Raidworx RSR (Reddot Storage Riser) Micro Mount

$145.00

Black
Flat Dark Earth (FDE)
SKU: N/A

Product Summary

Designed to place the optic 2.76″ above the top rail, the Riadworx RSR provides a more heads-up, natural shooting position while achieving a ballistically flatter trajectory with the most common load data.

  • Higher than the “standard” 2.26″, the RSR places the optic 2.76″ above top rail (measured with EXPS/T1/T2 line of optics). Roughly 2.26″ height with xps variants.
  • Enhanced ability to passive aim with Night Vision systems.
  • User-friendly for shooting with Gas Mask, SCBA, CBRN systems.
  • Inset T-25 driver bit in battery cap of riser system for emergency tightening or mounting of riser to rifle.
  • Watertight spare battery (CR123A/CR2032) storage compartment inside of riser. (Periodically check your spare battery to ensure it is still in good condition).
  • Material: 7075T6 Aluminum and 4140 Steel with USA-made hardware.
  • Clamping bars on both models are 4140 steel with nitride coating for corrosion protection.
  • All hardware is made in America and is nitride coated.
  • Finish: Type 3 Hard Coat Anodizing.
  • Aimpoint Micro Riser has the ability to use standard iron sights and co witness through the riser body.
  • Aimpoint Micro Riser Weight: .24lbs/3.7oz. (without CR2032 battery in riser).
  • All Raidworx products are backed by our limited lifetime warranty.

Detailed Description

Designed to place the optic 2.76″ above the top rail, the Raidworx RSR provides a more heads-up, natural shooting position while achieving a ballistically flatter trajectory with the most common load data.

  • Higher than the “standard” 2.26″, the RSR places the optic 2.76″ above top rail (measured with T1/T2 line of optics).
  • Enhanced ability to passive aim with Night Vision systems.
  • User-friendly for shooting with Gas Mask, SCBA, CBRN systems.
  • Inset T-25 driver bit in battery cap of riser system for emergency tightening or mounting of riser to rifle.
  • Watertight spare battery (CR2032) storage compartment inside of riser. (Periodically check your spare battery to ensure it is still in good condition).
  • Material: 7075T6 Aluminum and 4140 Steel with USA-made hardware.
  • Clamping bars on both models are 4140 steel with nitride coating for corrosion protection.
  • All hardware is made in America and is nitride coated.
  • Finish: Type 3 Hard Coat Anodizing.
  • Aimpoint Micro Riser has the ability to use standard iron sights and co witness through the riser body.
  • Aimpoint Micro Riser Weight: .24lbs/3.7oz. (without CR2032 battery in riser).
  • All Raidworx products are backed by our limited lifetime warranty.

Specifications

Overview

Brand

Technical Information

Co-Witness

2.76"

Material

4140 Steel, 7075 Aluminum

Finish

Anodized

Mounting Platform

Catalog Location

California Prop 65 Warning

WARNING: This product can expose you to chemicals, which are known to the State of California to cause Cancer and Reproductive Harm. For more information visit www.P65Warnings.ca.gov