Advanced performance meets precision machining and ultra-slick styling in the shape of the new E-CT1™ Single Stage Trigger from LANTAC. The trigger features massive improvements over the original with entirely different sear engagement surfaces that remove creep and deliver a super crisp break. Radically different internal geometry also creates insanely short reset and near non-existent over travel that will greatly decrease split times and give you a big advantage over the competition.

The Hammer, Trigger & Disconnector are precision machined from S7 tool steel with a proprietary sear manufacturing process that yields an incredibly smooth engagement surface and all parts are then case hardened before Black Oxide finish.
The CNC machined Aluminum cassette has adjustment set screws built-in that allows the user to set perfect pin tension and the trigger can be installed with standard pins or the threaded screw types seen in previous designs.
The cassette is Type 3 Hard Coat Anodized Class2 Black and then Laser engraved for identification.
Comes complete with Trigger Assembly and Pin Set.
Manufactured and assembled according to strict AS9100 aerospace requirements and quality-assured with the latest technology inspection equipment ECT-1’s are designed for use with AR receivers in 5.56/.223 or 7.62/.308.
Trigger mechanism manufactured by Timney Triggers.

View product

-7%

Add to compare

Lantac USA E-CT1 Single Stage 3.5lb Trigger – Flat

Out of stock

~~$217.99~~ Add to cart to see price

The Hammer, Trigger & Disconnector are precision machined from S7 tool steel with a proprietary sear manufacturing process that yields an incredibly smooth engagement surface and all parts are then case hardened before Black Oxide finish.
The CNC machined Aluminum cassette has adjustment set screws built-in that allows the user to set perfect pin tension and the trigger can be installed with standard pins or the threaded screw types seen in previous designs.
The cassette is Type 3 Hard Coat Anodized Class2 Black and then Laser engraved for identification.
Comes complete with Trigger Assembly and Pin Set.
Manufactured and assembled according to strict AS9100 aerospace requirements and quality-assured with the latest technology inspection equipment ECT-1’s are designed for use with AR receivers in 5.56/.223 or 7.62/.308.
Trigger mechanism manufactured by Timney Triggers.

View product

Add to compare

Lantac USA RPS Ratchet Plate System – Castle Nut & Endplate

Out of stock

$63.00

The LANTAC RPS™ Ratchet Plate System removes the necessity to stake castle nuts in place after fitting. It also provides a QD Sling attachment point directly below the buffer tube. It utilizes a one-piece designed ratcheted tooth and arm, machined directly into the anti-rotation plate itself. The enhanced castle nut has an aggressive grip pattern and radially machined grooves that register with the spring-like arm and tooth on the plate, causing the nut to be retained in place. The nut cannot vibrate loose through firing but can be removed through the use of an armorers wrench if necessary. The teeth and grooves are all internally facing so they cannot be accidentally damaged.

Mil-Spec QD Sling Point
CNC Machined single pass threads.
Simple one-piece ratchet locking plate.
Protected engagement surfaces that cannot be accidentally damaged when installed.
Aggressive Castle Nut grip pattern.
Precision machined from 4140 Steel and QPQ Nitride finished.
Made in the USA.

View product

Add to compare

Lantac USA Ultimate Takedown Pin Set – Titanium

Out of stock

$46.82

Precision machined on Swiss-style turning centers, the Lantac USA Ultimate Takedown Pin sets are manufactured from the highest quality materials to the highest standards. They ship complete with a 3D printed rear pin removal tool (RTT™).

The Patent Pending UPS™ (Ultimate Pin Set) allows the user to install and remove an AR15 Pivot Pin without the use of a tool.
The unique design incorporates a ramped groove that holds the detent in place at the time of installation and another ramp allows access to the retaining slot at 90° to groove.
Pins feature Patent Pending aggressively crenulated heads for improved grip, this facilitates easier removal of the pin from the receiver.
The rear pin features the same retaining slot and ramp, meaning that it can be removed easily by sliding it to a halfway position and then rotating.
This causes the takedown detent to ride up the ramp and onto the outer surface of the pin, making remove extremely simple.

View product

Add to compare

Lantac USA Ultimate Takedown Pin Set – Stainless Steel

Out of stock

$38.24

The Patent Pending UPS™ (Ultimate Pin Set) allows the user to install and remove an AR15 Pivot Pin without the use of a tool.
The unique design incorporates a ramped groove that holds the detent in place at the time of installation and another ramp allows access to the retaining slot at 90° to groove.
Pins feature Patent Pending aggressively crenulated heads for improved grip, this facilitates easier removal of the pin from the receiver.
The rear pin features the same retaining slot and ramp, meaning that it can be removed easily by sliding it to a halfway position and then rotating.
This causes the takedown detent to ride up the ramp and onto the outer surface of the pin, making remove extremely simple.

View product

-5%

Add to compare

Lantac USA Ultimate Forward Assist – Solid

Out of stock

~~$42.99~~ Original price was: $42.99.$40.90Current price is: $40.90.

The UFA-S is precision swiss lathe turned & manufactured from certified 4140 Cr-Mo steel, giving improvements to strength, corrosion resistance and durability over the original materials.

Parts are all heat treated to 48-52 Rc (Rockwell C). In addition, all parts are QPQ (Quench Polish Quench) Nitrided for improved corrosion resistance and enhanced lifespan.
The main Plunger spring is manufactured with the improvement of Stainless 316 music wire (as per ASTM A313) for enhanced corrosion resistance.
Closed-end coils are also used rather than the original open ends for improved seating and alignment. Springs are stress relieved and air-cooled.The Plunger Detent Spring is improved and manufactured from Zinc plated music wire (as per ASTM A288) for enhanced corrosion resistance.
Springs are all stress relieved as per the mil specification.
The assembly is retained within the upper receiver with an improved spiral design pin as opposed to a slotted version for increased strength and durability. Pins are fully certified by the manufacturer.
The design of the Cap has been improved by reducing its diameter and snagging potential, creating a more streamline surface flow when assembled into the upper receiver.
Exterior surface knurling around the cap’s edge allows for positive engagement with a gloved or naked hand while removing the circular ridge that exists on the current design.
The weight of the assembly has also been improved to 20.227g (.7135oz) from 22.481g (.7930oz).
All outer details are bead blasted to create a satin, reduced reflectivity surface prior to finishing.
Manufactured in the USA from USA sourced materials and finishes.