Brand
2A Armament2A Armament 1
B5 SystemsB5 Systems 1
Bravo Company USA (BCM)Bravo Company USA (BCM) 1
Daniel DefenseDaniel Defense 1
Ferro ConceptsFerro Concepts 1
Fortis ManufacturingFortis Manufacturing 3
Forward Controls DesignForward Controls Design 3
Impact Weapons ComponentsImpact Weapons Components 1
Lantac USALantac USA 1
LWRC InternationalLWRC International 1
MagpulMagpul 2
Primary Weapons SystemsPrimary Weapons Systems 2
Radian WeaponsRadian Weapons 1
San Tan TacticalSan Tan Tactical 1
VLTORVLTOR 1
Endplates
Daniel Defense Receiver Endplate w/ QD Swivel
Out of stock
$58.00The Daniel Defense Rear Receiver QD Attachment Point allows for ambidextrous attachment of the popular push-button sling swivel.
- Steel Construction
- Heavy Phosphate Coated
- Weight: 0.8 oz.
- Made in the USA
- Installation requires the removal and re-installation of your existing collapsible stock and buffer tube.
- A spanner wrench is the only tool necessary to perform this task.
LWRC Ambidextrous QD Sling Mount End Plate
Out of stock
$74.54The unique design features ambidextrous quick detach sling mounts and two set screws on the bottom of the unit.
- Made in the USA
- Fits AR-15 buffer tube
- Includes one Daniel Defense quick disconnect swivel.
- Ensures consistent alignment
- Eliminates the need to re-stake the castle nut.
Ferro Concepts AR End Plate QD Sling Mount
Out of stock
$22.25Our AR buffer tube end plate sling mount for QD Swivels swaps out the stock AR buffer tube endplate. It is perfect for use with our Single Point Slingster on any AR pistol or customized 2 point setup.
- Made from high-quality materials.
- Quick detach slot.
- Made for the AR platform.
- Made in the USA.
Magpul ASAP Ambidextrous Sling Attachment Point End Plate
Out of stock
$32.25The ASAP allows a range of motion greater than 180 degrees and enables true ambidextrous weapon manipulation.
- Replaces the standard AR15/M4 carbine stock receiver endplate.
- Minimizing sling snagging.
- Works with one-point type slings.
- Made from precision cast black manganese phosphatized steel.
- Made in the USA.
Forward Controls Design ESF End Plate – 3 Sockets
Out of stock
$57.00 – $62.70ESF (End plate, Sling Adapter, Forward Controls Design) is a drop-in end plate replacement for the AR platform (both 223 and 308 specs) featuring 3 QD swivel sockets.
- Machined from 4140 steel.
- Weight: 1.1 oz.
- 3 QD swivel sockets.
- Made in the USA.
Forward Controls Design ESF End Plate – 1 Socket
Out of stock
$42.75 – $48.45ESF-H1 is a drop-in end plate replacement for the AR platform and has a single rear-facing QD swivel socket.
- Machined from 4140 steel.
- 1 QD swivel socket.
- For AR-15/AR-10.
- Socket has no limiters.
- Made in the USA.
Fortis Manufacturing K2 Lightweight Enhanced End Plate and Castle Nut
In stock
$54.10The K2 system utilizes a locking lever design that seats itself through a designed slot on the bottom of the endplate and into corresponding cutouts on the castle nut. This ultra-precision fit allows the castle nut to seat itself into place without the need to stake the endplate. No set screws, no backing out, and no failures. All of these features at only .53 oz / 15 grams!
Features:
- Lightweight design at only .53 oz / 15 grams total
- Castle nut and endplate are 7075 T6 Aircraft Grade Aluminum
- Quick Detach Socket – 360º rotational locking interface
- No set screws or ratcheting systems that can’t be reused
- Made in the USA
Forward Controls Design CNF Castle Nut
In stock
$19.00 – $24.70The TDP spec castle nut is a simple and robust fastener that is almost perfect for the job it’s tasked to perform. Over the years, FCD has consistently come up with two minor gripes, first is its staking notches seem rather shallow and short, second is many don’t enjoy using the castle nut’s wrench notches as serrations (fingers invariably find their way to these sharp cutouts) to rotate it towards to the endplate while installing it.
- Staking notches angle changed from 45 to 30 degrees, this results in longer (25% longer than TDP spec) and deeper notches than found on TDP castle nuts.
- Number of staking notches increased from 3 to 4, spaced equally on the CNF. The castle nut is to be staked in two places, we’re not advocating staking in more than two places, CNF’s 4 staking notches mean that, at all times, 3 will be visible and available for staking, it simply gives the user more staking location options.
- Coarse serrations on the wrench side of the nut, a single-use feature to make it easier while rotating the CNF towards the endplate.
Fortis Manufacturing QD End Plate
Out of stock
$20.73Fortis QD End Plate features a quick-detach swivel socket. This AR15 lower receiver end plate is designed for carbine style buffer tubes for the AR15 & 308 platforms.
- Fully radiused edges, inside and out to prevent fraying of your sling
- 6061 Aluminum – Black Milspec Anodize
- Quick Detach Socket
- 1 1⁄4 Sling Loop
- Made in the USA
Bravo Company BCM Mil-Spec Carbine Stock Hardware Mounting Kit
In stock
$63.91This kit contains all the necessary parts to mount your Mil-Spec dimension stock assembly to your lower receiver:
- Receiver Extension – Mil-Spec, 6 position (machined from 7075T6)
- Receiver End Plate
- Lock Nut (Castle) M4
- Carbine Action Spring
- Carbine Buffer Assembly (options for Std, H, H2, or H3)
- This kit is compatible with the plastic stocks from; BCM®, VLTOR, LMT, Magpul® CTR-M, Stag Arms, Colt
2A Armament Builder Series Buffer Tube Assembly for AR-15
Out of stock
$86.45The Builder Series AR15 Buffer Tube Assembly is manufactured in-house and finished with hard anodize for lasting performance. It is billet machined from 6061-T651 aluminum for tighter concentricity than a forging or impact extrusion to reduce the potential for bolt carrier binding. The assembly includes a 2A Latch Plate as well as a 2A Castle Nut.
- 5 position adjustment. 1 Fully Collapsed. 4 other positions.
- Mil-Spec extension diameter of 1.148, and thread diameter of 1.185
- Carbine length
- Vented
- Self aligns with the buffer detent.
- Weight Buffer Tube Only- 3.6 oz
- Weight Assembly-4.3 Oz
Lantac USA RPS Ratchet Plate System – Castle Nut & Endplate
Out of stock
$59.60The LANTAC RPS™ Ratchet Plate System removes the necessity to stake castle nuts in place after fitting. It also provides a QD Sling attachment point directly below the buffer tube. It utilizes a one-piece designed ratcheted tooth and arm, machined directly into the anti-rotation plate itself. The enhanced castle nut has an aggressive grip pattern and radially machined grooves that register with the spring-like arm and tooth on the plate, causing the nut to be retained in place. The nut cannot vibrate loose through firing but can be removed through the use of an armorers wrench if necessary. The teeth and grooves are all internally facing so they cannot be accidentally damaged.
- Mil-Spec QD Sling Point
- CNC Machined single pass threads.
- Simple one-piece ratchet locking plate.
- Protected engagement surfaces that cannot be accidentally damaged when installed.
- Aggressive Castle Nut grip pattern.
- Precision machined from 4140 Steel and QPQ Nitride finished.
- Made in the USA.
Fortis Manufacturing K1 Lightweight Enhanced End Plate and Castle Nut – Black
In stock
$44.60When designing the Lightweight Enhanced (LE™) Castle Nut & End Plate System, Fortis came up with two systems that virtually eliminate the risk of your castle nut ever backing out.
- Lightweight design at only .55 oz / 16.8 grams total
- Castle nut and endplate are 7075 T6 Aircraft Grade Aluminum
- Quick Detach Socket – 360º rotational locking interface
- No set screws or ratcheting system
- Made in the USA
San Tan Tactical AR-15 Carbine Buffer Tube Kit – MilSpec – QD Endplate
Out of stock
$62.31The STT AR15 Enhanced Buffer Tube Kit is Compatible with Mil-Spec AR15 stocks. This kit contains all the necessary parts to mount a stock assembly onto your lower receiver.
- 6 Position Mil-Spec Carbine Buffer Tube
- Standard Carbine Recoil Buffer 3oz
- High-Quality Recoil Spring
- Castle Nut/Lock Ring
- QD Receiver End Plate
- Nitride Coated Hardware
- 7075 T6 Grade Aluminum
- OTB Drainage Holes
- ASTM Certified US Material
- Made in the USA
Magpul ASAP QD Ambidextrous Sling Attachment Point
Out of stock
$28.45The ASAP QD (Ambidextrous Sling Attachment Point QD) allows a wide range of motion, enabling true ambidextrous weapon manipulation for both left and right-handed shooters. Replacing the standard AR15/M4 carbine stock receiver end plate, the ASAP QD provides a tactical advantage by minimizing sling snagging and facilitating easy transition to and from weapon and reaction side shoulders. The ASAP QD works with one-point type slings with push-button quick disconnect sling swivels such as the MS4 GEN 2.
- Made from precision cast black Melonite™ finished steel and compatible with both Mil-Spec and Commercial-Spec carbine receiver extensions.
- Made in the USA.
- Allows a wide range of motion
- Durable steel construction. Case hardened and finished with Melonite for extreme resistance to wear and corrosion
- Work with Mil-Spec and Comm-spec carbine receiver extensions
- Adjust to your needs
- Accepts any push-button QD sling swivels as well as Magpul QDM
NOTE: The ASAP QD is NOT compatible with A1/A2 fixed stocks as well as any other similarly mounted stock such as the Magpul PRS®, UBR®, and MOE® Rifle Stocks.
Primary Weapons Systems Enhanced Buffer Tube w/ Ratchet Lock Castlenut and Endplate
In stock
$106.72Enhanced Buffer Tube, Racket Lock Castlenut and Endplate assembly by PWS
- Weight- 4.3 oz.
- Mil-Spec tube diameter
- Impact Extruded 7075 Aluminum
- Extended Carrier Support Lip For Smoother Cycling 6 Positions for Stock
- Lightening Cuts Reducing Weight By Approx. 1 Oz. Off Mil-Spec
- Unique Fluted Tube Design For Debris Clearing
- Engraved Position Numbers
- Enlarged Drain Holes
- MIL-A-8625 F, Type III, Class 2 Anodized
- Includes PWS Ratchet Lock Castle Nut & End Plate Set
Impact Weapons Components QD End Plate for AR-15/M4
Out of stock
$18.95The QD End Plate by Impact Weapons Components is a rotation limited QS Sling Swivel Socket for the AR15/M4 platform. Features a durable black melonite plating which assures a perfect, deep rich black color to match your receiver and other IWC components.
- Rotation Limited to prevent QD Sling Swivel rotation & sling wrap-up.
- Precision CNC Machined from a single piece of Billet Steel. NO ROUGH, Laser-cut Edges that look like a beaver chewed them out to snag your gear!
- Single-piece construction guarantees no parts to work loose or gaps to rust & corrode.
- Steel Construction allows for proper staking to MIL-Spec
- Proudly Made In USA by Americans at Impact Weapons Components, LLC.