Flat Dark Earth (FDE)

The Magpul M-LOK AFG (Angled Fore Grip) is the result of research and refinements done to the original AFG and AFG-2. By integrating the direct-attach M-LOK mounting system with minimalist construction we were able to produce a high strength grip that only weighs 1.2 ounces, including hardware.

• M-LOK AFG is ¾” shorter than the AFG-2
• M-LOK AFG is more compact than its predecessors
• Takes into account natural body mechanics to provide a comfortable and stable user interface
• M-LOK AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots.
• All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.

• Low-profile length for increased mobility and decreased “snag” factor.
• The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
• Can be mounted in reverse angle to increase control when grabbing handguard and grip
• Flat sides give better yaw control to the shooter during firing and non-firing manipulations.
• Aggressive texture and storage volume combined with modular design to allow improvements and adaptation in the future.
• Cross bolt designed to work with improvised tools (such as a quarter) and allow for easy adjustment or re-tightening.
• Reversible clamps allow user to set up fasteners to reside on either side.
• Spring-loaded clamps makes installation and removal easier.
• Made in the U.S.A., and manufactured from high quality, impact resistant polymers.

*Test fit to ensure proper function (may display attributes consistent with this QC process)

The Arisaka Finger Stop was developed as a low profile, minimal control accessory. This version is for 1913 Picatinny rails. It has a slim profile which is ergonomically designed to be located between your index and middle fingers. This typically places it further forward on the handguard, which means it doesn’t get in the way when transitioning to kneeling or prone shooting positions, where most people move their support hand towards the rear.

• Height: 0.75” above 1913 Picatinny rail
• Width: 0.68″
• Weight: 0.4 oz
• CNC machined from 6061-T6 aluminum
• MIL-A-8625 Type III hard coat anodized
• Requires a 3/32″ Allen wrench for installation (not included)
• Made in the USA.

The Patent Pending Arisaka Finger Stop was developed as a low profile, minimal control accessory. This version is for M-Lok rail systems.

• Height: 0.85″
• Width: 0.50″
• Weight: 0.4 oz
• CNC machined from 6061-T6 aluminum
• MIL-A-8625 Type III hard coat anodized
• Requires a 9/64″ Allen wrench for installation (not included)
• Made in the USA.
• Patent Pending.

The Patent Pending Arisaka Inline Scout Pro Mount is designed specifically for the Surefire Scout Light Pro swivel bodies. This mount is a drop-in replacement for the OEM M-Lok mount, and allows for optimal positioning with lasers, plus can be used in a cantilever fashion off the end of the handguard for less barrel or suppressor shadow.

• Length: 3.0″
• Weight: 0.8 oz
• Material: 7075-T6 aluminum
• Finish: Type III Hard Coat Anodized
• Platform: M-LOK
• Made in the USA

The Cloud Defensive “Torrent series”. Manufactured by Impact Weapons Components in conjunction with Haley Strategic Partners. Strong and versatile light mounts.

• For use with Cloud Defensive REIN, Modlite PLHv2 and OKW, Surefire M300, M600 Scout (except M600 AA), Streamlight Protac Rail Mount 1, 2, and all replacement M300 and M600 bodies, including backbone and M-LOK® compliant rails.
• 6 light mounting positions provide .626” of lateral adjustment to clear all laser aiming devices
• Positions the light as close to the firearm bore or APITAL as possible
• Light offset optimized at a 45 degree offset for ergonomic activation
• Ambidextrous with 6 total mounting solutions on 3 sided M-LOK® rail system
• Low profile, lightweight and does not impede weapons manipulation
• Mount does not interfere with the operation of front back-up iron sights

• Unique Patented design utilizes a slot that ensures a snug, perfect friction-fit for the tape switch. Once installed its not coming out unless you want it to.
• Precision CNC machined from Certified 6061 aluminum for superior strength.
• Proprietary dual cable control channels machined into the one-piece mount.
• Proprietary “Early Cable Exit” machined into each cable control channel. This allows you to only use part of the cable control channel should you need more slack in the cable to span across the handguard, et.
• 100% MADE IN THE USA

The MOE AK+ Grip combines reinforced polymer body construction with comfortable, wrap-around rubber overmolding for maximum weapon control in adverse environments.

• Rubber overmold on reinforced polymer construction
• Hard polymer bottom edge prevents snags and grip damage
• Grip counts as one US compliance part for 922(r).
• Storage core capability accepts optional cores
• Includes a basic grip cap, but accepts optional storage cores for customized gear stowage
• Designed to improve ergonomics and weapon control
• Drop-in upgrade for AKM/AK-47/AK-74/AK-101/AK-103 pistol grips*
• Fits both milled and stamped receivers, including those with grip reinforcement plates

A drop-in upgrade for AK-pattern pistol grips, the MOE AK Grip is designed to improve ergonomics and comes with an aggressive TSP texture for positive weapon control.

• Fits both milled and stamped receivers
• One-piece reinforced polymer construction
• Storage core capability accepts optional cores
• Aggressive tsp texture

Designed as a drop-in upgrade for the standard AR15/M4 pistol grip, The MOE-K Grip provides an extremely low profile and compact design with a steeper grip angle compared to more traditional styles. The more vertical grip angle is optimized for use on PDW (Personal Defense Weapon) configurations and improves comfort and control on short LOP rifles that bring the primary hand in closer to the shooter’s body. The thin profile and lack of backstrap ‘beavertail’ also makes it an excellent choice for shooters who prefer a smaller grip circumference. All mounting hardware included. Made in U.S.A.

• Replacement for AR15/M4 pistol-grip
• One-piece reinforced polymer construction
• More vertical grip angle than standard A2 grips
• Minimalist design provides for a compact and thin profile
• Aggressive TSP texture (Trapezoidal Surface Projections) for positive weapon control in all environments
• Specifications

The MOE-K2+ Grip combines reinforced polymer body construction with comfortable, wrap-around rubber overmolding for maximum weapon control in adverse environments. Similar in concept to the smaller MOE-K, the MOE-K2 is a drop in upgrade for AR15/M4’s that offers a more vertical grip angle, but in a full-size grip design. The steeper vertical grip angle is optimized for use on PDW (Personal Defense Weapon) configurations and improves comfort and control on short LOP rifles that bring the primary hand in closer to the shooter’s body. With the rubber overmolding for positive weapon control, compatibility with optional Storage Cores for gear stowage, and a unique backstrap design for proper trigger finger placement, the K2+ brings modern styling, ergonomics, and comfort to the AR platform. All mounting hardware and a basic grip cap included. Made in U.S.A.

• Replacement for AR15/M4 pistol-grip*
• One-piece reinforced polymer construction with wrap-around rubber overmolding
• More vertical grip angle than standard A2 grips
• Unique backstrap design for proper trigger finger placement
• Hard-polymer bottom edge to reduce equipment snags or grip damage
• Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage