Used - Excellent Condition

• Precision machined from 6061 T6 Aluminum
• Hard coat anodized for a lifetime of performance
• Fully adjustable to fit both in spec and out of spec rail systems
• American Defense MFG, LLC. products feature a lifetime warranty
• Features the all-new Titanium QD Auto Lock™ Lever system
• Made with pride in the U.S.A.

The Patent Pending Arisaka Offset Picatinny Mount is a combination of our Offset Scount Mount and Picatinny adapter, and is meant for use with Picatinny based lights like the Surefire X300 or Inforce WML, plus other rail mounted accessories.

• Length: 1.77″
• Height: 0.20″ (at Surefire Scout Light mounting point)
• Weight: 1.0 oz
• The mount is CNC machined from 6061-T6 aluminum and MIL-A-8625 Type III hard coat anodized
• Requires a 5/64″ Allen wrench for installation (not included).
• Made in the USA

The Arisaka Low Profile Picatinny Rail is a 5 or 3 slot Picatinny rail for M-LOK handguard systems. It offers a reduced height to pull any Picatinny accessories closer to the handguard.

• Picatinny slots: 5 or 3
• Height over mounting surface: 0.277″
• Length: 2.15″ (5 slot), 1.37″ (3 slot)
• Weight: 0.7 oz (5 slot), 0.4 oz (3 slot)
• CNC machined from 6061-T6 aluminum and MIL-A-8625 Type III hard coat anodized.
• Requires an IP25/T25 Torx driver for installation (not included).
• Our M-LOK nuts are manufactured by Magpul.
• Made in the USA.

The Arisaka Side Scout Mount (SSM) is designed for use with Surefire Scout Lights, the Arisaka 300 and 600 Series, and the Streamlight Protac Rail Mount lights. It replaces the stock Picatinny rail adapter with a low profile mount that tucks the light underneath either side of the ATPIAL laser/illuminator series, including the ATPIAL-C, AN/PEQ15, and LA-5/PEQ. It will also allow the light to clear the QD lever on the Steiner DBAL I2, A3, and D2.

Light Compatibility:

• Surefire M300A. M300B, M300C, M600B, M600C, M600P, M600U, M600V, M600DF,
• Streamlight Protac Rail Mount 1, 2 and HL-X
• Arisaka 300 and 600 Series.

The best, most versatile, and strongest light mounts in the industry at the best price. The Cloud Defensive “Torrent series”. Manufactured for Cloud Defensive by Impact Weapons Components. In conjunction with Haley Strategic Partners.

• For use with the Cloud Defensive REIN and REIN Micro.
• Also compatible with all Surefire M300, M600 Scout, Streamlight Protac rail mount 1, 2 & HL-X and all replacement M300 and M600 bodies, including backbone and M-LOK® compliant rails.
• 3 light mounting positions provide .250” of lateral adjustment.
• The cantilevered mounting design shifts light forward of the mount, increasing usable rail space.
• Light offset optimized at a 45 degree offset for ergonomic activation.
• Ambidextrous with 6 total mounting solutions on 3 sided M-LOK® rail system.
• Low profile, lightweight, and does not impede weapons manipulation.

The ZEV Technologies PRO Plus Magwell was designed for the professional shooter that is looking to enhance the look and performance of their Gen 5 Glock. The one piece design facilitates easy installation and utilizes a single attachment screw to securely mount to the Glock frame while retaining a low profile.

• One piece 6061 aluminum design
• Type III anodized finish
• Kit includes Magwell body, mounting screw and wrench

Building on the proven MBUS Pro platform, the MBUS Pro Offset Sights are part of an an effective aiming system to supplement magnified optics on M1913 Picatinny mounting surfaces. In the event of a damaged or nonfunctional primary optic, or a close target, rotating the rifle 45 degrees provides the shooter with a fully-featured iron sighting solution.

• All steel construction
• Steel, rectangular sight post selectable between Match and Standard widths
• —.040” Match width for increased precision
• —.060” Standard width for maximum visibility
• Case hardened and finished with Melonite QPQ™ for extreme resistance to wear and corrosion
• Mounts on any MIL-STD-1913 Picatinny/STANAG 4694 rail including receiver-height gas blocks
• Elevation adjustment knob – no tools required
• Positive detents in both the up and down positions as well as on the elevation knob
• Standard AR height over bore when deployed, 45 deg. offset right-hand side
• *NOTE: All MBUS Pro Front Sights now come factory-equipped with the Enhanced Front Sight Post. There is no need to order one separately unless you are retrofitting an older MBUS Pro front sight. Enhanced Front Site Posts are not compatible with standard MBUS polymer sights.

Built on the proven MBUS Pro platform, the MBUS Pro Offset Sights are part of an an effective aiming system to supplement magnified optics on M1913 Picatinny mounting surfaces. In the event of a damaged or nonfunctional primary optic, or a close target, rotating the rifle 45 degrees provides the shooter with a fully-featured iron sighting solution.

• All steel construction
• Case hardened and finished with Melonite QPQ™ for extreme resistance to wear and corrosion
• Mounts on any MIL-STD-1913 Picatinny/STANAG 4694 rail
• Windage adjustable with low-profile knob – no tools required
• Positive detents in both the up and down positions
• Standard AR height over bore when deployed, 45 deg. offset right-hand side
• *NOTE: Only compatible with MBUS Pro OFFSET Front sight MAG525.

The MOE AK+ Grip combines reinforced polymer body construction with comfortable, wrap-around rubber overmolding for maximum weapon control in adverse environments.

• Rubber overmold on reinforced polymer construction
• Hard polymer bottom edge prevents snags and grip damage
• Grip counts as one US compliance part for 922(r).
• Storage core capability accepts optional cores
• Includes a basic grip cap, but accepts optional storage cores for customized gear stowage
• Designed to improve ergonomics and weapon control
• Drop-in upgrade for AKM/AK-47/AK-74/AK-101/AK-103 pistol grips*
• Fits both milled and stamped receivers, including those with grip reinforcement plates

A drop-in upgrade for AK-pattern pistol grips, the MOE AK Grip is designed to improve ergonomics and comes with an aggressive TSP texture for positive weapon control.

• Fits both milled and stamped receivers
• One-piece reinforced polymer construction
• Storage core capability accepts optional cores
• Aggressive tsp texture

Designed as a drop-in upgrade for the standard AR15/M4 pistol grip, The MOE-K Grip provides an extremely low profile and compact design with a steeper grip angle compared to more traditional styles. The more vertical grip angle is optimized for use on PDW (Personal Defense Weapon) configurations and improves comfort and control on short LOP rifles that bring the primary hand in closer to the shooter’s body. The thin profile and lack of backstrap ‘beavertail’ also makes it an excellent choice for shooters who prefer a smaller grip circumference. All mounting hardware included. Made in U.S.A.

• Replacement for AR15/M4 pistol-grip
• One-piece reinforced polymer construction
• More vertical grip angle than standard A2 grips
• Minimalist design provides for a compact and thin profile
• Aggressive TSP texture (Trapezoidal Surface Projections) for positive weapon control in all environments
• Specifications

The MOE-K2+ Grip combines reinforced polymer body construction with comfortable, wrap-around rubber overmolding for maximum weapon control in adverse environments. Similar in concept to the smaller MOE-K, the MOE-K2 is a drop in upgrade for AR15/M4’s that offers a more vertical grip angle, but in a full-size grip design. The steeper vertical grip angle is optimized for use on PDW (Personal Defense Weapon) configurations and improves comfort and control on short LOP rifles that bring the primary hand in closer to the shooter’s body. With the rubber overmolding for positive weapon control, compatibility with optional Storage Cores for gear stowage, and a unique backstrap design for proper trigger finger placement, the K2+ brings modern styling, ergonomics, and comfort to the AR platform. All mounting hardware and a basic grip cap included. Made in U.S.A.

• Replacement for AR15/M4 pistol-grip*
• One-piece reinforced polymer construction with wrap-around rubber overmolding
• More vertical grip angle than standard A2 grips
• Unique backstrap design for proper trigger finger placement
• Hard-polymer bottom edge to reduce equipment snags or grip damage
• Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage