Brand
Aero PrecisionAero Precision 1
Bravo Company USA (BCM)Bravo Company USA (BCM) 1
CMC TriggersCMC Triggers 5
CMMGCMMG 1
Geissele AutomaticsGeissele Automatics 16
Lantac USALantac USA 2
Patriot Ordnance FactoryPatriot Ordnance Factory 2
Q - Live Q or DieQ - Live Q or Die 1
Radian WeaponsRadian Weapons 2
SIG SauerSIG Sauer 1
Sons of Liberty Gun WorksSons of Liberty Gun Works 1
Timney TriggersTimney Triggers 7
Rifle Triggers
Geissele Hi-Speed National Match Trigger
In stock
$284.00The Geissele Hi-Speed National Match adjustable triggers are specially designed for competition, hunting, and duty use, where both accuracy and robustness are critical. The shooter can tune the High-Speed National Match to their preferences, including first and second-stage pull weight, over-travel, and sear engagement.
The Service Rifle, Designated Marksman Rifle, and Match Rifle Spring sets are all included.
- Made for AR10/AR15
- 2 Stage Adjustable
- Curved Trigger Bow
- Service Rifle: 1st Stage: 3.2 – 5 lbs, 2nd Stage: 0.5 – 1.5 lbs
- DMR: 1st Stage: 2.5 – 3.6 lbs, 2nd Stage: 0.5 – 1.5 lbs
- Match Rifle: 1st Stage: 1.5 – 2.5 lbs, 2nd Stage: 6.0 – 14 oz
- Pin Size: Milspec
Geissele Super MCX SSA – Curved Bow Trigger
Out of stock
$325.00The Super MCX SSA was designed as a high performance, combat inspired two stage trigger. Derived from our CRANE Safety Certified M4 carbine trigger, the Super Semi-Automatic (SSA), the Super MCX delivers all of the same performance, reliability, safety and forgiveness features that the SSA possesses. The Super MCX is an approx. 4.5lb., non-adjustable, two stage trigger that provides the shooter with precise and accurate trigger control.
- Platform: SIG MCX
- Type: 2 Stage
- 1st Stage Weight Range: 2.75 – 3 lbs.
- 2nd Stage Weight Range: 1.5 – 1.75 lbs.
- Total Pull Weight Range: 4.25 – 4.5 lbs.
- Adjustable: No
- Trigger Bow Type: M4 Curved
- Pin Size: Mil-Spec
Timney Triggers Competition Trigger for AR-15 – Curved, Skeletonized
In stock
$304.99The self-contained module is ready to install in your small-pin AR and delivers an exceptionally smooth, crisp, creep-free single-stage trigger pull that feels more like a traditional bolt action than a combat rifle trigger.
- Model: Skeletonized Trigger.
- 100% drop-in—no gunsmithing, fitting, or adjusting required.
- All components are captive in the lightweight, aluminum alloy housing.
- Hammer is wire-EDM machined from S7 tool steel.
- Other components are EDM cut from A2 tool steel, then heat-treated to Rc 56-60 for long service life.
- Precision-ground engagement surfaces ensure superb reliability and a crisp, clean hammer release.
- Installs using your rifle’s original hammer/trigger pins; proprietary design eliminates pin walkout
Timney Triggers Targa 2-Stage Short Trigger for AR-15 – Curved
In stock
$241.99This Timney set the standard for aftermarket trigger upgrades for the AR/M4 rifle.
- Trigger allows you to become more accurate with your rifle.
- No gunsmith needed, easy to install.
- Ready for the range, no adjustments needed.
- No additional parts are needed to install the trigger.
- Trigger shoe options to fit your feel/style.
- Pin Size: Small Pin.
Timney Triggers Targa 2-Stage Short Trigger for AR-15 – Straight
In stock
$241.99This Timney set the standard for aftermarket trigger upgrades for the AR/M4 rifle.
- Trigger allows you to become more accurate with your rifle.
- No gunsmith needed, easy to install.
- Ready for the range, no adjustments needed.
- No additional parts are needed to install the trigger.
- Trigger shoe options to fit your feel/style.
- Pin Size: Small Pin.
Timney Triggers Competition Trigger for AR-15 – Curved
In stock
$241.99The self-contained module is ready to install in your small-pin AR and delivers an exceptionally smooth, crisp, creep-free single-stage trigger pull that feels more like a traditional bolt action than a combat rifle trigger.
- 100% drop-in—no gunsmithing, fitting, or adjusting required.
- All components are captive in the lightweight, aluminum alloy housing.
- Hammer is wire-EDM machined from S7 tool steel.
- Other components are EDM cut from A2 tool steel, then heat-treated to Rc 56-60 for long service life.
- Precision-ground engagement surfaces ensure superb reliability and a crisp, clean hammer release.
- Installs using your rifle’s original hammer/trigger pins; proprietary design eliminates pin walkout
Timney Triggers Competition Trigger for AR-15 – Straight
In stock
$241.99The self-contained module is ready to install in your small-pin AR and delivers an exceptionally smooth, crisp, creep-free single-stage trigger pull that feels more like a traditional bolt action than a combat rifle trigger.
- 100% drop-in—no gunsmithing, fitting, or adjusting required.
- All components are captive in the lightweight, aluminum alloy housing.
- Hammer is wire-EDM machined from S7 tool steel.
- Other components are EDM cut from A2 tool steel, then heat-treated to Rc 56-60 for long service life.
- Precision-ground engagement surfaces ensure superb reliability and a crisp, clean hammer release.
- Installs using your rifle’s original hammer/trigger pins; proprietary design eliminates pin walkout.
Timney Triggers Impact Trigger for AR-15 – Curved
In stock
$164.00Introducing the Impact – the next trigger in the People’s Choice Line of Excellence from the craftsmen and women of The World’s Finest Trigger.
- An AR trigger at a lower price without compromising on quality for budget-build AR’s.
- The Impact will give you a crisp, clean, 3-pound break and will drop into all Mil-Spec AR’s.
- Material: All components are captive in the lightweight, aluminum alloy housing.
- Hammer Material: Wire-EDM machined from S7 tool steel.
- Installs using your rifle’s original hammer/trigger pins, our proprietary design eliminates pin walkout.
Geissele Automatics Single Stage Precision (SSP) M4 Curved Bow Trigger
In stock
$245.00The Single-Stage Precision (SSP) is Geissele Automatics’ first true single-stage trigger for the AR Platform.
- Material: S7 Tool Steel.
- Finish: Durable corrosion-resistant black oxide.
- Platform: AR15/AR10.
- Type: Single Stage.
- Total Pull Weight Range: 3 – 3.75 lbs.
- Adjustable: No.
- Trigger Bow Type: M4 Curved.
- Recommended Use: Target & Precision Shooting, Hunting.
- Pin Size: Mil-Spec.
Geissele Automatics Government Super Semi-Automatic (SSA-X) Trigger
Out of stock
$346.49The SSA-X Government trigger is a two-stage trigger that features a Nanocoated wide-body trigger and Nanocoated Hammer, with a special Chrome Nitride disconnect that combines advancements in coating design to bring about the next evolution of the venerable SSA.
- Platform: AR15/AR10.
- Type: 2 Stage.
- 1st Stage Weight Range: 3.75 – 4.25 lbs.
- 2nd Stage Weight Range: 1.5 – 2.0 lbs.
- Total Pull Weight Range: 5.25 – 6.0 lbs.
- Adjustable: No.
- Trigger Bow Type: M4 Curved.
- Recommended Use: Law Enforcement, Home Defense, Hunting.
- Pin Size: Mil-Spec.
Geissele Automatics Super 3 Gun (S3G) Trigger
In stock
$245.00The Geissele Super 3 Gun (S3G) is a semi-automatic, hybrid cross between a single-stage trigger and a traditional 2-stage trigger. Its robust feel and light pull weight, combined with a lightning-quick reset, make this trigger ideal for any 3 Gun competitor. The S3G trigger has a very short, light pull and reset. We do not recommend it for duty use, bench rest, accuracy work or shooting small groups. It is designed for close course competition use where rapid target engagement with quick follow-up shots are required.
- Platform: AR15/AR10
- Total Pull Weight: 3.0 – 4.0 lbs. (Lighter Spring), 4.5 – 5.5 lbs. (Heavier Spring)
- Adjustable: No
- Bow Type: M4 Curved
- Recommended Use: 3 Gun Competition
- Pine Size: Mil-Spec
CMC Triggers Complete Lower Parts Kit w/ Single Stage Curved 3.5lb Trigger
In stock
$224.10CMC Triggers Complete Lower Receiver Parts Kit for AR-15 is a great addition to your AR15 build. From amateur gun builder to seasoned expert gunsmith, this lower parts kit is for you. *NOTE: Fire control group & grip not included.
- Bolt Catch, Bolt Catch Plunger
- Bolt Catch Spring, Bolt Catch Roll Pin
- Mag Release. Mag Release Button, Mag Release Spring
- Buffer Retainer Spring
- Safety
- Buffer Retainer
- Safety Detent Spring, Safety Detent
- Trigger Guard, Trigger Guard Roll Pin
- Take-down Detent Springs, Take-down Detent, Take-down Pins
- CMC 3.5lb Single Stage Trigger Curved
Geissele Automatics 2 Stage Trigger (G2S)
In stock
$170.00The Geissele 2 Stage (G2S) was designed to be a high quality, cost-effective option of the Super Semi-Automatic SSA trigger. The G2S is a non-adjustable combat trigger that is a precision two-stage trigger and allows precise and accurate trigger control. The G2S is manufactured from the same tool steel as the SSA and the sears are also wire EDM cut. Visually, from the outside of the weapon there is no difference from the SSA and the feel and reliability are the same. The G2S however has a different way of holding the hammer pin in place, there is no laser markings, and the parts are only spot checked for MP.
- Platform: AR15/AR10
- Type: 2 Stage
- 1st Stage Weight Range: 2.75 – 3 lbs.
- 2nd Stage Weight Range: 1.5 – 1.75 lbs.
- Total Pull Weight Range: 4.25 – 4.75 lbs.
- Adjustable: No
- Trigger Bow Type: M4 Curved
- Recommended Use: Military, Law Enforcement, Home Defense
- Pin Size: Mil-Spec
Lantac USA E-CT1 Single Stage 3.5lb Trigger – Curved
In stock
Advanced performance meets precision machining and ultra-slick styling in the shape of the new E-CT1™ Single Stage Trigger from LANTAC. The trigger features massive improvements over the original with entirely different sear engagement surfaces that remove creep and deliver a super crisp break. Radically different internal geometry also creates insanely short reset and near non-existent over travel that will greatly decrease split times and give you a big advantage over the competition.
- The Hammer, Trigger & Disconnector are precision machined from S7 tool steel with a proprietary sear manufacturing process that yields an incredibly smooth engagement surface and all parts are then case hardened before Black Oxide finish.
- The CNC machined Aluminum cassette has adjustment set screws built-in that allows the user to set perfect pin tension and the trigger can be installed with standard pins or the threaded screw types seen in previous designs.
- The cassette is Type 3 Hard Coat Anodized Class2 Black and then Laser engraved for identification.
- Comes complete with Trigger Assembly and Pin Set.
- Manufactured and assembled according to strict AS9100 aerospace requirements and quality-assured with the latest technology inspection equipment ECT-1’s are designed for use with AR receivers in 5.56/.223 or 7.62/.308.
- Trigger mechanism manufactured by Timney Triggers.
Lantac USA E-CT1 Single Stage 3.5lb Trigger – Flat
Out of stock
Advanced performance meets precision machining and ultra-slick styling in the shape of the new E-CT1™ Single Stage Trigger from LANTAC. The trigger features massive improvements over the original with entirely different sear engagement surfaces that remove creep and deliver a super crisp break. Radically different internal geometry also creates insanely short reset and near non-existent over travel that will greatly decrease split times and give you a big advantage over the competition.
- The Hammer, Trigger & Disconnector are precision machined from S7 tool steel with a proprietary sear manufacturing process that yields an incredibly smooth engagement surface and all parts are then case hardened before Black Oxide finish.
- The CNC machined Aluminum cassette has adjustment set screws built-in that allows the user to set perfect pin tension and the trigger can be installed with standard pins or the threaded screw types seen in previous designs.
- The cassette is Type 3 Hard Coat Anodized Class2 Black and then Laser engraved for identification.
- Comes complete with Trigger Assembly and Pin Set.
- Manufactured and assembled according to strict AS9100 aerospace requirements and quality-assured with the latest technology inspection equipment ECT-1’s are designed for use with AR receivers in 5.56/.223 or 7.62/.308.
- Trigger mechanism manufactured by Timney Triggers.
Aero Precision Fire Control Group (FCG) Kit
Out of stock
$39.99The Aero Precision FCG kit gets you a mil-spec standard Fire Control Group to quickly add to your AR15 or AR 308 build and get shooting on the range. Includes:
- Trigger/hammer pin
- Trigger spring
- Hammer spring
- Disconnector spring
- Hammer
- Trigger
- Disconnector
CMMG Mil-Spec Trigger Kit for AR-15
Out of stock
$34.78The perfect trigger for your next build. Reliable single-stage design based on the original M16 trigger, modified for semi-auto use. Mil-Spec Trigger Kit includes:
- Hammer Assembly
- Hammer Spring
- Trigger
- Trigger Spring
- Disconnect
- Disconnect Spring
- Hammer and Trigger Pins
