Used - Excellent Condition

Add to compare

Open Box Emissary Development Micro Cable Clip

In stock

$9.95 – $11.20

Serious cable management with a tiny footprint. Cable Clip Micro is a highly modular wire guide system designed for M-LOK rails.

  • Easily control, organize and route electrical cables and wires.
  • Sold as a 3-pack
  • Clean up your rail and reduce snag hazards.
  • 360-degree rotatable with nearly unlimited adjustability.
  • Patent pending
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Open Box American Defense AD-DELTA Scope Mount 34mm – Titanium Level

In stock

$159.69

The AD-DELTA mount features the Patented QD Auto Lock(tm) Lever system which has the following advantages:

  • Does not require proprietary tools for adjustment.
  • Can be adjusted with your finger or a flat-blade screwdriver.
  • The lever can be configured to lock to the front or the rear.
  • Superior clamping surface to ensure maximum rail engagement.
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Open Box Killer Innovations Velocity Glock Compensator

In stock

$75.69 – $92.30

Killer Innovation’s Velocity Glock Compensator is “braking” all the rules! This compensator significantly reduces recoil and muzzle climb and attaches in an innovative new way that is completely different than any other compensator on the market. This revolutionary attachment system has a few advantages over the traditional methods.

Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Open Box Cloud Defensive Light Control System for Streamlight ProTac Switch – LCSMK2, Polymer

In stock

$32.19 – $34.99

The LCSMK2J is the absolute best Polymer mounting solution for tape/pressure switches used to operate the Streamlight HLX ProTac Series Weaponlights.

  • The LCSmk2j features an “Early Exit” feature for the cables. This allows you to run the cable halfway through a given cable channel and then exit the bracket “early” if need more cable slack for a given setup.
  • The LCS Series Locks up 100% to your weapon. Zero movement. Zero play. Virtually indestructible.
  • A low-profile design with heavily radiused/chamfered edges ensures comfort and ergonomic function.
  • Length: 3.5″
  • Width: 1.32″
  • Height: .575″ (switch sits .052″ above the top edge of rail)
  • 100% MADE IN THE USA
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Open Box Shockwave Technologies Raptor F1 Forend for Mossberg 500/590

In stock

$21.14 – $21.56

The Shockwave Technologies Raptor F1 Forend is Made in America. With its enhanced texture, you gain a great hold on your firearm. Its glass-filled polymer construction is virtually indestructible. When you want to turn up your shotgun’s badass factor up to 11, reach for the Shockwave Raptor F1 forend. Cutting-edge design meets improved handling and fast target acquisition. A bolt-on replacement for your factory or aftermarket forend, the Shockwave F1 is available as a standalone forend, with an optional upper heat shield, and an optional forend installation tool— or any combination thereof.

  • Rugged glass-reinforced polymer
  • Lightweight
  • Extra length lets you personalize forward handhold
  • Ribbed inset area provides secure gripping
  • Front and rear handstops improve safety
  • A total of 10 M-LOK® slots for mounting lights, vertical grips, angled grips, Picatinny rails, and more
  • Optional upper heat shield prevents burns and offers rifle sights for fast target acquisition
  • Optional forend wrench simplifies and speeds installation
  • Compatible with Mossberg 500/590 12-gauge firearms
  • Veteran designed
  • Made in U.S.A.
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Open Box Blue Force Gear Vickers 2-Point Padded Sling

In stock

$48.99 – $59.74

The Patent Pending Padded Vickers Sling combines the tactical sling capability of the Vickers Sling with the added comfort of a padded rear section. The 2” inline pad doesn’t move up or down the sling and is made from closed-cell foam that won’t separate or gain water weight. The front section with the Quick Adjuster allows the user to instantly lengthen and shorten the sling – quickly transitioning from a “hands-free” carry to a shooting position with a simple pull of the Adjuster.

  • 1.25” webbing can be looped through sling swivels, buttstock slots, or combined with sling hardware (available separately)
  • Fits standard M4 carbines and other rifles
  • Can be mounted upside down (Adjuster to the rear) on traditional bolt action rifles and shotguns for a “muzzle up” carry
  • Military Applications
  • Plastic nylon adjuster/tri-glides
Select options This product has multiple variants. The options may be chosen on the product page
-18%
Add to compare

Open Box Unity Tactical TAPS Dual Pressure Switch – Standard Model

In stock

$92.60 – $131.95

TAPS (Tactical Augmented Pressure Switch) from TNVC and Unity Tactical is a complete one point command and control system for all weapon-mounted electronics.

  • Provides low profile, dual-device control for lights and lasers.
  • TAPS allows placement of weapon accessories in optimal location while providing a single point of actuation of the operator’s choosing.
  • Rather than needing to place both light and laser where they can be activated directly, or needing to find places for multiple remote pressure pads while securing loose cables, TAPS literally places control at the operator’s fingertips in a single, user-friendly package.

2019 Updated Model! The TAPS Standard now features Unity Tactical built wire cables and wire leads.

Select options This product has multiple variants. The options may be chosen on the product page
-28%
Add to compare

Open Box Timney Triggers Competition Trigger for AR-15 – Curved, Skeletonized

In stock

Original price was: $274.99.Current price is: $196.96.

The self-contained module is ready to install in your small-pin AR and delivers an exceptionally smooth, crisp, creep-free single-stage trigger pull that feels more like a traditional bolt action than a combat rifle trigger.

  • Model: Skeletonized Trigger.
  • 100% drop-in—no gunsmithing, fitting, or adjusting required.
  • All components are captive in the lightweight, aluminum alloy housing.
  • Hammer is wire-EDM machined from S7 tool steel.
  • Other components are EDM cut from A2 tool steel, then heat-treated to Rc 56-60 for long service life.
  • Precision-ground engagement surfaces ensure superb reliability and a crisp, clean hammer release.
  • Installs using your rifle’s original hammer/trigger pins; proprietary design eliminates pin walkout
Select options This product has multiple variants. The options may be chosen on the product page
-17%
Add to compare

Open Box Esstac DStac Tear-Away Medical MOLLE Pouch

In stock

$34.20 – $41.71

The DStac Med pouch is a tear away pouch designed to carry a CAT/SOFTTW and (up to) a 6″ Isreali bandage, with additional storage inside the pouch for small items.

  • Secured with Velcro as well as a buckle closure
  • Top flap has loop Velcro for attachment of medical patches.
  • Measures approximately 7″ x 3″ x 3″
  • Stores TQ behind elastic external bands
  • Requires mounting hardware
Select options This product has multiple variants. The options may be chosen on the product page
-19%
Add to compare

Open Box Raine Shooters Armband Tactical Sleeve

In stock

$24.27 – $26.26

Raine Inc Shooters Armband (QB Tactical Sleeve).

  • Perfect for competition shooters and athletes
  • Shooters can use to hold dope cards and measurements
  • Quarterbacks can utilize three windows to display play sheets
  • Front Window: 5” X 2.75”
  • Larger Interior Window: 5.5” X 2.75”
  • Smaller Interior Window: 4.75″ X 2.75″
Select options This product has multiple variants. The options may be chosen on the product page
-37%
Add to compare

Open Box RS Regulate GAR-10M-R Galil ACE M-LOK Rail

In stock

$145.04 – $159.20

The GAR-10M-R is a 10 inch drop in M-LOK rail for Gen 1 Galil ACE rifles with a single long cross-bolt handguard.

  • Mounts similarly to the factory handguards
  • M-LOK slots for optimized accessory attachment
  • Material: Aircraft grade aluminum
  • Finish: Black Type 3 Mil-Spec Hard Anodized
Select options This product has multiple variants. The options may be chosen on the product page
-56%
Add to compare

Open Box Esstac 5.56 Triple Tall KYWI Pouch

In stock

$28.90 – $54.88

With A straight forward, user friendly and highly intuitive design the single KYWI mag pouch is like no other. Utilizing a hybrid kydex and nylon design, you get all the rigidity you would expect from a kydex pouch and the lack of noise you want from a nylon pouch. These pouches feature a kydex wedge insert (KYWI) that provide the needed retention to secure your magazines without the need for bungee cord for rapid mag changes.

  • This pouch is made for STANAG magazines: AR15/M4 style magazines
  • AK magazines will NOT fit in this pouch
  • Hybrid kydex and nylon design
  • Size: 5.25″ Tall x 9.25″ wide
  • Requires mounting hardware
Select options This product has multiple variants. The options may be chosen on the product page
-27%
Add to compare

Open Box Spiritus Systems MOLLE TUBES Cummerbund

In stock

$65.37 – $110.73

The TUBES™ MOLLE Cummerbund was designed to be a lightweight and simple load carriage solution for the LV/119 series of vests.

  • Features the officially licensed First Spear TUBES™ Attachments systems.
  • Utilize any MOLLE accessory for an almost infinite amount of configurations for mission needs.
  • The TUBES™ is a great option for those who are in and out of their vest frequently and have experienced wear and tear on their Hook/Loop attachment vests.
  • The cummerbund attaches inside the plate bag.
  • The design creates a smooth profile when worn underneath clothing.
Select options This product has multiple variants. The options may be chosen on the product page
-27%
Add to compare

Open Box Arisaka Defense Optic Leveler – Combo Tool Kit

In stock

$26.89 – $30.73

The Arisaka Optic Leveler is an inexpensive, easy-to-use tool for leveling scopes mounted in rings or one-piece mounts. The base plate sits on the Picatinny rail or one-piece mount just below the turret cluster of the scope, and then the matching wedge is inserted from the side. As the 11 degree ramped surfaces of the wedge and base engage, the top of the wedge rises upwards and contacts the turret cluster, automatically leveling it.

  • Combo Kit Included Small and Large Leveler
  • Material: 6061-T6 clear anodized aluminum.
  • Made in the USA.
Select options This product has multiple variants. The options may be chosen on the product page
-10%
Add to compare

Open Box Arisaka Defense Side Scout Mount M-LOK (SSM-M)

In stock

Original price was: $37.00.Current price is: $33.17.

The Arisaka Side Scout Mount (SSM) is designed for use with Surefire Scout Lights, the Arisaka 300 and 600 Series, and the Streamlight Protac Rail Mount lights. It replaces the stock Picatinny rail adapter with a low profile mount for M-Lok handguards, and tucks the light underneath either side of the ATPIAL laser/illuminator series, including the ATPIAL-C, AN/PEQ15, and LA-5/PEQ. It will also allow the light to clear the QD lever on the Steiner DBAL I2, A3, and D2.

Select options This product has multiple variants. The options may be chosen on the product page
-43%
Add to compare

Open Box Shockwave Technologies Raptor Grip for Mossberg 500

In stock

$17.07 – $17.20

The Shockwave Technologies Raptor Grip is Made in America. With its enhanced texture, you gain a great hold on your weapon. Its glass-filled polymer construction is virtually indestructible.

This is a new style of bird’s head grip (aka birdshead grip aka witness protection grip aka chicken head grip aka border patrol grip aka entry-style grip aka bad ass grip) developed and manufactured by Shockwave Technologies, LLC in the U.S.A.

  • Unique angle of the Raptor Grip minimizes felt recoil, allowing maximum control shot after shot. It also just looks badass. Yes, mounting hardware and bolt hole plug are included. (Requires a 1/4″ hex wrench for installation, not included.)
  • Fits a variety of 12g and 20g shotguns
  • This is the 2nd generation model, includes bolt and bolt plug
  • Available in Black, Flat Dark Earth, Stealth Grey and OD Green.
Select options This product has multiple variants. The options may be chosen on the product page
-43%
Add to compare

Open Box Shockwave Technologies Raptor Grip for Remington 870 12-Guage Pump Action Shotgun Fixed Handle

In stock

$17.07 – $17.20

The Shockwave Technologies Raptor Grip is MADE IN AMERICA. With its enhanced texture, you gain a great hold on your weapon. Its glass-filled polymer construction is virtually indestructible.

This is a new style of bird’s head grip (aka birdshead grip aka witness protection grip aka chicken head grip aka border patrol grip aka entry-style grip aka bad ass grip) developed and manufactured by Shockwave Technologies, LLC in the U.S.A.

Select options This product has multiple variants. The options may be chosen on the product page
-30%
Add to compare

Open Box Shockwave Technologies Raptor F1 Forend for Remington 870/TAC 14

In stock

$17.55 – $33.62

The Shockwave Technologies Raptor F1 Forend is Made in America. With its enhanced texture, you gain a great hold on your firearm. Its glass-filled polymer construction is virtually indestructible. When you want to turn up your shotgun’s badass factor up to 11, reach for the Shockwave Raptor F1 forend. Cutting-edge design meets improved handling and fast target acquisition. A bolt-on replacement for your factory or aftermarket forend, the Shockwave F1 is available as a standalone forend, with an optional upper heat shield, and an optional forend installation tool— or any combination thereof.

  • Rugged glass-reinforced polymer
  • Lightweight
  • Extra length lets you personalize forward handhold
  • Ribbed inset area provides secure gripping
  • Front and rear handstops improve safety
  • A total of 10 M-LOK® slots for mounting lights, vertical grips, angled grips, Picatinny rails, and more
  • Optional upper heat shield prevents burns and offers rifle sights for fast target acquisition
  • Optional forend wrench simplifies and speeds installation
  • Compatible with Remington 870 12-gauge firearms and Remington Tac 14 12-gauge firearms
  • Veteran designed
  • Made in U.S.A.
Select options This product has multiple variants. The options may be chosen on the product page
-5%
Add to compare

Open Box True North Concepts GripStop – Standard Length for M-LOK

In stock

Original price was: $51.99.Current price is: $49.50.

Standard length GripStop for M-LOK Rails. Increased ergonomics and control on all M-LOK compatible firearms.

  • Fits the Magpul M-LOK mounting interface
  • Weight : 2 oz with hardware
  • Rugged 6061-T6 Aluminum construction
  • MilSpec Type III anodized finish

Note: Shades of FDE (Earth Brown) may vary due to the chemical process during the Type 3 Hardcoat.

Select options This product has multiple variants. The options may be chosen on the product page
-21%
Add to compare

Open Box American Defense Trijicon RMR Mount 1.42″ – Titanium Lever

In stock

Original price was: $97.99.Current price is: $77.37.

The AD-RMR-CO-STD-TL mount was designed for the Trijicon RMR and places the optic in a absolute co-witness height.

  • Precision CNC machined from a block of 6061 T6 aluminum
  • Finished in hard coat type 3 Mil-Spec anodize
  • Fully adjustable to fit both in spec and out of spec rail systems
  • American Defense MFG, LLC. products feature a lifetime warranty
  • Features the all-new Titanium QD Auto Lock™ Lever system
  • Made with pride in the U.S.A.
Select options This product has multiple variants. The options may be chosen on the product page
-19%
Add to compare

Open Box American Defense Trijicon MRO Mount 1.57″ – Titanium Lever

In stock

Original price was: $137.82.Current price is: $112.20.

The AD-MRO-11-STD-TL mount is designed for the Trijicon MRO and places the optic in a Lower 1/3rd co-witness height.

  • Precision CNC machined from a block of 6061 T6 aluminum
  • Finished in hard coat type 3 Mil-Spec anodize
  • Fully adjustable to fit both in spec and out of spec rail systems
  • American Defense MFG, LLC. products feature a lifetime warranty
  • Features the all-new Titanium QD Auto Lock™ Lever system
  • Made with pride in the U.S.A.
Select options This product has multiple variants. The options may be chosen on the product page
-18%
Add to compare

Open Box Arisaka Defense Offset Picatinny Mount – M-LOK

In stock

Original price was: $60.00.Current price is: $49.02.

The Patent Pending Arisaka Offset Picatinny Mount is a combination of our Offset Scount Mount and Picatinny adapter, and is meant for use with Picatinny based lights like the Surefire X300 or Inforce WML, plus other rail mounted accessories.

  • Length: 1.77″
  • Height: 0.20″ (at Surefire Scout Light mounting point)
  • Weight: 1.0 oz
  • The mount is CNC machined from 6061-T6 aluminum and MIL-A-8625 Type III hard coat anodized
  • Requires a 5/64″ Allen wrench for installation (not included).
  • Made in the USA
Select options This product has multiple variants. The options may be chosen on the product page
-38%
Add to compare

Open Box ZRODelta DLOC-Micro T1 45 Degree Mount

In stock

Original price was: $149.00.Current price is: $91.92.
  • Fits the Aimpoint Micro T1
  • Designed to mount a Micro T1 at a 45 degree angle next to your primary optic which makes it ideal for close range shooting
  • The mount features the ability to attach to either the right or left side of the weapon
  • Optic will maintain zero if taken off for storage or other purposes, providing a true “Return to Zero” when re-attached
  • DLOC system utilizes six (6) engagement points with three (3) recoil lugs allowing our mount to grab more rail than any other mount on the market
  • Heavy duty springs allows for solid retention as well as one handed manipulation
  • The extreme grip by the DLOC mount allows users to only hand tighten the retention knob
  • Designed to allow for quick detachment/attachment
  • Tightening knob allows for hand tightening to rail without worry of mount integrity
  • Anodized, anti-reflective coating standard
Select options This product has multiple variants. The options may be chosen on the product page
-50%
Add to compare

Open Box Arisaka Defense Offset Optic Mount (Base Only)

In stock

$52.68 – $78.29

The Patent Pending Arisaka Offset Optic Mount is a modular mounting solution that allows the user to select a 35 or 45 degree offset position for a red dot sight without requiring additional components. The 35-degree position brings the red dot sight up closer to slimmer, smaller scopes, while the 45-degree position provides additional clearance around wider turrets or larger, higher magnification scopes.

  • Designed to be attached to the top Picatinny rail of an AR15 rifle.
  • When the rifle is canted to make use of the offset red dot sight, the optic remains centered over the bore and maintains a lower 1/3 co-witness height.
  • The base and optic plates can be reversed, allowing for use on the left or right side.
Select options This product has multiple variants. The options may be chosen on the product page
-34%
Add to compare

Open Box Arisaka Defense Offset Optic Mount (Plate Only)

In stock

$16.59 – $23.61

The Patent Pending Arisaka Offset Optic Mount is a modular mounting solution that allows the user to select a 35 or 45 degree offset position for a red dot sight without requiring additional components. The 35-degree position brings the red dot sight up closer to slimmer, smaller scopes, while the 45-degree position provides additional clearance around wider turrets or larger, higher magnification scopes.

  • Designed to be attached to the top Picatinny rail of an AR15 rifle.
  • When the rifle is canted to make use of the offset red dot sight, the optic remains centered over the bore and maintains a lower 1/3 co-witness height.
  • The base and optic plates can be reversed, allowing for use on the left or right side.
Select options This product has multiple variants. The options may be chosen on the product page
-6%
Add to compare

Open Box Arisaka Defense Low Profile Picatinny Rail – KeyMod

In stock

$18.79 – $28.29

The Arisaka Low Profile Picatinny Rail is a 5 or 3 slot Picatinny rail for KeyMod handguard systems. It offers a reduced height to pull any Picatinny accessories closer to the handguard.

  • Picatinny slots: 5 or 3
  • Height over mounting surface: 0.277″
  • Length: 2.15″ (5 slot), 1.37″ (3 slot)
  • Weight: 0.6 oz (5 slot), 0.4 oz (3 slot)
  • CNC machined from 6061-T6 aluminum and MIL-A-8625 Type III hard coat anodized.
  • Requires a T15 Torx wrench for installation (not included).
  • BCM KeyMod screws are covered under US Patent 9377274.
  • Made in the USA.
Select options This product has multiple variants. The options may be chosen on the product page
-31%
Add to compare

Open Box Arisaka Defense Side Scout Mount KeyMod (SSM-K)

In stock

$25.44 – $39.27

The Arisaka Side Scout Mount (SSM-K) for KeyMod rails is designed for use with Surefire Scout Lights, the Arisaka 300 and 600 Series, and the Streamlight Protac Rail Mount lights. It replaces the stock Picatinny rail adapter with a low profile mount for M-Lok handguards, and tucks the light underneath either side of the ATPIAL laser/illuminator series, including the ATPIAL-C, AN/PEQ15, and LA-5/PEQ. It will also allow the light to clear the QD lever on the Steiner DBAL I2, A3, and D2.

  • Length: 1.265″
  • Thickness: 0.2″
  • Weight: 0.6 oz
  • CNC machined from 6061-T6 aluminum
  • MIL-A-8625 Type III hard coat anodized.
  • Includes necessary screws to attach light body to mount.
  • Requires a T15 and IP20/T20 Torx driver for installation (not included).
Select options This product has multiple variants. The options may be chosen on the product page
-10%
Add to compare

Open Box Arisaka Defense Inline Scout Mount – M-LOK

In stock

$33.17

The Patented Arisaka Inline Scout Mount is designed specifically for the Surefire Scout Light M600 and M300 series weapon lights, the Arisaka 300 and 600 Series Lights, and the Streamlight Protac Rail Mount 1, 2, and HL-X. It replaces the stock Picatinny rail adapter with a low-profile mount for M-Lok handguards. The mount is especially useful on handguards that feature 45-degree angle mounting flats, such as the BCM MCMR, Geissele Automatics SMR MK4 and MK8, Daniel Defense MFR, KAC URX4, ALG Defense EMR, MI Gen 3, Mega MML, and Mega/Hodge Wedge Lock.

  • Length: 3.0”
  • Height: 0.20″ (at Surefire Scout Light mounting point)
  • Weight: 0.6 oz
  • Material: 7075-T6 aluminum
  • Finish: Type III Hard Coat Anodized Black, FDE, and Tan
  • Made in the USA
Select options This product has multiple variants. The options may be chosen on the product page
-28%
Add to compare

Open Box Cloud Defensive Light Control System for Streamlight ProTac Switch – LCSMK2

In stock

$50.19 – $64.87

The absolute best mounting solution for tape/pressure switches used to operate the Streamlight HLX ProTac Series Weaponlights. No more rubber bands. No more zip ties or wire or Velcro or duct tape. No more makeshift attachment methods that fail you. No more compromising with the light activation your life depends on.

  • The LCSmk2k features an “Early Exit” feature for the cables. This allows you to run the cable half-way through a given cable channel and then exit the bracket “early” if need more cable slack for a given setup.
  • The LCS Series Locks up 100% to your weapon. Zero movement. Zero play. Virtually indestructible.
  • Low-profile design with heavily radiused/chamfered edges ensure comfort and ergonomic function.
  • Weight with screws: 53 grams (1.9 oz)
  • Length: 3.5″
  • Width: 1.32″
  • Height: .575″ (switch sits .052″ above top edge of rail)
  • 100% MADE IN THE USA
Select options This product has multiple variants. The options may be chosen on the product page
-35%
Add to compare

Open Box Reptilia Black Hole Magwell for Glock 19 and Glock 23 GEN 3/4

In stock

$15.03 – $15.48

Molded from reinforced polymer, the Black Hole’s enlarged magazine well opening helps facilitate more efficient reloads without adding unnecessary bulk to your carry or duty sidearm

  • Compatible with 9mm & .40-caliber GLOCK pistols
  • Utilizes a unique rear spacer to ensure seamless fit and compatibility with both Gen 3 & Gen 4 frames
  • Impact-Modified Reinforced Nylon
  • Custom Alloy steel screw
  • 0.28 oz
  • Made in USA
  • Includes mounting screw and hex L-key
  • NOT compatible with OEM (factory) Glock 10 round magazines but is compatible with Magpul 10 round magazines.
Select options This product has multiple variants. The options may be chosen on the product page
-20%
Add to compare

Open Box Dead Air Armament Xeno Muzzle Brake – (1/2×28)

In stock

Original price was: $89.00.Current price is: $71.19.

The Xeno Brake is the next evolution to the Xeno Mounting System. This omni-directional brake has exceptional performance when running unsuppressed without disturbing everyone around you, but really shines when paired with the Xeno Adapter equipped suppressor.

  • Excellent suppressor host
  • Superb stand alone muzzle brake
  • Caliber: 5.56 / .223
  • Thread Pitch: 1/2×28
  • Material: 4140 steel
  • Finish: Black Nitride
Select options This product has multiple variants. The options may be chosen on the product page
-23%
Add to compare

Open Box Radian Raptor LT Sig MPX Ambidextrous Charging Handle

In stock

$69.22 – $84.41

Introducing the Raptor-LT Ambidextrous Charging Handle for SIG MPX™. The patented Raptor provides improved ergonomics and functionality compared to the factory variants. Its ambidextrous design allows rapid palm “blading” or finger-thumb charging of the weapon, ensuring the motion is fluid and fast from either the strong or support side.

  • Machined from 7075 aluminum, MILSPEC Type III hard-anodized.
  • Over-molded with high-strength, fiberglass-reinforced polymer for the ultimate combination of strength, weight, and durability.
  • The Raptor-LT is designed to match standard Magpul® color offerings.
  • Like all Radian products, the Raptor-LT comes with a limited lifetime warranty and is 100% designed and manufactured in the USA.
Select options This product has multiple variants. The options may be chosen on the product page
Load more products
Loading...