Forward Controls Design OPF-G Glock MOS Mounting Plate – DPP

OPF-G, DPP (Optics Platform, Forward Controls, Delta Point Pro) uses the same proven design of the OPF-G, RMR to keep the Delta Point Pro immobile, the simplest and most effective way to prevent sight-to-plate mounting screws from loosening and shearing.

While Leupold’s Delta Point Pro uses 4 recoil lugs (twice as that of the RMR’s) and beefier mounting screws, the challenges of keeping the sight on the plate without loosening or shearing the sight to plate screws are not very different from those of the RMR. OPF-G, DPP has a front and rear fence, the tight tolerances of the plate to slide, and sight to plate ensure minimum movement along the bore in recoil.

OPF-G, DPP ships with 2 plate to slide screws (M3 0.5mm x 6mm), 2 Delta Point Pro screws (M4 .7×15.8mm), a T10, and a T15 wrench. The screws included with the Delta Point Pro are the same screws that ship with the Delta Point Pro, the 2 screws we provide are simply spares. A torque wrench is necessary to properly install both the plate to slide, and sight to plate screws.

Included:

• OPF-G DDP plate
• 2 plate-to-slide screws (M3 0.5mm x 6mm)
• 2 Delta Point Pro screws (M4 .7×15.8mm)
• T10 Torx bit
• T15 Torx bit

Specs:

• Billet machined in 4140.
• Heat treated and black nitride coated.
• Torque Value plate to slide: 13in/lb.
• Torque Value sight to plate: 25in/lb.
• Proudly designed and made in the USA.