Used - Excellent Condition

BCMGUNFIGHTER™ Vertical Grip Mod 3 (M-LOK® Compatible)

Direct Attach Version

• Low-profile length for increased mobility and decreased “snag” factor.
• The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
• Can be mounted in reverse angle to increase control when grabbing handguard and grip.
• Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations.
• A lightweight design at 1.9 ounces.
• Made in the U.S.A., manufactured from high quality, impact resistant polymers.

The PWS Ratchet Lock Castle Nut End Plate set works with mil-spec OR commercial buffer tubes and eliminates the need for staking. A quick upgrade to any rifle build, the Ratchet Lock Castle Nut End Plate features a QD mount and easy installation with any buffer tube.

The Arisaka Ring Light Mount provides a flexible yet secure way to attach handheld lights to your handguard. Available for KeyMod, M-Lok, and CMR interfaces, it uses a vertically anchored ring system that comes in two sizes to accommodate a wide variety of lights.

The clamping ring will accept light bodies with a diameter from 1.00″ to 1.03.” A light can be installed and removed without having to take the mount off your handguard.

The offset placement of the light while using the mount is designed to allow clearance with most front sights. For example, a 1.03″ light like the Surefire G2 will work with the Magpul Gen 2 MBUS on a Noveske NSR, which is one of the thinnest handguards at 1.48″ wide.

• Weight: 1.0 oz.
• The mount is CNC machined from 6061-T6 aluminum
• MIL-A-8625 Type III hard coat anodized.
• Requires a 3/32″ Allen wrench for installation (not included).
• Made in the USA.

The Patent Pending Arisaka Offset Picatinny Mount is a combination of our Offset Scount Mount and Picatinny adapter, and is meant for use with Picatinny based lights like the Surefire X300 or Inforce WML, plus other rail mounted accessories.

• Length: 1.77″
• Height: 0.20″ (at Surefire Scout Light mounting point)
• Weight: 1.0 oz
• The mount is CNC machined from 6061-T6 aluminum and MIL-A-8625 Type III hard coat anodized
• Requires a 5/64″ Allen wrench for installation (not included).
• Made in the USA

The Patent Pending Arisaka Offset Scout Mount is designed specifically for the Surefire Scout Light M600 and M300 series weapon lights, the Modlite PLH and OKW weapon lights, the Arisaka 300 and 600 Series Lights, the Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser), and Olight Odin. It replaces the stock Picatinny rail adapter with a low profile mount for M-Lok handguards. The Offset Scout Mount is very low profile at less than 0.20″ thick.

• Weight: 0.4 oz
• Length: 1.265”
• CNC machined from 6061-T6 aluminum
• MIL-A-8625 Type III hard coat anodized.
• Requires an IP25/T25 and IP20/T20 Torx driver for installation (not included)
• M620 series lights can also be used with the Offset Scout Mount with the addition of the Arisaka Offset M620 Adapter.
• Includes necessary screws to attach light body to mount.
• Made in the USA.

Bravo Company’s BCM Gun Fighter’s Grip Mod 3 grip allows for a reduced angle and improved ergonomics when shooting in the modern gun fighting stances. The Mod 3 is up to a quarter of an inch wider than the BCMGUNFIGHTER Mod 0 and Mod 1 grips. Each grip features an extended forward tang to close the gap between the trigger guard and pistol grip” and a high rise “beavertail” style back strap. Made in the USA and manufactured from high-quality impact resistant polymers.

• Reduced angle for improved ergonomics and trigger control
• Hinged trap door offering storage inside the grip with a water-resistant rubber gasket
• Each grip features an extended forward tang to close the gap between the trigger guard and pistol grip, and a high rise “beavertail” style back strap.
• Up to a quarter of an inch wider than the BCMGUNFIGHTER Mod 0 and Mod 1 grips.
• Made in the USA and manufactured from high-quality impact resistant polymers.
• Each grip test fit to ensure proper function (may display attributes consistent with this QC process)

Over a year in design, development, and testing. Bravo Company introduces the BCMGUNFIGHTER Stock. The strongest lightweight polymer stock available for your mil-spec receiver extension is here!

• Snag free Design. No sharp edges prevent tangling of the rifle with the shooter’s sling, molle gear, or other kit.
• Modular VBOST (Vehicle Borne Operations Sling Tab) – This tab interfaces with the shooter’s riggers’ band or bungee to secure the shooter’s sling against the stock when the carbine is not in use. Increasingly, this is the most common application when operating inside a vehicle.
• 2 different types of ambidextrous sling mounting options, including QD swivel sockets.
• Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.
• Available in Black, Flat Dark Earth, Foliage Green, and Wolf Gray.
• United States Patent Number: 9,109,855

Durability and dead-on accuracy have made Troy Industries Folding Battle Sights the hands-down choice of Special Ops and tactical users worldwide. Easy to install and to deploy, with no levers or springs to fumble with, these sights position apertures at exact factory height. A stainless-steel cross-locking system ensures sights remain upright and zeroed under extreme combat conditions.

• Flip up Sight Easily Deployed
• .50 MOA Click Adjustments
• Material: T6 Aircraft Grade Aluminum with stainless steel components
• Finish: Mil-Spec hardcoat anodizing
• Durable construction remains zeroed under extreme conditions
• Made in USA

ESF-H1 is a drop-in end plate replacement for the AR platform and has a single rear-facing QD swivel socket.

• Machined from 4140 steel.
• 1 QD swivel socket.
• For AR-15/AR-10.
• Socket has no limiters.
• Made in the USA.

RE5F is a 9 position receiver extension (RE), it is also compatible with Vltor’s splendid A5.

• Material: Impact extruded 7075 aluminum with rolled threads.
• Finish: Black anodize.
• The interior is dry film lubed.
• The body diameter is milspec (compatible with all milspec carbine stocks).
• Extra drain holes to better and more quickly drain water inside the RE.
• Softened sharp corners.
• Collaboration with SOLGW and is identical to Sons of Liberty Gunworks Loyal 9 A5 RE.
• 308 AR-compatible.

The BT46-LW17 PSR (Precision Sniper Rifle) Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-170-S lever. It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. Available in black only.

The BT46-LW17 was selected for the SOCOM PSR (Precision Sniper Rifle) Weapons System.

• Height Range: 4.75 – 9.0″ approximately
• Preloaded Pan: 15 degrees +/-
• Preloaded Cant: 15 degrees +/-
• Fore and Aft pivot limiting Bosses
• 5 leg positions: 0, 45, 90, 135 and 180 degrees
• Non-Rotating Legs: outer leg does not rotate around inner leg
• Larger, stronger inner legs
• Weight: 13.61 ounces

The Airborne Charging Handle (ACH) was developed at the request of an elite organization famous for its expertise in aerial insertion. The organization requested a lower profile lever design to reduce the chances of snagging.

• The ACH’s lower profile design is especially ideal for rifles where the primary sighting system is a red dot or similar low profile optic system.
• The ambidextrous ACH is 3D machined from a solid block of aircraft-grade 7075-T6 aluminum.
• Shortened levers are dual contoured with gently concaved radius cuts in the vertical and horizontal planes.
• The handling surfaces of the levers are checkered for confident operation while wearing gloves.
• A taller fence at the rear of the ACH aids in redirecting gas blow back when shooting with short barreled and suppressed weapon systems.
• The ACH and its components are Type 3 Hardcoat anodized and are available in Black and DDC (Desert Dirt Color).