Shockwave Technologies
Shockwave Technologies Raptor Forend Tool For Mossberg 500
Out of stock
$15.95The Shockwave Technologies Raptor Forend Nut tool is an extra long stainless steel tool for the Mossberg 500 forend and Remington 870 forend. Remove and replace your forend in under two minutes.
- Precision-machined in Dunedin, Florida.
- Manufactured from 304 stainless steel.
- Won’t rust like a carbon steel tool.
- Won’t deform like a nylon or aluminum tool.
- Remove the most stubborn forend nuts.
- Insert a bar or screwdriver through one of the provided holes for extra leverage.
- Over 4″ long for reaching the deepest recessed nuts on the longest magazine tubes.
- No need to remove the magazine tube from your firearm.
- One side fits Mossberg 500 guns and the other Remington 870 and Hawk 982 guns.
- Fits 12-gauge guns with short, medium, long, or even extra long magazine tubes.
- Compatible with the Streamlight tactical forend.
Shockwave Technologies Raptor F1 Forend for Remington 870/TAC 14
In stock
$18.79 – $43.05The Shockwave Technologies Raptor F1 Forend is Made in America. With its enhanced texture, you gain a great hold on your firearm. Its glass-filled polymer construction is virtually indestructible. When you want to turn up your shotgun’s badass factor up to 11, reach for the Shockwave Raptor F1 forend. Cutting-edge design meets improved handling and fast target acquisition. A bolt-on replacement for your factory or aftermarket forend, the Shockwave F1 is available as a standalone forend, with an optional upper heat shield, and an optional forend installation tool— or any combination thereof.
- Rugged glass-reinforced polymer
- Lightweight
- Extra length lets you personalize forward handhold
- Ribbed inset area provides secure gripping
- Front and rear handstops improve safety
- A total of 10 M-LOK® slots for mounting lights, vertical grips, angled grips, Picatinny rails, and more
- Optional upper heat shield prevents burns and offers rifle sights for fast target acquisition
- Optional forend wrench simplifies and speeds installation
- Compatible with Remington 870 12-gauge firearms and Remington Tac 14 12-gauge firearms
- Veteran designed
- Made in U.S.A.
Shockwave Technologies Raptor F1 Forend for Mossberg 500/590
In stock
$19.89 – $44.42The Shockwave Technologies Raptor F1 Forend is Made in America. With its enhanced texture, you gain a great hold on your firearm. Its glass-filled polymer construction is virtually indestructible. When you want to turn up your shotgun’s badass factor up to 11, reach for the Shockwave Raptor F1 forend. Cutting-edge design meets improved handling and fast target acquisition. A bolt-on replacement for your factory or aftermarket forend, the Shockwave F1 is available as a standalone forend, with an optional upper heat shield, and an optional forend installation tool— or any combination thereof.
- Rugged glass-reinforced polymer
- Lightweight
- Extra length lets you personalize forward handhold
- Ribbed inset area provides secure gripping
- Front and rear handstops improve safety
- A total of 10 M-LOK® slots for mounting lights, vertical grips, angled grips, Picatinny rails, and more
- Optional upper heat shield prevents burns and offers rifle sights for fast target acquisition
- Optional forend wrench simplifies and speeds installation
- Compatible with Mossberg 500/590 12-gauge firearms
- Veteran designed
- Made in U.S.A.
Shockwave Technologies Raptor Grip for Mossberg 500 – Stealth Grey
Out of stock
$24.95The Shockwave Technologies Raptor Grip is Made in America. With its enhanced texture, you gain a great hold on your weapon. Its glass-filled polymer construction is virtually indestructible.
This is a new style of bird’s head grip (aka birdshead grip aka witness protection grip aka chicken head grip aka border patrol grip aka entry-style grip aka bad ass grip) developed and manufactured by Shockwave Technologies, LLC in the U.S.A.
- Unique angle of the Raptor Grip minimizes felt recoil, allowing maximum control shot after shot. It also just looks badass. Yes, mounting hardware and bolt hole plug are included. (Requires a 1/4″ hex wrench for installation, not included.)
- Fits a variety of 12g and 20g shotguns
- This is the 2nd generation model, includes bolt and bolt plug
- Available in Black, Flat Dark Earth, Stealth Grey and OD Green.
Shockwave Technologies Raptor Grip for Mossberg 500 – OD Green
Out of stock
$24.95The Shockwave Technologies Raptor Grip is Made in America. With its enhanced texture, you gain a great hold on your weapon. Its glass-filled polymer construction is virtually indestructible.
This is a new style of bird’s head grip (aka birdshead grip aka witness protection grip aka chicken head grip aka border patrol grip aka entry-style grip aka bad ass grip) developed and manufactured by Shockwave Technologies, LLC in the U.S.A.
- Unique angle of the Raptor Grip minimizes felt recoil, allowing maximum control shot after shot. It also just looks badass. Yes, mounting hardware and bolt hole plug are included. (Requires a 1/4″ hex wrench for installation, not included.)
- Fits a variety of 12g and 20g shotguns
- This is the 2nd generation model, includes bolt and bolt plug
- Available in Black, Flat Dark Earth, Stealth Grey and OD Green.
Shockwave Technologies Raptor Grip for Mossberg 500 – Flat Dark Earth
Out of stock
$24.95The Shockwave Technologies Raptor Grip is Made in America. With its enhanced texture, you gain a great hold on your weapon. Its glass-filled polymer construction is virtually indestructible.
This is a new style of bird’s head grip (aka birdshead grip aka witness protection grip aka chicken head grip aka border patrol grip aka entry-style grip aka bad ass grip) developed and manufactured by Shockwave Technologies, LLC in the U.S.A.
- Unique angle of the Raptor Grip minimizes felt recoil, allowing maximum control shot after shot. It also just looks badass. Yes, mounting hardware and bolt hole plug are included. (Requires a 1/4″ hex wrench for installation, not included.)
- Fits a variety of 12g and 20g shotguns
- This is the 2nd generation model, includes bolt and bolt plug
- Available in Black, Flat Dark Earth, Stealth Grey and OD Green.
Shockwave Technologies Raptor Grip for Mossberg 500
Out of stock
$24.95The Shockwave Technologies Raptor Grip is Made in America. With its enhanced texture, you gain a great hold on your weapon. Its glass-filled polymer construction is virtually indestructible.
This is a new style of bird’s head grip (aka birdshead grip aka witness protection grip aka chicken head grip aka border patrol grip aka entry-style grip aka bad ass grip) developed and manufactured by Shockwave Technologies, LLC in the U.S.A.
- Unique angle of the Raptor Grip minimizes felt recoil, allowing maximum control shot after shot. It also just looks badass. Yes, mounting hardware and bolt hole plug are included. (Requires a 1/4″ hex wrench for installation, not included.)
- Fits a variety of 12g and 20g shotguns
- This is the 2nd generation model, includes bolt and bolt plug
- Available in Black, Flat Dark Earth, Stealth Grey and OD Green.
Shockwave Technologies Raptor Grip for Remington 870 12-Guage Pump Action Shotgun Fixed Handle
Out of stock
$24.95The Shockwave Technologies Raptor Grip is MADE IN AMERICA. With its enhanced texture, you gain a great hold on your weapon. Its glass-filled polymer construction is virtually indestructible.
This is a new style of bird’s head grip (aka birdshead grip aka witness protection grip aka chicken head grip aka border patrol grip aka entry-style grip aka bad ass grip) developed and manufactured by Shockwave Technologies, LLC in the U.S.A.