Geissele Automatics

Add to compare

Geissele Automatics Barrel Nut Wrench

Out of stock

$13.82
  • The Geissele Barren Nut Wrench is designed to be used with Geissele Barrel Nuts, for easy installation of Geissele rail systems including the Super Modular Rail system. See our selection of Geissele rails here.
View product
Add to compare

Geissele Automatics Tungsten Buffer Weight

Out of stock

$24.48 – $63.54

The Geissele Automatic’s Tungsten Buffer Weight is a great tool to convert your H1 buffer into a H2 or H3. To change the H1 Buffer assembly into the heavier H2 or H3 you will need to disassemble the buffer and replace the steel weights with the tungsten weights. This increases buffer weight by one category (H0 to H1/H1 to H2) and allows the shooter to fine tune the buffer to their preferred configuration.

  • Material: Tungsten
  • Platform: AR-15, M4, M16
  • Compatibility: Mil-Spec Buffer Tubes
  • Drop-in replacement for stainless steel weights
  • Increases buffer weight by one category (H0 to H1/H1 to H2)
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Geissele Automatics Premium Milspec Buffer Tube 7075

Out of stock

$65.00 – $75.00

The Geissele Premium Mil-Spec Buffer Tube is a rigid and durable buffer tube that conforms to all mil-spec standards.

  • Machined from quality 7075-T6 Aluminum.
  • Finished in Type 3 Hardcoat Anodize.
  • Features 6 stock positions.
  • Weight: 3.7oz.
  • Castle nut and end plate included.
  • Made in the USA.
Select options This product has multiple variants. The options may be chosen on the product page
-48%
Add to compare

Geissele Super Precision – MRO Series Optic Mounts

In stock

$69.98 – $155.00
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Geissele Automatics Super 42 Braided Wire Buffer Spring and Buffer Combo

Out of stock

$80.63 – $111.83

The Geissele Super 42 Spring was designed to improve the function and reliability of your AR-15 pattern rifle. Its unique spring design uses three independent strands of wire, just like the German MG42 Machine Gun. This concept acts as a harmonic damper and energy absorber by allowing the springs to flex separately from each other. This flex helps displace excess energy which decreases the chance of spring failure and assists with making your AR-15 more reliable.

  • Compared to the stock spring, The Geissele Super 42 Spring has a decreased tendency to lose length and force over a given round count. As an added bonus, it removes the annoying spring reverberations (twang) heard and felt by the shooter through the buttstock.
  • The Super 42 Spring has a 15% stronger average return force than the standard buffer spring. This will assist in stripping rounds out of the magazine when operating with a dirty weapon or when using steel-case ammo.
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Geissele Super Gas Block

Out of stock

$89.44

The Geissele Super Gas Block is a low-profile gas block, designed to fit under most free-floating handguards. Precision investment cast from 17-4 precipitation hardening stainless steel, the gas block provides corrosion resistance and strength to withstand thousands of rounds and never let you down.

  • Color: Black
  • Inner Diameter: .750″
  • Compatibility: AR10/AR15
  • Material: Precipitation Hardened Stainless Steel
  • Includes: Coil Pin, 2 Set Screws, Gas Tube Coil Pin, and Alignment Pin
View product
-36%
Add to compare

Geissele Super Precision – T1 Series Optic Mount

In stock

$98.98 – $154.02
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Geissele Automatics Folding BUIS – Front

Out of stock

$105.00 – $115.00

Whether running as your primary aiming system or relying on them as a back-up in case your main optic goes down, the Geissele Folding Sights will give you the performance you need and expect from a product designed and manufactured from the ground up in our facility located in North Wales, PA. The Geissele Folding Sights are made from 6061-T6 aluminum and are Type 3 hard coat anodized to ensure extreme durability.

  • Height: (deployed, from top of pic rail): 1.47″
  • Height: (folded, from top of pic rail): 0.49″
  • Length: 2.33″
  • Weight: 1.33oz
  • Front Post: .080″
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Geissele Automatics Folding BUIS – Rear

Out of stock

$105.00 – $115.00

Whether running as your primary aiming system or relying on them as a back-up in case your main optic goes down, the Geissele Folding Sights will give you the performance you need and expect from a product designed and manufactured from the ground up in our facility located in North Wales, PA. The Geissele Folding Sights are made from 6061-T6 aluminum and are Type 3 hard coat anodized to ensure extreme durability.

  • Height: (deployed, from top of pic rail): 1.60″
  • Height: (folded, from top of pic rail): 0.52″
  • Length: 2.46″
  • Weight: 1.56oz
  • Peep Aperature: .0.100″
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Geissele Automatics Super Duty Lower Parts Kit – No Grip

Out of stock

$105.00 – $110.00

The Geissele Super Duty Lower Parts Kit includes all the internal parts necessary to complete or rebuild your lower receiver.

1. Takedown Pin & Pivot Pin Detents (2)
2. Takedown Pin & Pivot Pin Springs (2)
3. Takedown Pivot Pin
4. Bolt Catch Plunger
5. Bolt Catch Spring
6. Bolt Catch Coiled Pin
7. Maritime Bolt Catch
8. Safety Detent
9. Buffer Retainer
10. Buffer Retainer Spring
11. Safety Detent Spring
12. Takedown Pin
13. Magazine Release Button
14. Magazine Release Spring
15. Posi-Snap Ambidextrous Safety Selector Assembly
16. Magazine Catch
17. Coiled Trigger Guard Pin
18. Super Duty Trigger Guard
19. Hex Key

Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Geissele Super Sabra Lightning Bow Trigger

Out of stock

$110.18
View product
Add to compare

Geissele Automatics Airborne Charging Handle (ACH)

Out of stock

$110.88 – $120.29
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Geissele Automatics Super Charging Handle – 5.56

Out of stock

$117.30 – $119.24
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Geissele Automatics URGI Airborne Charging Handle – USASOC

Out of stock

$118.32 – $130.93
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Geissele Automatics Ultra Duty Lower Parts Kit – No Grip

Out of stock

$145.00 – $150.00

The Geissele Ultra Duty Lower Parts Kit is made for the most demanding operators and includes all the internal parts necessary to complete or rebuild your lower receiver.

1. Takedown Pin & Pivot Pin Detents (2)
2. Takedown Pin & Pivot Pin Springs (2)
3. Checkered Takedown Pivot Pin
4. Bolt Catch Plunger
5. Bolt Catch Spring
6. Bolt Catch Coiled Pin
7. Maritime Bolt Catch
8. Safety Detent
9. Buffer Retainer
10. Buffer Retainer Spring
11. Safety Detent Spring
12. Checkered Takedown Pin
13. Magazine Release Button
14. Magazine Release Spring
15. Super Configurable Safety Selector
16. Magazine Catch
17. Coiled Trigger Guard Pin
18. Geissele Ultra Precision™ 5 Axis Trigger Guard
19. Hex Key

Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Geissele Automatics Super Charging Handle – 7.62

Out of stock

$146.49 – $153.00

The Super Charging Handle by Geissele Automatics is 3D machined from a solid block of aircraft-grade 7075-T6 aluminum. Its ambidextrous design allows for seamless operation from either side of the weapon.

  • Dual contoured similar to that of the charging handle of an M14, where not only the x-axis but also the y-axis receive radius cuts.
  • Handling surface of the lever is checkered, adding a textured grip aiding to the use when operating with gloves.
  • Heightened rear lip of the SCH aids in mitigating gas blowback to the shooter when shooting with short barreled and suppressed weapon systems.
  • All parts are Type 3 Hardcoat anodized and are available in black and DDC (Desert Dirt Color).
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Geissele Automatics Super Precision Trijicon ACOG 4X Mount

Out of stock

$147.41 – $165.00

The Super Precision ACOG Series was developed specifically to work with the Trijicon 4x power ACOG series of optics.

  • For the Trijicon ACOG series.
  • 2 precision-machined shear lugs.
  • Nut and clamp system providing over 1,000 pounds of clamping force.
  • Material: Aircraft-grade 7075 -T6 billet aluminum.
  • Weight: 2.6 ounces.
  • Mounting Platform: Picatinny.
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Geissele Automatics 2 Stage Trigger (G2S)

Out of stock

$170.00

The Geissele 2 Stage (G2S) was designed to be a high quality, cost-effective option of the Super Semi-Automatic SSA trigger. The G2S is a non-adjustable combat trigger that is a precision two-stage trigger and allows precise and accurate trigger control. The G2S is manufactured from the same tool steel as the SSA and the sears are also wire EDM cut. Visually, from the outside of the weapon there is no difference from the SSA and the feel and reliability are the same. The G2S however has a different way of holding the hammer pin in place, there is no laser markings, and the parts are only spot checked for MP.

  • Platform: AR15/AR10
  • Type: 2 Stage
  • 1st Stage Weight Range: 2.75 – 3 lbs.
  • 2nd Stage Weight Range: 1.5 – 1.75 lbs.
  • Total Pull Weight Range: 4.25 – 4.75 lbs.
  • Adjustable: No
  • Trigger Bow Type: M4 Curved
  • Recommended Use: Military, Law Enforcement, Home Defense
  • Pin Size: Mil-Spec
View product
Add to compare

Geissele Automatics Folding BUIS, Front and Rear Set

Out of stock

$200.24 – $215.00

The Geissele Folding Sights are made from 6061-T6 aluminum and are Type 3 hard coat anodized to ensure extreme durability. For optimal aiming precision, our sights can be adjusted at ½” increments at 100 yards. The adjustments for the front and rear sights are captive to ensure that once sighted-in, there won’t be any adjustments not intended by the user.

Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Geissele Automatics Super Dynamic Enhanced (SD-E) Trigger

Out of stock

$245.00
View product
Add to compare

Geissele Automatics Super Dynamic Combat (SD-C) Trigger

Out of stock

$245.00
View product
Add to compare

Geissele Automatics Super Semi-Automatic (SSA) Trigger

Out of stock

$245.00
View product
Add to compare

Geissele Automatics Super Semi-Automatic Enhanced (SSA-E) Trigger

Out of stock

$245.00
View product
Add to compare

Geissele Automatics Super Dynamic 3 Gun (SD-3G) Trigger

Out of stock

$245.00
View product
Add to compare

Geissele Automatics Super 3 Gun (S3G) Trigger

Out of stock

$245.00

The Geissele Super 3 Gun (S3G) is a semi-automatic, hybrid cross between a single-stage trigger and a traditional 2-stage trigger. Its robust feel and light pull weight, combined with a lightning-quick reset, make this trigger ideal for any 3 Gun competitor. The S3G trigger has a very short, light pull and reset. We do not recommend it for duty use, bench rest, accuracy work or shooting small groups. It is designed for close course competition use where rapid target engagement with quick follow-up shots are required.

  • Platform: AR15/AR10
  • Total Pull Weight: 3.0 – 4.0 lbs. (Lighter Spring), 4.5 – 5.5 lbs. (Heavier Spring)
  • Adjustable: No
  • Bow Type: M4 Curved
  • Recommended Use: 3 Gun Competition
  • Pine Size: Mil-Spec
View product
Add to compare

Geissele Automatics Single-Stage Precision (SSP) Trigger

Out of stock

$245.00
View product
Add to compare

Geissele Automatics Single Stage Precision (SSP) M4 Curved Bow Trigger

Out of stock

$245.00

The Single-Stage Precision (SSP) is Geissele Automatics’ first true single-stage trigger for the AR Platform.

  • Material: S7 Tool Steel.
  • Finish: Durable corrosion-resistant black oxide.
  • Platform: AR15/AR10.
  • Type: Single Stage.
  • Total Pull Weight Range: 3 – 3.75 lbs.
  • Adjustable: No.
  • Trigger Bow Type: M4 Curved.
  • Recommended Use: Target & Precision Shooting, Hunting.
  • Pin Size: Mil-Spec.
View product
Add to compare

Geissele Automatics Super Tricon Trigger

Out of stock

$245.00
View product
Add to compare

Geissele Automatics Super 700 Trigger for Remington 700

Out of stock

$250.00
View product
Add to compare

Geissele Automatics MK14 Super Modular Rail M-LOK – 9.3″

Out of stock

$280.50 – $306.00

The MK14 is the latest entry to the Geissele line up of Super Modular Rails. The new handguard design offers a smaller diameter and overall height to create a slimmer package. Included with the MK14 Super Modular Rail is an updated version of the proven Geissele Barrel Nut design, not only providing ease of installation but superior rigidity. The long surface contact of the 2.25” barrel nut interfaces with the receiver creating a platform that can be trusted to be straight and true the entire length of the free float rail. The MK14 is 3d precision machined using 6061-T6 Aluminum due to its strong, rigid and lightweight properties. Utilizing Magpul’s M-LOK technology in the 3, 6, and 9 o’clock positions allow the end user full customization and modularity of their rifle to securely mount lights, bipods and other firearm accessories. The Geissele MK14 Super Modular rail is finished in a durable and long lasting Type 3 Hardcoat Anodized available in either Black or Geissele’s DDC finish.

  • HEIGHT: 2.02″
  • COLOR: Black or DDC
  • MATERIAL: 6061-T6
  • FINISH: Type 3 Hardcoat Anodize
  • AVAILABLE LENGTHS: 9.3″
  • INNER DIAMETER: 1.27″
  • OUTER DIAMETER (DAQ*): 1.52″
  • SMR MK14 9.5″ WEIGHT: 8oz (9.6oz w/ barrel nut)
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Geissele Automatics MK4 Super Modular Rail M-LOK – 9.3″

Out of stock

$281.00 – $306.00

The Super Modular Rail (SMR) MK4 M-LOK™ is Geissele’s ultra-lightweight M-LOK option. These rails are purpose-built and feature integrated M1913 picatinny rail sections at the fore of the rail in the 3, 6 and 9 o’clock positions. Maximum venting for heat dissipation also dramatically reduces the rail’s overall weight, while maintaining its same strong and rigid platform. Utilizing Magpul’s M-LOK technology at the 3, 6, and 9 o’clock positions, as well as the upper 45 quadrants. The SMR MK4 is both versatile and modular, allowing the user to tailor their platform to his or her unique needs.

  • HEIGHT: 2.4″
  • COLOR: Black or DDC
  • MATERIAL: 6061-T6
  • FINISH: Type 3 Hardcoat Anodize
  • LENGTH: 9.3″
  • INNER DIAMETER: 1.35″
  • OUTER DIAMETER (DAQ*): 2.11″
  • SMR MK4 9.5″ WEIGHT: 9.3oz (11.2oz w/ barrel nut)
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Geissele Automatics MK8 Super Modular Rail M-LOK – 9.3″

Out of stock

$281.00 – $306.00
Select options This product has multiple variants. The options may be chosen on the product page
Load more products
Loading...