Used - Excellent Condition

Open Box SB Tactical SBA3 Pistol Stabilizing Brace w/ 6 Position Milspec Receiver Extension (SBA3-01-SB)

Out of stock

Designed for all platforms capable of accepting a mil-spec carbine receiver extension, the SBA3 is 5-position adjustable, dramatically enhances versatility, and features a minimalist design with an integral, ambidextrous QD sling socket.

Minimalist design
5-position adjustable
Includes 7075 mil-spec carbine receiver extension
Integral, ambidextrous QD sling socket
ATF compliant, US veteran designed and proudly made in the USA
Product includes: brace, mil-spec carbine receiver extension, adjustable nylon strap

Select options

-2%

Open Box Bravo Company BCM Gunfighter Grip MOD 1

Out of stock

Upon introduction of the M16 in the 1960s the manual of arms for shooting positions included a bladed stance with an extended elbow on the fire control side. Because of numerous changes in the dynamics of the current fighting techniques we now virtually square off with the bad guy when engaging the target. The Gun Fighter’s Grip by BCM allows for a reduced angle and improved ergonomics when shooting in the modern gun fighting stances.

Reduced angle for improved ergonomics
Hinged trap door offering storage inside the grip with a water-resistant rubber gasket
Each grip includes both an extended modular insert to close the gap between the trigger guard and pistol grip, and a smooth modular insert for use with some rifles with larger built-in trigger guards. (user can decide which one to install)
Made in the USA and manufactured from high-quality impact resistant polymers.
Test fit to ensure proper function (may display attributes consistent with this QC process)

Select options

Open Box Bravo Company BCM Gunfighter Grip MOD 3

Out of stock

$19.92 – $21.87

Bravo Company’s BCM Gun Fighter’s Grip Mod 3 grip allows for a reduced angle and improved ergonomics when shooting in the modern gun fighting stances. The Mod 3 is up to a quarter of an inch wider than the BCMGUNFIGHTER Mod 0 and Mod 1 grips. Each grip features an extended forward tang to close the gap between the trigger guard and pistol grip” and a high rise “beavertail” style back strap. Made in the USA and manufactured from high-quality impact resistant polymers.

Reduced angle for improved ergonomics and trigger control
Hinged trap door offering storage inside the grip with a water-resistant rubber gasket
Each grip features an extended forward tang to close the gap between the trigger guard and pistol grip, and a high rise “beavertail” style back strap.
Up to a quarter of an inch wider than the BCMGUNFIGHTER Mod 0 and Mod 1 grips.
Made in the USA and manufactured from high-quality impact resistant polymers.
Each grip test fit to ensure proper function (may display attributes consistent with this QC process)

Select options

-2%

Open Box Bravo Company BCM Gunfighter Stock – Mod 0

Out of stock

Over a year in design, development, and testing. Bravo Company introduces the BCMGUNFIGHTER Stock. The strongest lightweight polymer stock available for your mil-spec receiver extension is here!

Snag free Design. No sharp edges prevent tangling of the rifle with the shooter’s sling, molle gear, or other kit.
Modular VBOST (Vehicle Borne Operations Sling Tab) – This tab interfaces with the shooter’s riggers’ band or bungee to secure the shooter’s sling against the stock when the carbine is not in use. Increasingly, this is the most common application when operating inside a vehicle.
2 different types of ambidextrous sling mounting options, including QD swivel sockets.
Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.
Available in Black, Flat Dark Earth, Foliage Green, and Wolf Gray.
United States Patent Number: 9,109,855

Select options

Open Box Mission First Tactical Battlelink Extreme Duty Minimalist Stock

Out of stock

MFT Battlelink™ Extreme Duty Minimalist Stock is built based on MFT’s popular Minimalist Stock platform. Recognizing the need for a more robust stock capable of withstanding long-term abuse delivered by larger caliber firearms such as tactical shotguns of 12 gauge or 7.62X51 AR-10 while remaining nimble enough for use on a 5.56.

Weight: 8.5oz.
Height: 4.85″
Width: 1.59″
Length: 7.71″
Slide-on replacement for collapsible buttstock.
Angled non-slip rubberized removable buttpad allows faster presentation.
Multiple Sling Slots with single point mount points.
Quick Detach Sling mounting point is positioned in the rear.
Upper section provides enhanced cheek weld.
A single MLOK connection point.
Modular Buffer Tube Plunger System, reinforced with a metal chassis.

Select options

-13%

Open Box Magpul MOE SL-S Carbine Stock (Mil-Spec)

Out of stock

The storage-capable version of the flagship Magpul MOE SL™ carbine stock, the MOE SL-S (Storage) Carbine Stock – Mil-Spec is a direct replacement buttstock for AR15/M4 carbines. The sleek profile, dual-side release latches, and waterproof battery tubes make it the slimmest storage tube stock available.

Waterproof storage
Enhanced cheek weld
Rubber butt-pad
Long-lasting adjustability
Rollover toe to fit gear
Made in the USA

Select options

-11%

Open Box Magpul MOE SL Carbine Stock (Mil-Spec) for AR15/M16

Out of stock

The MOE SL Stock – Mil-Spec Model (MOE Slim Line) is a drop-in replacement buttstock for AR15/M4 carbines using Mil-Spec sized receiver extension tubes. Designed for the modern battlefield, the sleek profile, dual-side release latches, rolled toe, and angled rubber butt-pad are optimized for use with body armor or modular gear and provides for efficient shoulder transitions.

Platform: AR-15, M4, M16, AR-10, LR-308, SR-25
Compatibility: Mil-Spec extension tube (not included)
Material: Polymer
LOP, M4 Collapsed ~10.8 in.
LOP, M4 Extended ~14.1 in.
LOP Adjustment Range 3.3 in.
Length, max 7.2 in.
Weight 9.6 oz.

Select options

-20%

Open Box Magpul MOE SL-K Carbine Stock (Mil-spec)

Out of stock

A drop-in replacement buttstock for AR15/M4 mil-spec carbine buffer tubes, the SL-K is designed for compact PDW style weapons or users desiring a small and light stock. Features a short and slim profile, a smaller rubber butt-pad with rolled toe for easy shouldering and sure grip, and a 1.25” footman’s loop with the ability to accept an optional M-LOK QD Sling Mount for push-button style QD sling swivels. A new, unique, ambidextrous release latch minimizes rattle on the receiver extension without requiring additional locks, levers, or springs*.

Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, LMT, Ruger, S&W, SIG, and others
Sloping cheek weld combines a slim profile with user comfort
Dual-side release latch provides easy adjustment while remaining anti-snag
Premium chrome-silicon lock spring provides positive locking and long service life
Compact rubber butt-pad offers an anti-slip surface and increases impact protection
Rollover on the toe allows for easier shoulder transitions and better fit when using body armor
Compatible with Magpul ASAP®, ASAP® QD, and other receiver-mount sling attachments
1.25” Footman’s Loop for sling mounting, and also accepts the M-LOK QD Sling Mount for push-button sling attachment (sold separately)
NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec and commercial-spec. The MOE SL-K will only fit with the common mil-spec tube.

Select options

-8%

Open Box Magpul MOE Carbine Stock (Mil-Spec) for AR15/M16

Out of stock

The MOE Carbine Stock – Mil-Spec model (Magpul Original Equipment) is a drop-in replacement buttstock for AR15/M16 carbines using Mil-Spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation. The Mil-Spec Model includes a standard 0.30″ thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.

Platform: AR10, AR15, M4, M16, M110, SR25
Compatibility: Mil-Spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, LMT, Ruger, S&W, SIG, and others
LOP, M4 Collapsed ~10.5 in.
LOP, M4 Extended ~13.8 in.
LOP Adjustment Range 3.3 in.
Length, max 6.9 in.
Weight 8.0 oz.
Weight, w/ receiver extension 12.0 oz.

Select options

-11%

Open Box Magpul CTR Carbine Stock (Mil-Spec) for AR15/M16

Out of stock

The Magpul CTR (Compact/Type Restricted) – Mil-Spec Model is a drop-in replacement buttstock for AR15/M16 carbines using mil-spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation. The CTR also features a supplemental friction lock system that minimizes excessive stock movement for enhanced weapon stability* and an ambidextrous QD sling mount that will accept any push-button sling swivel. The Mil-Spec Model includes a standard 0.30″ thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.

Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, Armalite, S&W, LMT, and others (please see the note below)
Supplemental friction lock minimizes accuracy robbing wobble*
Sloping cheek weld combines a slim profile with user comfort
Shielded release latch prevents snagging and accidental operation
Premium chrome-silicon lock spring provides positive locking and long service life
Side mounting slots accept optional cheek risers for NON AR15/M4 applications
Removable 0.30″ Rubber Butt-Pad offers an anti-slip surface and increases impact protection

Select options

-10%

Open Box Reptilia CQG Grip for AR-15/SR-25, SIG MPX/MCX & FN SCAR

Out of stock

The CQG grip has been specifically designed to enhance ergonomics and performance of compact sized short-barreled rifles, AR15 pistols, pistol caliber carbines, and PDWs. Compatible with the AR15/M16, AR10/SR25™, SIG MPX/MCX™, and FN SCAR ® platforms. It supports a wide range of hand sizes and weapon configurations, featuring a more pronounced vertical grip angle, anti-slip front and rear texture, and an enhanced beaver tail design; the CQG encourages the shooter’s hand to be positioned higher on the grip, for greater control and improved comfort.

Impact-Modified Reinforced Nylon
Fits AR15/AR10/SR25/MCX/FN SCAR 16 and 17 Pattern Hosts
77 grams
NSN: 1015-01-674-6753
MADE IN USA

Select options

-8%

Open Box Unity Tactical FAST Offset Optic Adapter Plate for LPVO Mount

Out of stock

The FAST™ LPVO Offset Optic Adapter Plates place mini red dot sights on the FAST™ LPVO Offset Optic Base. Each plate comes with a specific optic footprint and uses the optic manufacturer’s hardware. Each plate footprint will accept any mini red dot with that footprint pattern. Plates can mount in three positions on the Offset Optic Base (forward cantilever, centered, rearward cantilever) for a customized fit.

Exclusively compatible with the FAST™ LPVO Scope Mount and require a FAST™ Offset Optic Base to function.
Built from 7075-T6 Aluminum and Type III Hardcoat Anodized Black or FDE*.

Select options

-13%

Open Box Unity Tactical FUSION LightWing Adapter

Out of stock

$43.96 – $51.46

Designed specifically for the FUSION Micro Hub, the FUSION LightWing Adapter allows the user to mount both a backup iron sight and light in conjunction with the ATPIAL or ATPIAL-C Multi-Function Aiming Laser. The FUSION LightWing adapter is designed to extend the light out under the side of the ATPIAL while still mounting on the top rail. It is lightweight, low profile and compatible with a wide range of FUSION accessories. Mounting the unit behind the ATPIAL still allows access to the battery compartment without removing either unit.

Note: This part comes in both Left and Right side versions, however either side can be used ambidextrously depending on where the Micro Hub is placed. A Left Hand LightWing Adapter will put the light on the left side of the ATPIAL if the Micro Hub is mounted behind the ATPIAL. If the Micro Hub is mounted in front of the ATPIAL, a Left Hand ATPIAL Adapter can be reversed and used on the right side of the weapon.

Select options

-16%

Open Box Unity Tactical FUSION – Folding Backup Iron Sight

Out of stock

The Folding Backup Iron Sight is a lightweight folding front sight that seamlessly integrates into the Unity FUSION and VTAC Micro hubs.

For use with Fusion Micro Hub / Micro Hub 2.0
Material: 6061-T6 Aluminum
Finish: Type 3 Hardcoat Anodized

Select options

-10%

Open Box Troy Folding Rear Battle Sight

Out of stock

Durability and dead-on accuracy have made Troy Industries Folding Battle Sights the hands-down choice of Special Ops and tactical users worldwide. Easy to install and to deploy, with no levers or springs to fumble with, these sights position apertures at exact factory height. A stainless-steel cross-locking system ensures sights remain upright and zeroed under extreme combat conditions.

Flip up Sight Easily Deployed
.50 MOA Click Adjustments
Material: T6 Aircraft Grade Aluminum with stainless steel components
Finish: Mil-Spec hardcoat anodizing
Durable construction remains zeroed under extreme conditions
Made in USA

Select options

-14%

Open Box Midwest Industries Combat Rifle Sight – Rear

Out of stock

Rear Combat Iron Sight for the AR15/M4/M16 and other rifles platforms.

Super low profile .388″ centerline when folded down
Flips up to Mil-Spec height
Intermediate aperture for long-range precision and close-range rapid engagement
Dual locking detent springs for added reliability and crisp positioning
Constructed of phosphate finished ordnance grade steel
Hard coated 6061 aluminum base
Rifle .5 MOA / Carbine .65 MOA click adjustments
Weight 1.2oz

Select options

-14%

Open Box Midwest Industries Combat Rifle Sight – Front

Out of stock

Front Combat Iron Sight for the AR15/M4/M16 and other rifles platforms.

Low Profile .437″ when folded down, flips up to Mil-Spec sight heigh
Uses standard A2 front sight post
Dual locking detent springs for added reliability and crisp positioning
Constructed of ordnance grade phosphate finished steel
Hardcoated 6061 aluminum base
1.5 MOA per click adjustments
Weight 1.4oz

Select options

-35%

Open Box Midwest Industries Combat Rifle Sight Set – Front & Back

Out of stock

Front and Rear Combat Iron Sights for the AR15/M4/M16 Platform. Includes MI A2 Front Sight Tool.

Low profile when folded down, flips up to Mil-Spec sight height.
Uses standard A2 front sight post.
Weight (Front: 1.4oz) (Rear 1.2oz).
Hardcoated 6061 aluminum base.
Dual locking detent springs for added reliability and crisp positioning.
Constructed of phosphate finished ordnance grade steel.

Select options

-20%

Open Box ANR Design AIWB Holster for Glock 19 w/ X300

Out of stock

Carry and conceal your firearms comfortably with the ANR Design minimalistic KYDEX Holster design. Our KYDEX Appendix Inside the Waistband holsters provide you with full trigger guard protection and perfect retention. Utilizing a Concealment Claw, this holster is designed with the highest level of concealment in mind. All ANR Design holsters come suppressor sight ready up to 0.450″ tall.

Fits Glock 19 with SureFire X300

Select options

Open Box ANR Design AIWB Holster for Glock 19

Out of stock

Fits Glock 19

Select options

Open Box ANR Design AIWB Holster for Sig Sauer P365

Out of stock

Fits Sig Sauer P365

Select options

Open Box ANR Design AIWB Holster for Sig Sauer P320C

Out of stock

Fits Sig Sauer P320C

Select options

Open Box Wilson Combat SIG P320 Carry Grip Module – w/o Manual Safety

Out of stock

$69.80

The impressive modular capability of the SIG-SAUER P320 is why it has become a favorite with practical shooters and it’s thoroughly tested design will be the official US Military sidearm for many years to come. Wilson Combat has now reengineered the P320 grip frame to optimize its practical shooting potential. This all new molded polymer grip module will enhance your grip and improve recoil control.

Grip Frame: P320 Carry without manual safety
Colors: Black and Tan
Caliber: 9mm, .40 S&W, .357 SIG
Upgraded, high-cut 1911-style beavertail grip tang for smooth draws
Undercut front-strap and reshaped, radiused trigger guard for the highest grip possible
Enlarged, integrated magwell opening compatible with the latest generation SIG-SAUER X-series basepads
Improved grip traction and grip pattern with Starburst grip pattern and aggressive texturing on the front and backstrap
Frame reference serrations for support hand thumb or index finger positioning
Internal Slots for Rod-style Tungsten Weights
Angled “Holster Cuts” on light rail to aid in snag-free, re-holstering
Factory SIG-SAUER magazine release pre-installed
Compatible with all standard holsters

Select options

-28%

Open Box Safariland 7377 7TS ALS Concealment Belt Loop Holster for Glock 19

Out of stock

ALS (Automatic Locking System) secures the weapon once holstered. Simple straight-up draw once the release is deactivated.

Open-top design without SLS for quick retrieval of weapon.
Constructed of SafariSeven™, a proprietary nylon blend that is completely non-abrasive to a firearm’s finish.
Raised stand-off surfaces in the holster’s interior create air space around the weapon allowing dirt and moisture to quickly clear any contact with the firearm.
Very high heat and low cold tolerances; structurally sound from 300°F to -50°F.
The injection-molded belt loop is user adjustable for cant and can be worn cross draw.

Select options

Open Box Safariland 6390RDS ALS Mid-Ride Level 1 Retention Duty Holster

Out of stock

The 6390RDS holster is specifically designed for firearms with red dot sights mounted to them.

Low-ride belt loop that is 1.5″ lower than standard.
Rides close to the body.
Added suede lining to protect the gun’s sights and finish.
ALS® (Automatic Locking Systems) secures weapon once holstered; simple straight-up draw once the release is deactivated.
For use with red dot optic-equipped weapons.
SafariLaminate™ thermal-molded construction protects handgun and sights.
Suede lined to protect the handgun’s finish.
Made in the USA.

Select options

-13%

Open Box Aero Precision .750 Low Profile Adjustable Gas Block

Out of stock

The Aero Precision Adjustable Gas Block allows the user to finely tune their gas system for any application.

Standard low-profile design provides great fit under slim profile free float handguards including the Aero Precision ATLAS series of handguards
Adjustment screw is held in place by a spring and detent, providing repeatable audible “clicks” upon adjustment removing the need for secondary set screws that can come loose under recoil
Custom machined stainless steel adjustment screw provides 15 gas adjustment settings
Carbon fouling is channeled to a sacrificial chamber to help prevent carbon locking, as well as provide an access point for solvent in the event carbon locking does occur
The user-serviceable design allows for service and cleaning of the gas system
Specifications:
Machined from 4140 steel
Nitride coated
Compatible with barrels utilizing a .750 gas block journal.
Attaches to barrel via 10-32 x 3/16 knurled set screws
Includes:
Assembled Adjustable Gas Block
One 6″ 3/32 adjustment wrench for easy gas block adjustment underneath the installed handguard
Replacement spring and detent included

Select options

-16%

Open Box Aero Precision AR-15 Rifle Buffer Kit

Out of stock

The AR15 Rifle Buffer Kit is the perfect complement to your build. This kit features mil-spec components that are manufactured in the USA.

6061-T6 Aluminum Rifle Buffer Tube
AR15 Rifle Buffer
AR15 Rifle Buffer Spring
Kit Weight: 10.5 oz
Buffer Length: 6.0″
Buffer Weight: 5.0 oz.

Select options

Open Box Aero Precision Mil-Spec Carbine Buffer Tube for AR-15/M4

Out of stock

Aero Precision’s 6-position carbine buffer tube is constructed from 7075 aluminum. The 6-position adjustability allows the user to find the perfect placement for your adjustable stock.

Mil-spec Dimension 7075 Aluminum Buffer Tube.
6-position.
Made in the USA.
Platform: AR-15/M4.
Weight(s) 3.8 oz.
Other Features Buffer Length: 2.5″.

Select options

Open Box Aero Precision Ultralight 34mm Scope Mount – SPR

Out of stock

Aero’s Ultralight 34mm SPR Scope Mount features a rear ring that is pushed forward 2″, resulting in better eye relief. This scope mount is designed to fit AR type upper receivers with Mil-Spec 1913 Picatinny rails and features a cross-slot keyway that offers excellent recoil protection. Aero Precision Ultralight Scope Mounts free you from unnecessary bulk, providing one of the lightest mounts in the industry

Made In America
Material: 6061 T6 extruded aluminum construction
Scope Ring Size: 34mm
Scope Mount Profile: SPR
Weight: 4.1 oz
Designed for AR type upper receivers
Screw Torque: 15 in-lbs

Select options

Open Box Aero Precision Ultralight 30mm Scope Mount

Out of stock

Featuring a rigid, lightweight design, our Ultralight 30mm Scope Mount complements many high-end optic platforms. This scope mount is designed to fit AR type upper receivers with Mil-Spec 1913 Picatinny rails and features a cross-slot keyway that offers excellent recoil protection. The Ultralight Scope Mounts free you from unnecessary bulk, providing one of the lightest mounts in the industry.

Made In America
Finish Anodized
Material 6061 T6 extruded aluminum construction
Scope Ring Size 30mm
Scope Mount Profile Standard
Weight (oz) 3.27oz
Designed for AR type upper receivers
Screw Torque – 15 in-lbs

Select options

Open Box Wilson Combat Stripped Forged Upper Receiver for AR-15

Out of stock

$78.24

Wilson Combat’s receiver comes unmarked for a clean, custom look, with the same top-quality as the basis of Wilson Combat’s famous custom rifles.

Material: 7075-T6 forgings machined to Mil-Spec Plus tolerances
Finish: Mil-Spec Type 3 hard coat anodized finish
Mil-Spec Forged Upper Receiver with Picatinny top accessory/optic rail
M4 style feedramps
Stripped-No forward assist or ejection port cover installed
Approx. Weight: 7.0 Oz.
Forging Stamp May Vary

Select options

-16%