NOTE: WE ARE NO LONGER SHIPPING FIREARM PARTS OR ACCESSORIES TO CALIFORNIA
Used - Excellent Condition
Open Box BCM Gunfighter Short Vertical ForeGrip VG-S Picatinny
Out of stock
Original price was: $45.00.$35.60Current price is: $35.60.- Low-profile length for increased mobility and decreased “snag” factor.
- The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
- Can be mounted in reverse angle to increase control when grabbing handguard and grip
- Flat sides give better yaw control to the shooter during firing and non-firing manipulations.
- Aggressive texture and storage volume combined with modular design to allow improvements and adaptation in the future.
- Cross bolt designed to work with improvised tools (such as a quarter) and allow for easy adjustment or re-tightening.
- Reversible clamps allow user to set up fasteners to reside on either side.
- Spring-loaded clamps makes installation and removal easier.
- Made in the U.S.A., and manufactured from high quality, impact resistant polymers.
*Test fit to ensure proper function (may display attributes consistent with this QC process)
Select options
This product has multiple variants. The options may be chosen on the product page
Open Box Arisaka Defense Low Profile Finger Stop – Picatinny
Out of stock
Original price was: $25.00.$23.41Current price is: $23.41.The Arisaka Finger Stop was developed as a low profile, minimal control accessory. This version is for 1913 Picatinny rails. It has a slim profile which is ergonomically designed to be located between your index and middle fingers. This typically places it further forward on the handguard, which means it doesn’t get in the way when transitioning to kneeling or prone shooting positions, where most people move their support hand towards the rear.
- Height: 0.75” above 1913 Picatinny rail
- Width: 0.68″
- Weight: 0.4 oz
- CNC machined from 6061-T6 aluminum
- MIL-A-8625 Type III hard coat anodized
- Requires a 3/32″ Allen wrench for installation (not included)
- Made in the USA.
Select options
This product has multiple variants. The options may be chosen on the product page
Open Box Arisaka Defense Offset Picatinny Mount – M-LOK
In stock
Original price was: $60.00.$49.02Current price is: $49.02.The Patent Pending Arisaka Offset Picatinny Mount is a combination of our Offset Scount Mount and Picatinny adapter, and is meant for use with Picatinny based lights like the Surefire X300 or Inforce WML, plus other rail mounted accessories.
- Length: 1.77″
- Height: 0.20″ (at Surefire Scout Light mounting point)
- Weight: 1.0 oz
- The mount is CNC machined from 6061-T6 aluminum and MIL-A-8625 Type III hard coat anodized
- Requires a 5/64″ Allen wrench for installation (not included).
- Made in the USA
Select options
This product has multiple variants. The options may be chosen on the product page
Open Box Arisaka Defense Side Scout Mount Picatinny (SSM-P)
Out of stock
Price range: $33.11 through $38.05The Arisaka Side Scout Mount (SSM) is designed for use with Surefire Scout Lights, the Arisaka 300 and 600 Series, and the Streamlight Protac Rail Mount lights. It replaces the stock Picatinny rail adapter with a low profile mount that tucks the light underneath either side of the ATPIAL laser/illuminator series, including the ATPIAL-C, AN/PEQ15, and LA-5/PEQ. It will also allow the light to clear the QD lever on the Steiner DBAL I2, A3, and D2.
Light Compatibility:
- Surefire M300A. M300B, M300C, M600B, M600C, M600P, M600U, M600V, M600DF,
- Streamlight Protac Rail Mount 1, 2 and HL-X
- Arisaka 300 and 600 Series.
Select options
This product has multiple variants. The options may be chosen on the product page
Open Box Cloud Defensive Light Control System for Streamlight ProTac Switch – LCSMK2
In stock
Price range: $50.19 through $64.87The absolute best mounting solution for tape/pressure switches used to operate the Streamlight HLX ProTac Series Weaponlights. No more rubber bands. No more zip ties or wire or Velcro or duct tape. No more makeshift attachment methods that fail you. No more compromising with the light activation your life depends on.
- The LCSmk2k features an “Early Exit” feature for the cables. This allows you to run the cable half-way through a given cable channel and then exit the bracket “early” if need more cable slack for a given setup.
- The LCS Series Locks up 100% to your weapon. Zero movement. Zero play. Virtually indestructible.
- Low-profile design with heavily radiused/chamfered edges ensure comfort and ergonomic function.
- Weight with screws: 53 grams (1.9 oz)
- Length: 3.5″
- Width: 1.32″
- Height: .575″ (switch sits .052″ above top edge of rail)
- 100% MADE IN THE USA
Select options
This product has multiple variants. The options may be chosen on the product page
Open Box Aero Precision Ultralight 30mm Scope Mount
Out of stock
Original price was: $89.99.$69.38Current price is: $69.38.Featuring a rigid, lightweight design, our Ultralight 30mm Scope Mount complements many high-end optic platforms. This scope mount is designed to fit AR type upper receivers with Mil-Spec 1913 Picatinny rails and features a cross-slot keyway that offers excellent recoil protection. The Ultralight Scope Mounts free you from unnecessary bulk, providing one of the lightest mounts in the industry.
- Made In America
- Finish Anodized
- Material 6061 T6 extruded aluminum construction
- Scope Ring Size 30mm
- Scope Mount Profile Standard
- Weight (oz) 3.27oz
- Designed for AR type upper receivers
- Screw Torque – 15 in-lbs
Select options
This product has multiple variants. The options may be chosen on the product page
Open Box – SLR Rifleworks IB Mount for Aimpoint T1/T2
Out of stock
Price range: $97.79 through $102.98For Aimpoint T1 and T2 optics. Also fits Holosun’s with side turret battery (Note- Holosun side Battery Tray versions will be Lower 1/3rd CW with this mount.)
- Available in Absolute Co-Witness, Lower 1/3rd, and 1.93″ Height
- 7075 Aircraft Grade Aluminum
- Mil-Spec Hardcoat Anodize
- Fits all Picatinny Receiver/ Rails
- Hardware Included
- Ultra-strong with built-in recoil lugs.
- Precision Return to Zero mount
Select options
This product has multiple variants. The options may be chosen on the product page
Open Box – BT46-LW17 PSR Atlas Bipod Standard height w/ ADM QD Lever
Out of stock
Original price was: $319.95.$310.00Current price is: $310.00.The BT46-LW17 PSR (Precision Sniper Rifle) Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-170-S lever. It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. Available in black only.
The BT46-LW17 was selected for the SOCOM PSR (Precision Sniper Rifle) Weapons System.
- Height Range: 4.75 – 9.0″ approximately
- Preloaded Pan: 15 degrees +/-
- Preloaded Cant: 15 degrees +/-
- Fore and Aft pivot limiting Bosses
- 5 leg positions: 0, 45, 90, 135 and 180 degrees
- Non-Rotating Legs: outer leg does not rotate around inner leg
- Larger, stronger inner legs
- Weight: 13.61 ounces
Select options
This product has multiple variants. The options may be chosen on the product page
Open Box – Reptilia DOT Mount Lower 1/3 Co-Witness for Trijicon MRO
Out of stock
Original price was: $94.95.$74.60Current price is: $74.60.The DOT Mount™ by Reptilia is a lightweight, slim-line mounting solution for a variety of red dot optics.
- Machined from billet 7075-T6 aluminum
- Milspec Type III hard anodized finish
- Lower 1/3 co-witness
- Spring-loaded nitrided steel clamp
- Anti-snag design
- 100% made in the USA
- 1.5 oz
Select options
This product has multiple variants. The options may be chosen on the product page
Open Box Reptilia DOT Mount for Aimpoint ACRO
Out of stock
$74.60The DOT Mount™ by Reptilia is a lightweight, slim-line mounting solution for a variety of red dot optics. Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish, the DOT Mount attaches to any M1913 Picatinny rail, and offers lower 1/3 co-witness with standard AR15-style back-up sights. Its spring-loaded nitrided steel clamp and mounting bolt simplify the installation process, and sit flush with the body of the mount for a low-profile, anti-snag design.
- Type III hardcoat anodized 7075-T6 aluminum
- Nitrided 4140 steel
- 2 oz
- 100% made in the USA
- Lifetime warranty
Select options
This product has multiple variants. The options may be chosen on the product page
Open Box – Geissele Super Precision Scope Mount – 30mm – Extended – Standard Height
Out of stock
Price range: $302.38 through $325.24The AR-15/M4 Super Precision series of scope mounts are optimized for use with an AR-15/M4 upper.
- Mounting surface spans 7 picatinny sections and utilizes 4 shear lugs
- Mounts use Geissele’s update of the classic nut and bolt method for clamping the mount to the picatinny rail
- Each nut and bolt combination provides 1,400 pounds of clamping force, much more than any lever mounting arrangement
- Tube Size: 30 mm
- Height: Standard (1.54″)
Select options
This product has multiple variants. The options may be chosen on the product page
Open Box Reptilia AUS Optic Mount – 34mm Diameter, 39mm Height
Out of stock
Original price was: $324.85.$242.89Current price is: $242.89.Introducing the AUS Mount for 34mm diameter magnified optics, from Reptilia.
- Material: 7075-T6 aluminum
- Finish: Type III hardcoat anodized
- 34mm rings
- 1.54 inch height
- Made in the USA
Select options
This product has multiple variants. The options may be chosen on the product page
Open Box Cloud Defensive Light Control System for SureFire ST07 – LCSMK1A
Out of stock
Price range: $40.56 through $64.87The LCS Series. No more rubber bands. No more zip ties or wire or Velcro or duct tape. No more makeshift attachment methods that annoy you and fail you. No more compromising with the light activation your life depends on.
- This LCSmk1 mount is designed for the Surefire ST07 Remote Tape Switch for Weapon lights. The same tape switch that is often supplied with the Surefire Scout series. The ST07 Tape Switch fits: SureFire Weapon Lights with plug sockets, including Millennium Universal, Classic Universal, Scout Light fitted with socketed tailcap, X300 and X400 with XT tailcap assembly.
- When properly fitted with the SureFire socketed tail cap, this product is also compatible with the Arisaka Defense Scout Series lights.
Select options
This product has multiple variants. The options may be chosen on the product page
Open Box Daniel Defense Fixed Sights Combo (Front and Rear) – Picatinny
Out of stock
Original price was: $142.00.$140.49Current price is: $140.49.The lightweight, streamlined design of the Daniel Defense A1.5 Fixed Rear Sight makes it the optimum back up iron sight for shooters using today’s most popular reflex optics. Its well thought out design does not impede the use of the charging handle on AR-15 style rifles. The one-piece design makes it easy to install to any Military Specification flat-top upper receiver and the sight is secured to the upper using a slotted fastener which is threaded into a self-locking steel thread insert.
- Aircraft Grade 6061-T6 Aircraft Grade Aluminum
- Military Specification Type III Hard Coat Anodized
- Patented Rock & Lock Attachment Technology
- Made in the USA
Select options
This product has multiple variants. The options may be chosen on the product page
Open Box Forward Controls Design RHF4 Picatinny Handguard – 11.5″
Out of stock
Price range: $247.60 through $271.46RHF4 comes in two lengths, 11.5″ and 9.5″, it is a quad rail handguard based on the successful Centurion Arms C4 rail system. It is a lightweight, rugged, 2-piece free float rail that provides a continuous 12 o’clock rail when installed on the upper receiver. Like the C4 system, RHF4 is a rigid rail that clamps to a standard barrel nut on all AR15, M4, and M16-type weapons systems. This design allows the installation of the rail on an upper assembly without removing the front sight post or permanently attached muzzle devices.
- Material: 6061 T6
- Finish: Type 3 hard coat anodized
- Weight: 12.40 with screws—1.1oz more with standard barrel nut
- Length: 11.5″
- Width: 2.1in
- Height: 2.38
- Inside diameter: 1.37
- Rails: 1913 spec rail
- Fasteners: grade 8 bolts phosphate finished
- Made in the USA
Select options
This product has multiple variants. The options may be chosen on the product page