Battle Arms Development
Battle Arms Development Rigidrail M-LOK Rail – 9.5″
Out of stock
$229.95The Battle Arms Development’s Rigidrail 9.5″ M-LOK Handguard is designed to balance lightweight and strength/rigidity.
- Material: Aircraft Grade 6061-T6 Aluminum.
- Finish: Mil-Spec Type 3 Class 2 Hard-coat Anodized.
- Length: 9.5″.
- Weight: 5.9 oz.
- M-LOK Slots at 3, 6, 9, and partial 12 o’clock positions.
- Barrel Nut Diameter: 1.378″.
- Barrel Nut: 7075 Aluminum Type 3 Class 2 Hard Anodized Clear (Bronze finish).
- No Contact with Gas Tube.
Battle Arms Development AR-15 Magazine Release Kit – MOD 2
Out of stock
$31.81This magazine release is compatible with all lower receivers that accept mil-spec magazine release buttons.
- Precision CNC Machined from Billet 7075-T6 Aluminum
- Lightweight
- Black Phosphate Finish
- Mil-spec replacement part
- Made in the USA
Battle Arms Development Workhorse Free Float Rail – 15″
In stock
$165.00The WORKHORSE® MLOK compatible rail system was designed to be a lightweight and slimline option to be used on MIL-SPEC carbines available on the market today. With MLOK mounting options at the 3.6, and 9 o’clock positions and skeletonized areas where MLOK is not used, this handguard not only offers function but shaves weight where it is not needed. BAD still maintains 1913 MIL-SPEC Picatinny rail at the 12 o’clock position that is “notch cut” to match Battle Arms upper receivers and reduce weight gain. Offered in multiple lengths to accommodate different barrel lengths and different needs, the WORKHORSE® offers everything you need and nothing you don’t.
- Material: 6061 T6 Aluminum
- Length: 15in
- Weight: 8.8oz (No Barrel Nut) 10.5oz with Barrel Nut
- Internal Diameter: 1.36in
- Finish: Type 3 Black Hardcoat Anodize
- Freefloat: Yes
- Attachment Type: MLOK
Battle Arms Development 3-Piece Enhanced Lower Parts Kit
Out of stock
$33.00BAD-LPK-PK3 3 Piece Enhanced Lower Parts Kit Consisting of the following:
- Enhanced Bolt Catch (BAD-EBC-IC), which is a cost-friendly alternative, without sacrificing the quality for your AR build! The AR-15 Cast Enhanced Bolt Catch is 8620 heat treated cast steel with a manganese phosphate black finish.
- Enhanced Single Sided Safety Selector (BAD-E4S-IC) for the AR15 Style Rifles.
- Enhanced Magazine Catch – BAD-EMC-IC
- More information available below
Battle Arms Development Enhanced Pin Set – Titanium
In stock
$24.99Battle Arms Development Enhanced Pin Set (BAD-EPS-Ti) for the AR15 / M16 / M4 style rifles. The set consists of the Enhanced Takedown Pin – Titanium (BAD-ETP-Ti) and Enhanced Pivot Pin – Titanium (BAD-EPP-Ti). Precision CNC machined from Grade 5 Titanium Bars, the BAD-ETP-Ti & BAD-EPP-Ti are in its natural machined titanium finish. 50% lighter than Mil-Spec pin set!
- AR15 / M16 / M4 Compatible – Fits all AR15/M16/M4 lower receivers with mil-spec .250in diameter front pivot and rear takedown pin holes.
- Patent Pending Pivot Pin & takedown Pin Head Designs – Greatly improved gripping surface and pull strength without the use of oversized heads.
- Low Profile Pin Heads – Low drag and never in the way. Lower profile than mil-spec pinheads.
- Ambidextrous Safety Compatible – The Enhanced Takedown Pin – Titanium (BAD-ETP-Ti) head design does not obstruct the use of the right side ambidextrous safety selector lever.
- Extended Pin Tips (+0.030in over mil-spec) – Added tip length noticeably aids in starting/pushing the pins out from the left side of the receiver, without undue protrusion.
- Bullet Tip Guide – Cone shaped recess at both pin tips prevent accidental bullet or tool slip and reduces the chance of scratching/damaging of the receiver.
- Patent Pending EZ Guide Channel – The additional EZ Guide Channel provides easy, assisted installation of the BAD-EPP-Ti (Enhanced Pivot Pin – Titanium). No more lost detents and springs.
- Weight – 0.256 oz (0.128 oz for Takedown Pin and 0.160 oz for Pivot Pin)
- Each BAD-EPS-Ti comes with (1) BAD-ETP-Ti, (1) BAD-EPP-Ti, (2) KNS hardened stainless steel detents and (2) 17-7 nickel plated stainless steel pin springs.
- Proudly designed and manufactured in the U.S.A.
Battle Arms Development Enhanced Pin Set – Steel
Out of stock
$28.45Battle Arms Development Enhanced Pin Set (BAD-EPS) for the AR15 / M16 / M4 style rifles. The set consists of the Enhanced Take-down Pin (BAD-ETP) and Enhanced Pivot Pin (BAD-EPP). Precision Swiss CNC machined from round stock steel bars, the BAD-ETP & BAD-EPP are case hardened and finished in mil-spec black manganese phosphate.
- AR15 / M16 / M4 Compatible – Fits all AR15/M16/M4 lower receivers with mil-spec .250in diameter front pivot and rear take-down pin holes.
- Patent Pending Pivot Pin & Take-down Pin Head Designs – Greatly improved gripping surface and pull strength without the use of oversize heads.
- Low Profile Pin Heads – Low drag and never in the way. Lower profile than mil-spec pin heads.
- Ambidextrous Safety Compatible – The Enhanced Take down Pin (BAD-ETP) head design does not obstruct the use of the right side ambidextrous safety selector lever.
- Extended Pin Tips (+0.030in over mil-spec) – Added tip length noticeably aids in starting/pushing the pins out from the left side of the receiver, without undue protrusion.
- Bullet Tip Guide – Cone shaped recess at both pin tips prevent accidental bullet or tool slip and reduced the chance of scratching/damaging of the receiver.
- Patent Pending EZ Guide Channel & Magnetic Assist Install – Easy, hassle free magnet assisted installation of the EPP (Enhanced Pivot Pin). No more lost detents and springs.
- Weight: .49oz
Battle Arms Development Reversible Ambidextrous Safety Selector
Out of stock
$43.32The best just got better! From the inventors of the very first fully modular, patented, ambidextrous safety selector for the AR-15 platform, Battle Arms Development is raising the bar on reliability and compatibility while lowering the price with the new generation BAD-ASS-PRO!
- Modular Assembly
- Ambidextrous Controls
- Reversible 0°- 60° or 0°- 90° Option
- Ergonomic Lever Design for Positive Purchase
- Limited Lifetime Warranty Against Manufacturing Defects
- Dovetail Attachment Engineered for Ultimate Strength and Reliability
- Patent Pending Internal Locking Mechanism Eliminates Broken Screws
- Swiss CNC Machined Center for Ultimate Precision and Butter Smooth Operation
- Compatible with All Known AR Variant Triggers(1) (i.e. Hiperfire, Geissele, CMC, Timney, etc.)
- Compatible with All Known AR Variant Lower Receivers with or w/o Short-Throw Relief Cut and Markings(2)