAP® Plates and PRS® Extended Rubber Butt-Pad. Installation is non-armorer and does not require the castle nut or lock plate to be removed.
- Durable Polymer Construction, Provides 12.2″ length of pull
- Rubber Butt Pad: Offers anti-slip surface and increases impact protection. Compatible with ASAP Plate & PRS Extended Rubber Butt-Pad
- Push-Button QD Sockets: With integrated 1.25″ sling loops for additional mounting options and left/right side push-button QD Sling Mount Kits (not included)
- Compatibility: Fixed length for standard Mil-Spec sized M4 Carbine receiver extension tubes (not included) from manufacturers such as Colt, LMT, Ruger, S&W, SIG, and others (please see the note below)
Magpul MOE SL Carbine Stock (Mil-Spec) for AR15/M16
Out of stock
Price range: $61.70 through $64.27The MOE SL Stock – Mil-Spec Model (MOE Slim Line) is a drop-in replacement buttstock for AR15/M4 carbines using Mil-Spec sized receiver extension tubes. Designed for the modern battlefield, the sleek profile, dual-side release latches, rolled toe, and angled rubber butt-pad are optimized for use with body armor or modular gear and provides for efficient shoulder transitions.
- Platform: AR-15, M4, M16, AR-10, LR-308, SR-25
- Compatibility: Mil-Spec extension tube (not included)
- Material: Polymer
- LOP, M4 Collapsed ~10.8 in.
- LOP, M4 Extended ~14.1 in.
- LOP Adjustment Range 3.3 in.
- Length, max 7.2 in.
- Weight 9.6 oz.
Magpul ACS-L Carbine Stock (Mil-Spec)
Out of stock
Original price was: $84.95.$80.70Current price is: $80.70.
Magpul MOE AK Grip
Out of stock
Price range: $19.90 through $20.56A drop-in upgrade for AK-pattern pistol grips, the MOE AK Grip is designed to improve ergonomics and comes with an aggressive TSP texture for positive weapon control.
- Fits both milled and stamped receivers
- One-piece reinforced polymer construction
- Storage core capability accepts optional cores
- Aggressive tsp texture
Magpul MOE Carbine Stock (Mil-Spec) for AR15/M16
Out of stock
Price range: $44.93 through $49.44The MOE Carbine Stock – Mil-Spec model (Magpul Original Equipment) is a drop-in replacement buttstock for AR15/M16 carbines using Mil-Spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation. The Mil-Spec Model includes a standard 0.30″ thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.
- Platform: AR10, AR15, M4, M16, M110, SR25
- Compatibility: Mil-Spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, LMT, Ruger, S&W, SIG, and others
- LOP, M4 Collapsed ~10.5 in.
- LOP, M4 Extended ~13.8 in.
- LOP Adjustment Range 3.3 in.
- Length, max 6.9 in.
- Weight 8.0 oz.
- Weight, w/ receiver extension 12.0 oz.
Magpul MOE+ Grip for AR-15, M4
Out of stock
Original price was: $24.95.$23.70Current price is: $23.70.The MOE+ Grip combines reinforced polymer body construction with comfortable, wrap-around rubber overmolding for maximum weapon control in adverse environments. With a similar shape to a ‘medium’ sized MIAD, this AR15 / M4 drop-in design features a hard-polymer bottom edge to reduce the possibility of equipment snags or grip damage. The MOE+ Grip accepts optional Storage Cores for gear stowage and includes a basic grip cap.
- Rubber overmold on reinforced poymer construction
- Hard polymer bottom edge prevents snags and grip damage
- Storage core capability accepts optional cores
- Beavertail backstrap for enhanced ergonomics
- All mounting hardware included.
- Made in the USA.
Magpul MOE Grip for AR-15, M4
Out of stock
Price range: $26.85 through $28.07
Magpul ACS Carbine Stock (Mil-Spec)
Out of stock
Original price was: $94.95.$90.20Current price is: $90.20.
Magpul PRS GEN 3 Precision Adjustable Stock
Out of stock
Original price was: $259.95.$246.95Current price is: $246.95.
Magpul STR Carbine Stock (Mil-Spec)
Out of stock
Price range: $80.70 through $80.73The Magpul STR (Storage/Type Restricted) Carbine Stock – Mil-Spec is a drop-in replacement buttstock for AR15/M4 carbines using Mil-Spec sized receiver extension tubes. A storage-capable version of the CTR®, the STR has improved cheek weld and two water-resistant battery tubes on a compact, reinforced polymer A-frame design.
- Platform: AR10, AR15, M4, M16, M110, SR25
- Compatibility: Mil-Spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, Armalite, S&W, LMT, and others
- LOP, M4 Collapsed ~10.9 in.
- LOP, M4 Extended ~14.2 in.
- LOP Adjustment Range 3.3 in.
- Length, max 7.3 in.
- Weight 12.3 oz.
- Weight, w/ receiver extension 16.3 oz.
- Width, max 2.6 in.
Magpul UBR Gen 2 Collapsible Stock
Out of stock
Original price was: $199.95.$190.39Current price is: $190.39.
Magpul M-LOK Rail Covers – Type 2
Out of stock
Price range: $20.65 through $23.88M-LOK Type 2 Rail Covers are low-profile, two-piece covers that install directly onto most M-LOK aluminum hand guards (non-polymer). These M-LOK covers are non-orientation specific, which allows the user to mount them in any direction desired without affecting function. Not compatible with MAGPUL MOE M-LOK, MOE SL, and SGA forends, and may not be compatible with free-float handguards that have a wider and flatter profile, as they will not seat deep enough to allow the center portion to lock-in.
- Includes six panels, each covering one M-LOK slot.
- Made in the USA.
- Non-orientation specific: No up / down, left / right, front / back orientation
- Contact surfaces made up of TSP
- Low Profile: Covers barely protrude more than 1/8″ above the rail surface
- Simple install and uninstall: Using a simple, pointed tool, covers can be installed or uninstalled in seconds
Magpul M-LOK MVG Vertical Grip
Out of stock
Original price was: $22.95.$21.80Current price is: $21.80.The M-LOK MVG is a light weight, inexpensive vertical foregrip that attaches directly to M-LOK compatible hand guards and forends with no additional Picatinny rails required. Made from the same high quality polymer as other Magpul products, the M-LOK MVG uses the new Magpul TSP texture for positive control in all environments.
- With rounded contours and a shorter length, it has been optimized for use with the “thumb break method” of shooting and can also be used as a traditional vertical foregrip.
- All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.
- Weight, w/hardware: 1.4 oz.
- Length: 3.0″
- Made in U.S.A.
Magpul M-LOK Hand Stop Kit
Out of stock
Price range: $24.77 through $25.15The Magpul M-LOK Hand Stop Kit serves as a lightweight, low-profile M-LOK slot index point for improved weapon control, or as a forward stop to prevent the shooter’s hand from reaching the hot front sight assembly or muzzle.
The kit includes one M-LOK Hand Stop, one M-LOK Index Panel, and one M-LOK Rail Cover Type 2 for the individual user to configure their kit as they desire. Also included in this kit is an adapter for use with Magpul M-LOK equipped polymer Hand Guards/Forends as well as other wider profile aluminum hand guards.
- Made in U.S.A.
- Light weight, low-profile M-LOK slot index point for improved weapon control
- Forward stop to prevent the shooter’s hand from reaching the hot front sight assembly or muzzle
- Aggressive TSP Texture for enhanced weapons control
Magpul MOE SL-K Carbine Stock (Mil-spec)
Out of stock
Price range: $44.93 through $199.98A drop-in replacement buttstock for AR15/M4 mil-spec carbine buffer tubes, the SL-K is designed for compact PDW style weapons or users desiring a small and light stock. Features a short and slim profile, a smaller rubber butt-pad with rolled toe for easy shouldering and sure grip, and a 1.25” footman’s loop with the ability to accept an optional M-LOK QD Sling Mount for push-button style QD sling swivels. A new, unique, ambidextrous release latch minimizes rattle on the receiver extension without requiring additional locks, levers, or springs*.
- Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, LMT, Ruger, S&W, SIG, and others
- Sloping cheek weld combines a slim profile with user comfort
- Dual-side release latch provides easy adjustment while remaining anti-snag
- Premium chrome-silicon lock spring provides positive locking and long service life
- Compact rubber butt-pad offers an anti-slip surface and increases impact protection
- Rollover on the toe allows for easier shoulder transitions and better fit when using body armor
- Compatible with Magpul ASAP®, ASAP® QD, and other receiver-mount sling attachments
- 1.25” Footman’s Loop for sling mounting, and also accepts the M-LOK QD Sling Mount for push-button sling attachment (sold separately)
NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec and commercial-spec. The MOE SL-K will only fit with the common mil-spec tube.
Magpul MOE SL “Slim Line” Grip for AR-15, M4
Out of stock
Price range: $19.90 through $20.54Similar to the MOE-K2, the MOE SL Grip (MOE Slim Line) is a drop-in upgrade for AR15/M4 pistol grips with a more vertical grip angle optimized for short LOP weapons that bring the primary hand in closer to the shooter’s body.
- Replacement for AR15/M4 pistol-grip*
- More vertical grip angle than standard A2 grips
- Beavertail backstrap for enhanced ergonomics
- Slimmer thickness for a slightly smaller feel
- Aggressive TSP texture (Trapezoidal Surface Projections)
- Made in U.S.A.
Magpul MOE-K2+ Grip for AR-15, M4
Out of stock
Original price was: $24.95.$23.70Current price is: $23.70.The MOE-K2+ Grip combines reinforced polymer body construction with comfortable, wrap-around rubber overmolding for maximum weapon control in adverse environments. Similar in concept to the smaller MOE-K, the MOE-K2 is a drop in upgrade for AR15/M4’s that offers a more vertical grip angle, but in a full-size grip design. The steeper vertical grip angle is optimized for use on PDW (Personal Defense Weapon) configurations and improves comfort and control on short LOP rifles that bring the primary hand in closer to the shooter’s body. With the rubber overmolding for positive weapon control, compatibility with optional Storage Cores for gear stowage, and a unique backstrap design for proper trigger finger placement, the K2+ brings modern styling, ergonomics, and comfort to the AR platform. All mounting hardware and a basic grip cap included. Made in U.S.A.
- Replacement for AR15/M4 pistol-grip*
- One-piece reinforced polymer construction with wrap-around rubber overmolding
- More vertical grip angle than standard A2 grips
- Unique backstrap design for proper trigger finger placement
- Hard-polymer bottom edge to reduce equipment snags or grip damage
- Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage
Magpul MOE-K2 Grip for AR-15, M4
Out of stock
Original price was: $20.95.$19.90Current price is: $19.90.Similar in concept to the MOE-K, the MOE-K2 is a drop in upgrade for AR15/M4’s that offers a more vertical grip angle, but in a full-size grip design. The steeper vertical grip angle is optimized for use on PDW (Personal Defense Weapon) configurations and improves comfort and control on short LOP rifles that bring the primary hand in closer to the shooter’s body. With an aggressive TSP texture for positive weapon control, compatibility with optional Storage Cores for gear stowage, and a unique backstrap design for proper trigger finger placement, the K2 brings modern styling and ergonomics to the AR platform. All mounting hardware and a basic grip cap included.
- Replacement for AR15/M4 pistol-grip*
- One-piece reinforced polymer construction
- More vertical grip angle than standard A2 grips
- Unique backstrap design for proper trigger finger placement
- Aggressive TSP texture (Trapezoidal Surface Projections) for positive weapon control in all environments
- Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage
- Made in U.S.A.