Picatinny

Add to compare

Badger Ordnance Condition Aimpoint Micro RDM Mount – 1.70″ Height

Out of stock

$112.12 – $122.61

The Condition One RDM is the next generation of red dot mounts. Lightweight and minimal while still maintaining the ruggedness Badger Ordnance is known for. Allows the use of any C1 J-arm socket accessory.

Made for optics with the Aimpoint Micro mounting footprint such as the Aimpoint T1/T2.

Specs:

  • Height Over Bore: 2.92″ (AR-15)
  • Height: 1.7″ (Lower 1/3rd)
  • Material: 6061-T6 Aluminum.
  • Finish: Type III Hardcoat Anodized.
  • Weight: 2.1
  • Steel Hardware
  • Made in the USA.
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Badger Ordnance Condition Aimpoint Micro RDM Mount – 1.93″ Height

Out of stock

$110.90 – $112.12

The Condition One RDM is the next generation of red dot mounts. Lightweight and minimal while still maintaining the ruggedness Badger Ordnance is known for. Allows the use of any C1 J-arm socket accessory.

Made for optics with the Aimpoint Micro mounting footprint such as the Aimpoint T1/T2.

Specs:

  • Height Over Bore: 3.15″ (AR-15)
  • Height: 1.90″
  • Material: 6061-T6 Aluminum.
  • Finish: Type III Hardcoat Anodized.
  • Weight: 2.1
  • Steel Hardware
  • Made in the USA.
Select options This product has multiple variants. The options may be chosen on the product page
-5%
Add to compare

EOTech EXPS2 Holographic Weapon Sight – Green Dot

Out of stock

Original price was: $815.00.Current price is: $772.67.

The EXPS2 by EOTech Inc offers true 2-eyes-open shooting and provides an unparalleled targeting experience. The all-purpose EXPS2 features easy-to-adjust side buttons and a quick-detach lever. It has a transversely-mounted lithium 123 battery. The increased height of the EXPS provides iron sight co-witness access in the lower third of the viewing window. Whether you’re using the sight for law enforcement or hunting, the EXPS series sights are the premier optics in the line.

  • Night Vision-Compatibility: None
  • Length/Width/Height: 3.8” x 2.3” x 2.9” (96.5 x 58.4 x 73.7 mm)
  • Weight: 11.2 oz (317.5 g)
  • Water Resistant: Submersible to 10 ft. (3 m)
  • Mount: Quick-detach lever fits both 1” Weaver and MIL-STD-1913 rail
  • Power Source: One 123 lithium battery
  • Battery Life: 600 continuous hours at nominal setting 12 at room temp.
Select options This product has multiple variants. The options may be chosen on the product page
-5%
Add to compare

EOTech XPS2 Holographic Weapon Sight – 1 MOA Red Dot

Out of stock

Original price was: $649.00.Current price is: $615.00.

The XPS2 is the shortest, smallest, and lightest EOTech holographic weapon sight available. Its size and weight offer convenience for shooters and law enforcement officers. It runs on a single CR123 battery. This compact, single-lithium-battery configuration leaves more rail space for rear iron sights or magnifiers. If you’re looking for all these features with the advantage of night vision, check out the XPS3.

  • Reticle: 1 Red Dot (1 MOA)
  • Night Vision Compatibility: None
  • LxWxH: 3.8” x 2.1” x 2.5” (97 x 54 x 64 mm)
  • Weight: 9.0 oz (255 g)
  • Water-Resistant: 10 ft. (3 m) depth
  • Mount: 1” Weaver or MIL-STD-1913 rail
  • Brightness: 20 daylight settings
  • Power Source: 1 x CR123 battery
  • Battery Life: 1,000 continuous hours at nominal setting 12 at room temperature
  • Country of Origin: Made in USA
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Badger Ordnance Condition Aimpoint Micro RDM Mount – 1.43″ Height

Out of stock

$110.05 – $110.90

The Condition One RDM is the next generation of red dot mounts. Lightweight and minimal while still maintaining the ruggedness Badger Ordnance is known for. Allows the use of any C1 J-arm socket accessory.

Made for optics with the Aimpoint Micro mounting footprint such as the Aimpoint T1/T2.

Specs:

  • Height Over Bore: 2.65″ (AR-15)
  • Height: 1.43″ (Co-Witness)
  • Material: 6061-T6 Aluminum.
  • Finish: Type III Hardcoat Anodized.
  • Weight: 2.1
  • Steel Hardware
  • Made in the USA.
Select options This product has multiple variants. The options may be chosen on the product page
-5%
Add to compare

EOTech XPS2 Holographic Weapon Sight – Green Dot

Out of stock

$670.66 – $729.00

The XPS2 is the shortest, smallest, and lightest EOTech holographic weapon sight available. Its size and weight offer convenience for shooters and law enforcement officers. It runs on a single CR123 battery. This compact, single-lithium-battery configuration leaves more rail space for rear iron sights or magnifiers. If you’re looking for all these features with the advantage of night vision, check out the XPS3.

  • Night Vision Compatibility: None
  • LxWxH: 3.8” x 2.1” x 2.5” (97 x 54 x 64 mm)
  • Weight: 9.0 oz (255 g)
  • Water-Resistant: 10 ft. (3 m) depth
  • Mount: 1” Weaver or MIL-STD-1913 rail
  • Brightness: 20 daylight settings
  • Power Source: 1 x CR123 battery
  • Battery Life: 1,000 continuous hours at nominal setting 12 at room temperature
  • Country of Origin: Made in USA
Select options This product has multiple variants. The options may be chosen on the product page
-4%
Add to compare

Open Box American Defense Aimpoint Micro Mount 1.42″ – Standard Lever

Out of stock

Original price was: $101.00.Current price is: $96.50.

The Aimpoint Micro Mount s a one-piece unit that places the optic in a true absolute co-witness height.

  • Precision machined from 6061 T6 Aluminum
  • Hard coat anodized for a lifetime of performance
  • Fully adjustable to fit both in spec and out of spec rail systems
  • American Defense MFG, LLC. products feature a lifetime warranty
  • Made with pride in the U.S.A.
Select options This product has multiple variants. The options may be chosen on the product page
-12%
Add to compare

Open Box EOTech Model G33 Magnifier 3x

Out of stock

Original price was: $639.00.Current price is: $559.99.

The new G33.STS magnifier by EOTech Inc is shorter and lighter than previous models. The improved mount provides faster transitioning from 3X to 1X. The G33 offers tool free azimuth adjustment, a larger field-of-view and an adjustable diopter for improved, precise focusing.

  • Compatible with all EOTech Holographic Weapon Sights
  • Length/Width/Height: 3.9” x 2.2” x 3.3” (99 x 55.9 x 83.9 mm)
  • Weight: 11.2 oz (317.5 g)
  • Water Resistant: Submersible to 33 ft (10 m) depth
  • Mount: MIL-STD-1913 rail, 1″ Weaver
  • Fixed Magnification: 3X
  • Eye Relief: 2.2” (55.8 mm)
  • Field of View: 7.3°
  • Sealing: Fog resistant internal optics
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Scalarworks PEAK/02 Folding Iron Sights Set – 1.93″ Height

Out of stock

$298.00

The PEAK/02 is the world’s finest folding iron sights. Designed for discerning shooters who demand the most compact, lightweight, and easiest-to-use folding iron sights.

  • Materials: 7075-T6 Aluminum / 4140H Steel / 17-4 Stainless
  • Finishes: Type III Anodizing / Flash Nitride
  • Center height over rail: 1.75″ (lower-third co-witness with 1.93″ optics)
  • Adjustments: 0.5MOA/Click @ 15″ sight radius
  • Adjustment range: 46MOA windage @ 15″ sight radius
  • Sight post: 0.053″ wide / non-rotating
  • Flip apertures: 0.07″ + 0.20″ diameters / Same-plane
  • Weight: 27g (front) / 42g (rear)
  • Origin: United States of America
View product
-10%
Add to compare

Surefire M640DF Scout Pro Weapon Light – Turbo

Out of stock

$368.99 – $395.00

The M640DFT-PRO Turbo Scout Light Pro combines the best attributes of the standard M640 Scout Light Pro with high-candela performance and dual-fuel capability, and it delivers the farthest-reaching beam and longest runtime of any SureFire long-gun WeaponLight.

  • Candela: 100,000 candela w/ SF18650B; 90,000 candela w/ two 123 lithium
  • Lumens: 700 lumens w/ SF18650B; 600 lumens w/ two 123 lithium
  • Runtime: 2.75 hours w/ SF18650B; 1 hour w/ two 123 lithium
  • Battery: One SF18650B rechargeable (incl.) or two 123A lithium
  • Switching: Click tailcap
  • Length: 5.9 in (15 cm)
  • Distance: 632 meters w/ SF18650B; 600 meters w/ two 123 lithium
  • Construction: Aluminum
  • Finish: Mil-Spec Hard Anodized
  • Weight with Batteries: 5.5 oz (156 g)
  • Bezel Diameter: 1.258 in (3.19 cm)
  • Liquid Ingress Protection: IPX7
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Open Box Daniel Defense A1.5 Fixed Rear Sight – Picatinny

Out of stock

$96.59

The lightweight, streamlined design of the Daniel Defense A1.5 Fixed Rear Sight makes it the optimum back up iron sight for shooters using today’s most popular reflex optics. Its well thought out design does not impede the use of the charging handle on M4 type rifles. The one piece design makes it easy to install to any Military Specification flattop upper receiver and the sight is secured to the upper using a slotted fastener which is threaded into a self-locking steel thread insert.

  • Made in the USA
  • Weight: 1.7 oz
  • Machined from 6061-T6 aluminum
  • Military specification hard anodized
  • Lightweight and Durable
Select options This product has multiple variants. The options may be chosen on the product page
-15%
Add to compare

Open Box Unity Tactical FUSION Micro Hub 2.0

Out of stock

Original price was: $76.00.Current price is: $64.88.

Originally developed with Kyle Lamb for Viking Tactics, the Micro Hub was a smaller, streamlined version of our original FUSION hub. Now even further refined, the Micro Hub 2.0 adds even more versatility and deeper integration with light and laser systems.

Micro Hub 2.0 Updates:

  • Recoil lug
  • Improved integration with the BE Meyers MAWL
  • Direct mounting of Steiner Lasers on top surface
  •  Improved integration w/LightWing & PEQ-15/a Lasers
Select options This product has multiple variants. The options may be chosen on the product page
-7%
Add to compare

Open Box Geissele Super Precision Scope Mount – 34mm Extended – Standard Height

Out of stock

Original price was: $350.00.Current price is: $325.24.

The AR-15/M4 Super Precision series of scope mounts are optimized for use with an AR-15/M4 upper.

  • Mounting surface spans 7 picatinny sections and utilizes 4 shear lugs
  • Mounts use Geissele’s update of the classic nut and bolt method for clamping the mount to the picatinny rail
  • Each nut and bolt combination provides 1,400 pounds of clamping force, much more than any lever mounting arrangement
  • Extended 34mm Model
  • Height: Standard (1.54″)
Select options This product has multiple variants. The options may be chosen on the product page
-8%
Add to compare

Open Box EOTech XPS2 Holographic Weapon Sight – Red Dot

Out of stock

Original price was: $609.00.Current price is: $561.21.

The XPS2 is the shortest, smallest, and lightest EOTech holographic weapon sight available. Its size and weight offer convenience for shooters and law enforcement officers. It runs on a single CR123 battery. This compact, single-lithium-battery configuration leaves more rail space for rear iron sights or magnifiers. If you’re looking for all these features with the advantage of night vision, check out the XPS3.

  • Night Vision Compatibility: None
  • LxWxH: 3.8” x 2.1” x 2.5” (97 x 54 x 64 mm)
  • Weight: 9.0 oz (255 g)
  • Water-Resistant: 10 ft. (3 m) depth
  • Mount: 1” Weaver or MIL-STD-1913 rail
  • Brightness: 20 daylight settings
  • Power Source: 1 x CR123 battery
  • Battery Life: 1,000 continuous hours at nominal setting 12 at room temperature
  • Country of Origin: Made in USA
Select options This product has multiple variants. The options may be chosen on the product page
-14%
Add to compare

Open Box Aimpoint CompM5b – 2.0 MOA Red Dot Sight – LRP Mount w/ 39mm Spacer

Out of stock

Original price was: $1,203.00.Current price is: $1,032.07.

The CompM5b™ is a high performance compact red dot sight that allows for ballistic compensation as well as wind or lead compensation adjustment.

  • 2 MOA dot size
  • 50,000 hours (over 5 years) of constant operation
  • 4 night vision compatible settings and 6 daylight settings
  • Weight 191 g (6.7 oz) sight only
  • Submersible to 45 meters (150 feet)
  • Height of Optical Axis 39 mm (1.5 in) measured from top surface of mechanical interface
  • Advanced optical lenses for enhanced light transmission and ultimate dot clarity
  • Includes: LRP Mount, Spacer, Flip-Up Lens Covers, 4 pcs Fixed Turrets, Custom Turret, Wind Turret, AAA Battery, Aimpoint® Tool, and Drill Tool
Select options This product has multiple variants. The options may be chosen on the product page
-21%
Add to compare

Open Box BCM Gunfighter Short Vertical ForeGrip VG-S Picatinny

Out of stock

Original price was: $45.00.Current price is: $35.60.
  • Low-profile length for increased mobility and decreased “snag” factor.
  • The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
  • Can be mounted in reverse angle to increase control when grabbing handguard and grip
  • Flat sides give better yaw control to the shooter during firing and non-firing manipulations.
  • Aggressive texture and storage volume combined with modular design to allow improvements and adaptation in the future.
  • Cross bolt designed to work with improvised tools (such as a quarter) and allow for easy adjustment or re-tightening.
  • Reversible clamps allow user to set up fasteners to reside on either side.
  • Spring-loaded clamps makes installation and removal easier.
  • Made in the U.S.A., and manufactured from high quality, impact resistant polymers.

*Test fit to ensure proper function (may display attributes consistent with this QC process)

Select options This product has multiple variants. The options may be chosen on the product page
-6%
Add to compare

Open Box True North Concepts GripStop – Picatinny Rail

Out of stock

Original price was: $60.00.Current price is: $56.34.

The Picatinny Rail GripStop is back, and better than ever! This lightweight, (1.7 ounce) 6061 aluminum version of the legacy Gripstop is specifically designed for our Servicemen, and all common U.S. military issued small arms utilizing a 1913 Picatinny rail forearm.

  • Rugged 6061 Aluminum
  • Lightweight (1.7 ounces)
  • Milspec anodized
  • Corrosion resistant Black Nitride hardware
  • Flat-tip screw head for mounting with a common screwdriver or multitool, no more hunting for an Allen wrench at the Armory!
  • Works on all U.S. Issued firearms utilizing 1913 Picatinny rail.

Note: Shades of FDE (Earth Brown) may vary due to the chemical process during the Type 3 Hardcoat.

Select options This product has multiple variants. The options may be chosen on the product page
-6%
Add to compare

Open Box Arisaka Defense Low Profile Finger Stop – Picatinny

Out of stock

Original price was: $25.00.Current price is: $23.41.

The Arisaka Finger Stop was developed as a low profile, minimal control accessory. This version is for 1913 Picatinny rails. It has a slim profile which is ergonomically designed to be located between your index and middle fingers. This typically places it further forward on the handguard, which means it doesn’t get in the way when transitioning to kneeling or prone shooting positions, where most people move their support hand towards the rear.

  • Height: 0.75” above 1913 Picatinny rail
  • Width: 0.68″
  • Weight: 0.4 oz
  • CNC machined from 6061-T6 aluminum
  • MIL-A-8625 Type III hard coat anodized
  • Requires a 3/32″ Allen wrench for installation (not included)
  • Made in the USA.
Select options This product has multiple variants. The options may be chosen on the product page
-23%
Add to compare

Open Box Arisaka Defense Picatinny Handstop

Out of stock

$26.89 – $30.73

The Patent Pending Arisaka Hand Stop is a continuation of the low profile, minimal control accessories. The primary goal of this accessory is to aid the user in pulling their rifle into their shoulder, enhancing control and recoil mitigation.

  • Height: 1.3″
  • Width: 1.19″ at Picatinny clamp, 0.625″ at main interface where your hand or fingers contact.
  • Length: 1.1″
  • Weight: 0.84 oz
  • Material: 6061-T6 aluminum
  • Finish: Black MIL-A-8625 Type III hard coat anodized
  • Compatibility: 1913 Picatinny Rails
  • Made in the USA
Select options This product has multiple variants. The options may be chosen on the product page
-17%
Add to compare

Open Box IWC Haley Strategic Thorntail Scout Light Offset Mount

Out of stock

Original price was: $50.00.Current price is: $41.71.

The THORNTAIL Adaptive Light Mount – Scout Light Mount is designed to accept Surefire M300/M600 Scout, Streamlight Rail Mount 1/2 & HL-X Weaponlights, and Backbone Replacement M300/M600 Scout Bodies and other Replacement M300/M600 Scout Bodies.

  • Will attach to any 1913 Picatinny rail.
  • Fully ambidextrous and provides 8 different mounting solutions.
  • The cantilevered mounting design eliminates shadows in critical low or no light situations.
  • Material: CNC machined from BILLET 6061-T6 aluminum.
  • Finish: Black Anodized TYPE III to MIL-A-8625F.
  • Manufacturer lifetime warranty.
  • Made by Americans in the USA.
Select options This product has multiple variants. The options may be chosen on the product page
-21%
Add to compare

Open Box American Defense Trijicon RMR Mount 1.42″ – Titanium Lever

In stock

Original price was: $97.99.Current price is: $77.37.

The AD-RMR-CO-STD-TL mount was designed for the Trijicon RMR and places the optic in a absolute co-witness height.

  • Precision CNC machined from a block of 6061 T6 aluminum
  • Finished in hard coat type 3 Mil-Spec anodize
  • Fully adjustable to fit both in spec and out of spec rail systems
  • American Defense MFG, LLC. products feature a lifetime warranty
  • Features the all-new Titanium QD Auto Lock™ Lever system
  • Made with pride in the U.S.A.
Select options This product has multiple variants. The options may be chosen on the product page
-19%
Add to compare

Open Box American Defense Trijicon MRO Mount 1.57″ – Titanium Lever

In stock

Original price was: $137.82.Current price is: $112.20.

The AD-MRO-11-STD-TL mount is designed for the Trijicon MRO and places the optic in a Lower 1/3rd co-witness height.

  • Precision CNC machined from a block of 6061 T6 aluminum
  • Finished in hard coat type 3 Mil-Spec anodize
  • Fully adjustable to fit both in spec and out of spec rail systems
  • American Defense MFG, LLC. products feature a lifetime warranty
  • Features the all-new Titanium QD Auto Lock™ Lever system
  • Made with pride in the U.S.A.
Select options This product has multiple variants. The options may be chosen on the product page
-28%
Add to compare

Open Box American Defense Aimpoint Micro Mount 1.57″ – Titanium Lever

Out of stock

Original price was: $137.82.Current price is: $98.73.

The Aimpoint T1/T2/H1 Micro Mount 1 Piece is a one piece unit that places the optic in a Lower 1⁄3rd Co-Witness height.

  • Precision machined from 6061 T6 Aluminum
  • Hard coat anodized for a lifetime of performance
  • Fully adjustable to fit both in spec and out of spec rail systems
  • American Defense MFG, LLC. products feature a lifetime warranty
  • Features the all-new Titanium QD Auto Lock™ Lever system
  • Made with pride in the U.S.A.
Select options This product has multiple variants. The options may be chosen on the product page
-4%
Add to compare

Open Box American Defense Aimpoint Micro Mount 1.42″ – Titanium Lever

Out of stock

Original price was: $116.99.Current price is: $112.20.

The Aimpoint Micro Mount is a one-piece unit that places the optic in a true absolute co-witness height.

  • Precision machined from 6061 T6 Aluminum
  • Hard coat anodized for a lifetime of performance
  • Fully adjustable to fit both in spec and out of spec rail systems
  • American Defense MFG, LLC. products feature a lifetime warranty
  • Made with pride in the U.S.A.
Select options This product has multiple variants. The options may be chosen on the product page
-18%
Add to compare

Open Box Arisaka Defense Offset Picatinny Mount – M-LOK

Out of stock

Original price was: $60.00.Current price is: $49.02.

The Patent Pending Arisaka Offset Picatinny Mount is a combination of our Offset Scount Mount and Picatinny adapter, and is meant for use with Picatinny based lights like the Surefire X300 or Inforce WML, plus other rail mounted accessories.

  • Length: 1.77″
  • Height: 0.20″ (at Surefire Scout Light mounting point)
  • Weight: 1.0 oz
  • The mount is CNC machined from 6061-T6 aluminum and MIL-A-8625 Type III hard coat anodized
  • Requires a 5/64″ Allen wrench for installation (not included).
  • Made in the USA
Select options This product has multiple variants. The options may be chosen on the product page
-50%
Add to compare

Open Box Arisaka Defense Offset Optic Mount (Base Only)

Out of stock

$52.68 – $78.29

The Patent Pending Arisaka Offset Optic Mount is a modular mounting solution that allows the user to select a 35 or 45 degree offset position for a red dot sight without requiring additional components. The 35-degree position brings the red dot sight up closer to slimmer, smaller scopes, while the 45-degree position provides additional clearance around wider turrets or larger, higher magnification scopes.

  • Designed to be attached to the top Picatinny rail of an AR15 rifle.
  • When the rifle is canted to make use of the offset red dot sight, the optic remains centered over the bore and maintains a lower 1/3 co-witness height.
  • The base and optic plates can be reversed, allowing for use on the left or right side.
Select options This product has multiple variants. The options may be chosen on the product page
-15%
Add to compare

Open Box Arisaka Defense Side Scout Mount Picatinny (SSM-P)

Out of stock

$33.11 – $38.05

The Arisaka Side Scout Mount (SSM) is designed for use with Surefire Scout Lights, the Arisaka 300 and 600 Series, and the Streamlight Protac Rail Mount lights. It replaces the stock Picatinny rail adapter with a low profile mount that tucks the light underneath either side of the ATPIAL laser/illuminator series, including the ATPIAL-C, AN/PEQ15, and LA-5/PEQ. It will also allow the light to clear the QD lever on the Steiner DBAL I2, A3, and D2.

Light Compatibility:

  • Surefire M300A. M300B, M300C, M600B, M600C, M600P, M600U, M600V, M600DF,
  • Streamlight Protac Rail Mount 1, 2 and HL-X
  • Arisaka 300 and 600 Series.
Select options This product has multiple variants. The options may be chosen on the product page
-5%
Add to compare

Open Box Cloud Defensive Torrent SBR Picatinny Mount

Out of stock

$50.23 – $52.67

The Cloud Defensive “Torrent series”. Manufactured by Impact Weapons Components in conjunction with Haley Strategic Partners. Strong and versatile light mounts.

  • For use with Cloud Defensive REIN, Modlite PLHv2 and OKW, Surefire M300, M600 Scout (except M600 AA), Streamlight Protac Rail Mount 1, 2, and all replacement M300 and M600 bodies, including backbone and 1913 Picatinny rails.
  • 3 light mounting positions provide .250” of lateral adjustment
  • Cantilevered mounting design shifts light forward of mount, increasing usable rail space.
  • Light offset optimized at a 45 degree offset for ergonomic activation
  • Ambidextrous with 8 total mounting solutions on 4 sided 1913 picatinny rail system
  • Low profile, lightweight and does not impede weapons manipulation
  • Positions the light as close to the firearm as possible
  • Mount does not interfere with the operation of front back-up iron sights
Select options This product has multiple variants. The options may be chosen on the product page
-28%
Add to compare

Open Box Cloud Defensive Light Control System for Streamlight ProTac Switch – LCSMK2

In stock

$50.19 – $64.87

The absolute best mounting solution for tape/pressure switches used to operate the Streamlight HLX ProTac Series Weaponlights. No more rubber bands. No more zip ties or wire or Velcro or duct tape. No more makeshift attachment methods that fail you. No more compromising with the light activation your life depends on.

  • The LCSmk2k features an “Early Exit” feature for the cables. This allows you to run the cable half-way through a given cable channel and then exit the bracket “early” if need more cable slack for a given setup.
  • The LCS Series Locks up 100% to your weapon. Zero movement. Zero play. Virtually indestructible.
  • Low-profile design with heavily radiused/chamfered edges ensure comfort and ergonomic function.
  • Weight with screws: 53 grams (1.9 oz)
  • Length: 3.5″
  • Width: 1.32″
  • Height: .575″ (switch sits .052″ above top edge of rail)
  • 100% MADE IN THE USA
Select options This product has multiple variants. The options may be chosen on the product page
-18%
Add to compare

Open Box Magpul MBUS Pro Sight – Front

Out of stock

Original price was: $84.95.Current price is: $69.56.

The MBUS Pro (Magpul® Back-Up Sight) is a corrosion resistant all-steel back-up sighting solution that delivers maximum functionality and strength with minimum bulk at a price that’s even smaller than its size.

  • All steel construction
  • Steel, rectangular sight post selectable between Match and Standard widths
  • —.040” Match width for increased precision
  • —.060” Standard width for maximum visibility
  • Case hardened and finished with Melonite QPQ™ for extreme resistance to wear and corrosion
  • Mounts on any MIL-STD-1913 Picatinny/STANAG 4694 rail including receiver-height gas blocks
  • Elevation adjustment knob – no tools required
  • Positive detents in both the up and down positions as well as on the elevation knob
  • Standard AR sight height when deployed
Select options This product has multiple variants. The options may be chosen on the product page
-19%
Add to compare

Open Box Magpul MBUS Pro Sight – Rear

Out of stock

Original price was: $104.95.Current price is: $84.74.

The MBUS Pro (Magpul® Back-Up Sight) is a corrosion resistant all-steel back-up sighting solution that delivers maximum functionality and strength with minimum bulk at a price that’s even smaller than its size.

  • All steel construction
  • Steel, rectangular sight post selectable between Match and Standard widths
  • —.040” Match width for increased precision
  • —.060” Standard width for maximum visibility
  • Case hardened and finished with Melonite QPQ™ for extreme resistance to wear and corrosion
  • Mounts on any MIL-STD-1913 Picatinny/STANAG 4694 rail including receiver-height gas blocks
  • Elevation adjustment knob – no tools required
  • Positive detents in both the up and down positions as well as on the elevation knob
  • Standard AR sight height when deployed
Select options This product has multiple variants. The options may be chosen on the product page
-21%
Add to compare

Open Box Magpul MBUS Pro LR Adjustable Sight – Rear

Out of stock

Original price was: $129.95.Current price is: $102.41.

The new MBUS Pro LR capitalizes on the low profile and sleek styling of the original MBUS Pro, while adding the additional feature of an elevation adjustment wheel to accurately engage targets at variable distances. With its all-steel construction, this is the sighting solution that delivers no-tool adjustments, maximum strength, corrosion resistance, and functionality in a compact package. Positive detents keep the MBUS Pro LR at standard AR sight height when deployed and so low when stowed that you will hardly notice them.

  • Position: Rear
  • Height above rail (stowed): ~0.49 in.
  • Length (stowed): 2.2 in.
  • Weight, w/ hardware: 2.0 oz.
  • Mounts on any MIL-STD-1913 Picatinny/STANAG 4694 rail.
  • Small aperture dia.: 0.07 in.
  • Large aperture dia.: 0.19 in.
Select options This product has multiple variants. The options may be chosen on the product page
Load more products
Loading...