Shop
Raven Concealment Systems OWB Perun Holster for Glock 17
In stock
$49.99The Perun is designed to be the best modular OWB “pancake” style holster on the market.
- Body-hugging design that rides high for maximum concealment.
- Each holster includes three pairs of 1.5” belt loops.
- Allows for 0-degree or 10-degree cant.
- Crisp, defined, and consistent retention.
- Compatible with generation 3-5 Glock pistols.
- Not compatible with Gen 5 Glock 40 cal-G22, G23, G27, G35 & G24.
- Ambidextrous configuration for left-handed or right-handed use.
Killer Innovations Glock Magazine Extension
Out of stock
$52.49Killer Innovations Velocity Mag Extensions “Enhanced Grip Feature” cuts will change the way you reload. E.G.F. cuts provide an aggressive serrated lip that give the shooter ultimate grip and angularity control while feeding the mag into the pistol. E.G.F. cuts are located at the bottom-front and sides of the mag extension, so however you prefer to grab your mag for a reload, a perfect grip is always there.
- Material: 6061 T6 Aluminum
- Finish: Anodize
- Dims: 1.5″W x 1.79″L x 1.66″H
- Includes extended spring
- 9mm +5 rounds
- .40 cal +4 rounds
Zev Technologies Glock Magazine Extension – Aluminum
In stock
$47.00 – $48.60This high quality aluminium base pad from Zev Technologies offers an extended round capacity for 17 round Glock magazines.
- Only compatible with 17 round magazines (see list below)
- 3 piece design easy to assemble and disassemble
- Finish: Black Type III Hard Anodize
- Material: Aluminum
- 9mm Magazines: +5 Round Extension
- .40 Cal Magazines: +4 Round Extension
Zev Technologies Glock Magazine Extension – Polymer
Out of stock
$30.38This high quality polymer base pad from Zev Technologies offers an extended round capacity for 17 round Glock magazines.
- Only compatible with 17 round magazines (see list below)
- 3 piece design easy to assemble and disassemble
- Material: Polymer
- 9mm Magazines: +5 Round Extension
- .40 Cal Magazines: +4 Round Extension
Timney Triggers Alpha Competition Trigger for Glock Gen 3/4
In stock
$184.41With a factory pull weight of 3 pounds, the Timney Alpha Competition trigger answers the long call for a trigger that has the same feel and performance that matches the reliability of the Glock system by providing an improved trigger design that does not sacrifice any part of the Glock reliability.
- Three-pound pull weight.
- Crisp trigger break.
- Teflon nickel (NP3) – trigger bar and sear (this process virtually eliminates friction, allowing for an extremely smooth feel).
- Straight aluminum trigger with safety blade (anodized).
- Uses all stock Glock parts and springs.
- Compatible with stock Glock triggers.
Forward Controls Design OPF-G Glock MOS Mounting Plate – DPP
In stock
$68.87OPF-G, DPP (Optics Platform, Forward Controls, Delta Point Pro) uses the same proven design of the OPF-G, RMR to keep the Delta Point Pro immobile, the simplest and most effective way to prevent sight-to-plate mounting screws from loosening and shearing.
- Billet machined in 4140.
- Heat treated and black nitride coated.
- Torque Value plate to slide: 13in/lb.
- Torque Value sight to plate: 25in/lb.
- Proudly designed and made in the USA.
Forward Controls Design OPF-G Glock MOS Mounting Plate – ACRO
Out of stock
$68.87The OPF-G-ACRO is the perfect choice for installing the ACRO on your Glock MOS pistol slide. It is identical to the Tangodown AAM-01. FCD is proud to rebrand the Tangodown optic plate because of its outstanding design.
- Machined in 4140 steel.
- Melonite Coating.
- Proudly designed and made in the USA.
Forward Controls Design Glock MOS Mounting Plate for RMR/SRO
Out of stock
$68.87OPF-G, RMR (Optics Platform, Glock, for RMR) is a Glock MOS Adapter Set 01 and Set 02 compatible plate for mounting Trijicon RMR or SRO on Glock Gen 4 and Gen 5 slides, G17, G19, G34, G35, G41 (width 25mm/1 inch.) and G40 that uses Set 02.
- Sight is to be fully supported in the front and rear by recoil lugs/fences, with minimum movement.
- Eliminate the need to use an additional sealer plate.
- Correct length sight to plate, and plate to slide screws. Screws are to be Torx.
- The adapter plate is to be machined in steel.
- Proudly designed and made in the USA.
ZEV Technologies Upper Parts Kit for Glock (9mm)
Out of stock
$150.10This 9mm parts kit works with a ZEV slide to create a completely functional upper assembly including all internals, an extra firing pin spring and a ZEV backplate. Not Gen-5 compatible. Includes:
- Channel liner
- Striker sleeve
- Spring Cups
- Extractor Rod, Bearing, Spring Assembly
- ZEV Backplate
- ZEV Steel Firing Pin Safety and Spring
- 2 lb striker spring
- 3 lb striker spring
Lantac USA Ti-PIN Titanium Glock Frame Pins for Gen 1-4
Out of stock
$36.79Ti-PIN™ Precision machined titanium pin set for Gen1-4 Pistols.
- Comes with Trigger Pin, Locking Block Pin & x2 Ejector Housing Pins.
- Manufactured in the USA.
Magpul GL Enhanced Magazine Well for Glock 17, Gen 3
Out of stock
$23.70The Magpul GL Enhanced Magazine Well for GLOCK 17 GEN 3 is a high performance, purpose-built Glock frame magazine well. It was designed to enhance and ensure positive magazine insertion in high-stress scenarios. Its sleek and ergonomic design features also provide excellent concealment and ensure minimal printing to the user’s clothing. Ramp and edge geometry allow for the smooth removal of faulty or stuck magazines during reloading or immediate action events.
- Made in the USA
- Reinforced polymer construction
- Easy installation
- Rugged polymer formula holds up to rough handling
- Large ramp area for easier reloading
- External dimensions ensure minimal printing when carrying concealed
- Compatible with Magpul, OEM, and most aftermarket magazine floor plates and magazine extensions.
ZEV Technologies Extended Small Mag Release for 1st-3rd Gen Glock
Out of stock
$39.90The ZEV Technologies Extended Magazine Release for Glock is easy to install, and Machined from Billet Aluminum then Hard Anodized. This magazine release is a must for any Glock owner. ZEV Parts always incorporate design, feel, and performance.
- CNC Aircraft Quality Billet Aluminum
- Black Hard Anodized Mag-release body
- Textured button face
- Black Hard Anodized button.
- Drop-in replacement.
- Made in the USA
- Compatible with 1-3rd Gen Glocks