Color
- BlackBlack 60
- Flat Dark Earth (FDE)Flat Dark Earth (FDE) 20
MulticamMulticam 4
Multicam BlackMulticam Black 3- TanTan 1
- Clear AnodizedClear Anodized 3
- Tungsten GreyTungsten Grey 2
- GrayGray 1
- DDC (Desert Dirt Color)DDC (Desert Dirt Color) 3
- BrownBrown 1
- Foliage GreenFoliage Green 2
- OD GreenOD Green 3
- Urban GreyUrban Grey 2
- Wolf GreyWolf Grey 5
- Coyote BrownCoyote Brown 6
- Ranger GreenRanger Green 4
Multicam AridMulticam Arid 2
Multicam TropicMulticam Tropic 2
WoodlandWoodland 2
Used - Good Condition
Open Box Emissary Development Handbrake M-LOK
Out of stock
Price range: $15.04 through $30.43- Forward swept angle for enhanced ergonomics and ultimate control.
- Optimized size and tapered walls designed for maximum comfort.
- Proprietary texture for ideal grip.
- Anti-slip bottom ledge.
- Built-in front and rear barricade stop.
- Patent-pending.
Open Box Cloud Defensive Light Control System for Streamlight ProTac Switch – LCSMK2, Polymer
Out of stock
Price range: $32.19 through $34.99The LCSMK2J is the absolute best Polymer mounting solution for tape/pressure switches used to operate the Streamlight HLX ProTac Series Weaponlights.
- The LCSmk2j features an “Early Exit” feature for the cables. This allows you to run the cable halfway through a given cable channel and then exit the bracket “early” if need more cable slack for a given setup.
- The LCS Series Locks up 100% to your weapon. Zero movement. Zero play. Virtually indestructible.
- A low-profile design with heavily radiused/chamfered edges ensures comfort and ergonomic function.
- Length: 3.5″
- Width: 1.32″
- Height: .575″ (switch sits .052″ above the top edge of rail)
- 100% MADE IN THE USA
Open Box Rosco Manufacturing 16″ M4 5.56 NATO Bloodline Mid-Length Barrel (1/7 Twist)
Out of stock
$124.02
Open Box VLTOR EMOD Mil-Spec Stock Kit for AR-15
Out of stock
Original price was: $179.95.$166.41Current price is: $166.41.The VLTOR EMOD provides a variety of enhancements in comparison to other stocks. The increased length is a major benefit for those weapons using scoped rifles, as it increases the available comb for any length of pull.
- Kit includes five position Mil-Spec receiver extension , carbine spring and buffer kit, VLTOR Lock Plate and VLTOR Lock Nut
- Waterproof side battery compartments that holds 4 CR123 or three AA batteries in each compartment
- Weatherproof compartment in the clubfoot area of the stock that hold two AA batteries
- Comes pre-assembled with rubber buttpad and strike plate
- Finish: Matte (anti-reflection/anti-glare)
- Impact and temperature resistant polymer, specifically blended for VLTOR stocks
- Has standard military and quick disconnect swivel socket accessible from both sides
- Slightly wider and longer at the toe than a regular M4 stock with a noticeable negative pitch making transitions from the ready position feel more natural
Open Box Bravo Company BCM Low Profile Gas Block for .625 Barrels
Out of stock
Original price was: $50.00.$47.05Current price is: $47.05.BCM® Low Profile Gas Block for AR15, M16, M4, M4A1.
- Machined of steel, phosphate finish, for .625 barrels.
- Manufactured within very tight Mil-Spec tolerances on all ID’s.
- Barrel ID honed after finish per USGI TDP.
- Made by Bravo Company MFG, Inc. with set screw mounting.
- Set Screws are Steel 10-32 x 3/16 Knurled Cup Point
Open Box Eagle Industries Single FB-Style M4 Magazine Pouch
Out of stock
$37.72The Eagle Industries FB Style Single M4 Magazine Pouches are a structured rifle magazine pouch for reliable insertion and extraction. The mag pouch is constructed of MIL-SPEC 500 denier nylon. The FB style thermo-plastic insert holds pouch shape for easy insertion and extraction. Features an open top with bungee retention and is MOLLE compatible. Fits 1 M4 Magazine.
- FB style thermo-plastic insert holds pouch shape for easy insertion and extraction.
- Open top with bungee retention.
- MOLLE compatible.
Open Box Esstac 5.56 Single Midlength KYWI Pouch
Out of stock
Price range: $16.54 through $22.68With A straight forward, user friendly and highly intuitive design the single KYWI mag pouch is like no other. Utilizing a hybrid kydex and nylon design, you get all the rigidity you would expect from a kydex pouch and the lack of noise you want from a nylon pouch. These pouches feature a kydex wedge insert (KYWI) that provide the needed retention to secure your magazines without the need for bungee cord for rapid mag changes.
- This pouch is made for STANAG magazines: AR15/M4 style magazines
- AK magazines will NOT fit in this pouch
- Kydex wedge insert (KYWI) provides retention
- Pouch is 4.25″ tall
- Requires mounting hardware
Open Box Esstac 5.56 Single KYWI Shorty Pouch
Out of stock
Price range: $20.05 through $21.95With A straight forward, user friendly and highly intuitive design the single KYWI mag pouch is like no other. Utilizing a hybrid kydex and nylon design, you get all the rigidity you would expect from a kydex pouch and the lack of noise you want from a nylon pouch. These pouches feature a kydex wedge insert (KYWI) that provide the needed retention to secure your magazines without the need for bungee cord for rapid mag changes.
- This pouch is made for STANAG magazines: AR15/M4 style magazines
- AK magazines will NOT fit in this pouch
- Kydex wedge insert (KYWI) provides retention
- Hybrid kydex and nylon design
- Pouch is 3.5″ tall
- Requires mounting hardware
Open Box Esstac 5.56 Triple Tall KYWI Pouch
Out of stock
Price range: $28.90 through $54.88With A straight forward, user friendly and highly intuitive design the single KYWI mag pouch is like no other. Utilizing a hybrid kydex and nylon design, you get all the rigidity you would expect from a kydex pouch and the lack of noise you want from a nylon pouch. These pouches feature a kydex wedge insert (KYWI) that provide the needed retention to secure your magazines without the need for bungee cord for rapid mag changes.
- This pouch is made for STANAG magazines: AR15/M4 style magazines
- AK magazines will NOT fit in this pouch
- Hybrid kydex and nylon design
- Size: 5.25″ Tall x 9.25″ wide
- Requires mounting hardware
Open Box Spiritus Systems 5.56/.223 Rifle Magazine Insert – Single
Out of stock
$22.15The 5.56 Rifle Single Insert is a custom insert that allows you to plus-up magazines one by one.
- Easy access to your magazines while providing excellent retention.
- Fits into either pocket on the Micro Fight Chassis MK 3.
- Quiet when removing or adding magazines.
Open Box Spiritus Systems Placard 5.56 X .45
Out of stock
Original price was: $59.95.$56.28Current price is: $56.28.The LV Placard was designed to give users superior retention of magazines and other mission-critical equipment.
- Attach the included ITW Nexus hardware to turn your placard into a Nano-sized chest rig.
- The back of the placard is fully lined with a hard loop field for secure fitment to your plate carrier.
- The elastic creates form-fitting cells that can hold a variety of different items.
- Elastic allows it to expand to accommodate large or oddly shaped pieces of equipment.
- Features webbing at the base of the system instead of sewing it completely shut.
- Laminate loops on the outside of each cell to allow for the attachment of retention loops.
Open Box B5 Systems Trigger Guard
Out of stock
Original price was: $22.00.$19.15Current price is: $19.15.The best guard for big hands and gloved shooting. Especially in cold weather or tactical operations, you’ll need to upgrade for more room around the trigger. The B5 curved trigger guard is designed to accommodate gloved shooting, and even maintains the original swing-down feature for use with heavier winter gloves.
- Made of 6061 aluminum
- Milspec Type III anodized finish
- Drop-in upgrade
- Weight: 3.00 Ounces
- Width: 2.10 (in)
- Height: 0.53 (in)
Open Box Arisaka Defense QD Mount for M-LOK – Quick Detach Sling Swivel Mount
Out of stock
Original price was: $23.00.$22.20Current price is: $22.20.The Arisaka Quick Detach (QD) Mount is a low profile design for M-Lok hand-guards. It features an anti-rotation interface and accepts all standard QD sling swivels, as well as the Geissele/ALG Defense forged QD sling swivel.
- Height: 0.375″
- Weight: 0.3 oz
- CNC machined from 6061-T6 aluminum
- MIL-A-8625 Type III hard coat anodized
- Requires a 5/32″ Allen wrench for installation (not included).
- Made in the USA.
Open Box Arisaka Defense Side Scout Mount M-LOK (SSM-M)
In stock
Original price was: $37.00.$33.17Current price is: $33.17.The Arisaka Side Scout Mount (SSM) is designed for use with Surefire Scout Lights, the Arisaka 300 and 600 Series, and the Streamlight Protac Rail Mount lights. It replaces the stock Picatinny rail adapter with a low profile mount for M-Lok handguards, and tucks the light underneath either side of the ATPIAL laser/illuminator series, including the ATPIAL-C, AN/PEQ15, and LA-5/PEQ. It will also allow the light to clear the QD lever on the Steiner DBAL I2, A3, and D2.
Open Box Arisaka Defense Vertical Grip for M-LOK Handguards
Out of stock
Original price was: $35.00.$27.07Current price is: $27.07.The Arisaka Vertical Grip is a robust, minimal grip for M-Lok handguards. It features a radiused profile at the top which tapers to meet the mounting surface on the handguard, giving a low-profile feel and ergonomic comfort. Twin mounting screws ensure secure attachment. The grip is hollow, with no end-cap.
- Height: 2.50”
- Width: 1.30”
- Weight: 1.80oz
- CNC machined from 6061-T6 aluminum and MIL-A-8625 Type III hard coat anodized
- Requires a 3/32” Allen wrench for installation (not included)
- Made in the USA
Open Box Arisaka Defense Low Profile Finger Stop – Picatinny
Out of stock
Original price was: $25.00.$23.41Current price is: $23.41.The Arisaka Finger Stop was developed as a low profile, minimal control accessory. This version is for 1913 Picatinny rails. It has a slim profile which is ergonomically designed to be located between your index and middle fingers. This typically places it further forward on the handguard, which means it doesn’t get in the way when transitioning to kneeling or prone shooting positions, where most people move their support hand towards the rear.
- Height: 0.75” above 1913 Picatinny rail
- Width: 0.68″
- Weight: 0.4 oz
- CNC machined from 6061-T6 aluminum
- MIL-A-8625 Type III hard coat anodized
- Requires a 3/32″ Allen wrench for installation (not included)
- Made in the USA.
Open Box Arisaka Defense Aimpoint Micro Mount – 1.93″ Height
Out of stock
Original price was: $109.00.$89.27Current price is: $89.27.The Arisaka Aimpoint Micro Mount is designed for the Aimpoint Micro T1 and T2 optics, and will also function with other red dots using the same footprint.
- Material: CNC machined from 7075-T6 aluminum.
- Finish: Type III hard-coat anodizing.
- Weight (including screws): 3.1 oz
- Picatinny clamp – 50 inch-lbs (5.7 Nm)
- Made in the USA
Open Box Arisaka Defense Low Profile Picatinny Rail – KeyMod
Out of stock
Price range: $18.79 through $28.29The Arisaka Low Profile Picatinny Rail is a 5 or 3 slot Picatinny rail for KeyMod handguard systems. It offers a reduced height to pull any Picatinny accessories closer to the handguard.
- Picatinny slots: 5 or 3
- Height over mounting surface: 0.277″
- Length: 2.15″ (5 slot), 1.37″ (3 slot)
- Weight: 0.6 oz (5 slot), 0.4 oz (3 slot)
- CNC machined from 6061-T6 aluminum and MIL-A-8625 Type III hard coat anodized.
- Requires a T15 Torx wrench for installation (not included).
- BCM KeyMod screws are covered under US Patent 9377274.
- Made in the USA.
Open Box Arisaka Defense Offset Scout Mount – M-LOK
Out of stock
Price range: $38.05 through $41.71The Patent Pending Arisaka Offset Scout Mount is designed specifically for the Surefire Scout Light M600 and M300 series weapon lights, the Modlite PLH and OKW weapon lights, the Arisaka 300 and 600 Series Lights, the Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser), and Olight Odin. It replaces the stock Picatinny rail adapter with a low profile mount for M-Lok handguards. The Offset Scout Mount is very low profile at less than 0.20″ thick.
- Weight: 0.4 oz
- Length: 1.265”
- CNC machined from 6061-T6 aluminum
- MIL-A-8625 Type III hard coat anodized.
- Requires an IP25/T25 and IP20/T20 Torx driver for installation (not included)
- M620 series lights can also be used with the Offset Scout Mount with the addition of the Arisaka Offset M620 Adapter.
- Includes necessary screws to attach light body to mount.
- Made in the USA.
Open Box Arisaka Defense Side Scout Mount KeyMod (SSM-K)
In stock
Price range: $25.44 through $39.27The Arisaka Side Scout Mount (SSM-K) for KeyMod rails is designed for use with Surefire Scout Lights, the Arisaka 300 and 600 Series, and the Streamlight Protac Rail Mount lights. It replaces the stock Picatinny rail adapter with a low profile mount for M-Lok handguards, and tucks the light underneath either side of the ATPIAL laser/illuminator series, including the ATPIAL-C, AN/PEQ15, and LA-5/PEQ. It will also allow the light to clear the QD lever on the Steiner DBAL I2, A3, and D2.
- Length: 1.265″
- Thickness: 0.2″
- Weight: 0.6 oz
- CNC machined from 6061-T6 aluminum
- MIL-A-8625 Type III hard coat anodized.
- Includes necessary screws to attach light body to mount.
- Requires a T15 and IP20/T20 Torx driver for installation (not included).
Open Box Arisaka Defense Inline Scout Mount – M-LOK
In stock
$33.17The Patented Arisaka Inline Scout Mount is designed specifically for the Surefire Scout Light M600 and M300 series weapon lights, the Arisaka 300 and 600 Series Lights, and the Streamlight Protac Rail Mount 1, 2, and HL-X. It replaces the stock Picatinny rail adapter with a low-profile mount for M-Lok handguards. The mount is especially useful on handguards that feature 45-degree angle mounting flats, such as the BCM MCMR, Geissele Automatics SMR MK4 and MK8, Daniel Defense MFR, KAC URX4, ALG Defense EMR, MI Gen 3, Mega MML, and Mega/Hodge Wedge Lock.
- Length: 3.0”
- Height: 0.20″ (at Surefire Scout Light mounting point)
- Weight: 0.6 oz
- Material: 7075-T6 aluminum
- Finish: Type III Hard Coat Anodized Black, FDE, and Tan
- Made in the USA
Open Box Arisaka Defense Inline Scout Mount – KeyMod
Out of stock
Original price was: $37.00.$33.17Current price is: $33.17.The Patented Arisaka Inline Scout Mount is designed specifically for the Surefire Scout Light M600 and M300 series weapon lights, the Arisaka 300 and 600 Series Lights, and the Streamlight Protac Rail Mount 1 and 2. It replaces the stock Picatinny rail adapter with a low profile mount for KeyMod handguards.
- Length: 3.0”.
- Height: 0.20″ (at Surefire Scout Light mounting point).
- Weight: 0.5 oz.
- Material: CNC machined from 7075-T6 aluminum.
- Finish: MIL-A-8625 Type III hard coat anodized.
- BCM KeyMod screws are covered under US Patent 9377274.
- Includes necessary screws to attach light body to mount.
- Made in the USA.
Open Box Cloud Defensive KeyMod Light Control System, Mount for SureFire ST07 Tape Switch – LCSmk1-d
Out of stock
Original price was: $69.99.$64.87Current price is: $64.87.- Unique Patented design utilizes a slot that ensures a snug, perfect friction-fit for the tape switch. Once installed its not coming out unless you want it to.
- Precision CNC machined from Certified 6061 aluminum for superior strength.
- Proprietary dual cable control channels machined into the one-piece mount.
- Proprietary “Early Cable Exit” machined into each cable control channel. This allows you to only use part of the cable control channel should you need more slack in the cable to span across the handguard, et.
- 100% MADE IN THE USA
Open Box Cloud Defensive Light Control System for Streamlight ProTac Switch – LCSMK2
In stock
Price range: $50.19 through $64.87The absolute best mounting solution for tape/pressure switches used to operate the Streamlight HLX ProTac Series Weaponlights. No more rubber bands. No more zip ties or wire or Velcro or duct tape. No more makeshift attachment methods that fail you. No more compromising with the light activation your life depends on.
- The LCSmk2k features an “Early Exit” feature for the cables. This allows you to run the cable half-way through a given cable channel and then exit the bracket “early” if need more cable slack for a given setup.
- The LCS Series Locks up 100% to your weapon. Zero movement. Zero play. Virtually indestructible.
- Low-profile design with heavily radiused/chamfered edges ensure comfort and ergonomic function.
- Weight with screws: 53 grams (1.9 oz)
- Length: 3.5″
- Width: 1.32″
- Height: .575″ (switch sits .052″ above top edge of rail)
- 100% MADE IN THE USA
Open Box Magpul MOE-K Grip for AR-15, M4
Out of stock
Price range: $19.13 through $20.63Designed as a drop-in upgrade for the standard AR15/M4 pistol grip, The MOE-K Grip provides an extremely low profile and compact design with a steeper grip angle compared to more traditional styles. The more vertical grip angle is optimized for use on PDW (Personal Defense Weapon) configurations and improves comfort and control on short LOP rifles that bring the primary hand in closer to the shooter’s body. The thin profile and lack of backstrap ‘beavertail’ also makes it an excellent choice for shooters who prefer a smaller grip circumference. All mounting hardware included. Made in U.S.A.
- Replacement for AR15/M4 pistol-grip
- One-piece reinforced polymer construction
- More vertical grip angle than standard A2 grips
- Minimalist design provides for a compact and thin profile
- Aggressive TSP texture (Trapezoidal Surface Projections) for positive weapon control in all environments
- Specifications
Open Box Magpul MOE-K2 Grip for AR-15, M4
Out of stock
Price range: $19.18 through $19.93Similar in concept to the MOE-K, the MOE-K2 is a drop in upgrade for AR15/M4’s that offers a more vertical grip angle, but in a full-size grip design. The steeper vertical grip angle is optimized for use on PDW (Personal Defense Weapon) configurations and improves comfort and control on short LOP rifles that bring the primary hand in closer to the shooter’s body. With an aggressive TSP texture for positive weapon control, compatibility with optional Storage Cores for gear stowage, and a unique backstrap design for proper trigger finger placement, the K2 brings modern styling and ergonomics to the AR platform. All mounting hardware and a basic grip cap included.
- Replacement for AR15/M4 pistol-grip*
- One-piece reinforced polymer construction
- More vertical grip angle than standard A2 grips
- Unique backstrap design for proper trigger finger placement
- Aggressive TSP texture (Trapezoidal Surface Projections) for positive weapon control in all environments
- Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage
- Made in U.S.A.
Open Box Bravo Company BCM Gunfighter Grip MOD 3
Out of stock
Price range: $19.92 through $21.87Bravo Company’s BCM Gun Fighter’s Grip Mod 3 grip allows for a reduced angle and improved ergonomics when shooting in the modern gun fighting stances. The Mod 3 is up to a quarter of an inch wider than the BCMGUNFIGHTER Mod 0 and Mod 1 grips. Each grip features an extended forward tang to close the gap between the trigger guard and pistol grip” and a high rise “beavertail” style back strap. Made in the USA and manufactured from high-quality impact resistant polymers.
- Reduced angle for improved ergonomics and trigger control
- Hinged trap door offering storage inside the grip with a water-resistant rubber gasket
- Each grip features an extended forward tang to close the gap between the trigger guard and pistol grip, and a high rise “beavertail” style back strap.
- Up to a quarter of an inch wider than the BCMGUNFIGHTER Mod 0 and Mod 1 grips.
- Made in the USA and manufactured from high-quality impact resistant polymers.
- Each grip test fit to ensure proper function (may display attributes consistent with this QC process)
Open Box KynSHOT AR-15 Carbine Buffer – RB5000L
Out of stock
Original price was: $149.99.$131.34Current price is: $131.34.RB5000L KynSHOT Marksman Recoil Buffer is identical in form to RB5000 but designed to work in AR15 .223 / 5.56 platforms with lower power ammunition including 300 Blackout and other subsonic rounds.
- Designed for 5.56mm/.223 cal. AR-15 with a collapsible stock (300 Blackout and other subsonic rounds)
- Drop-In Replacement
- Reduce felt recoil
- Improve reliability
- Reduce bolt carrier speed
- Reduce wear on parts
- Reduce shock and vibration to optics
- Suppress bolt bounce
- Decrease sight movement
- Smoother operation
- Faster shot recovery time
- Military-grade materials and manufacturing
Open Box Aero Precision Enhanced Carbine Buffer Tube for AR-15/AR-10
Out of stock
Original price was: $39.99.$36.82Current price is: $36.82.Aero took a whole new approach when designing their Enhanced Carbine Buffer Tube by including features like carrier support extensions, position guide drain holes, and ramping the design of the tube.
- Material: 7075-T6 Aluminum
- Fully supports and guides the bolt carrier group into the buffer tube after a round is fired, preventing carrier tilt and unnecessary wear on key components.
- Ramped Tube Design allows for effortless installation of traditional carbine stocks.
- Simply hold down the adjustment piece and push your stock onto the Enhanced Buffer Tube.
- These features add reliability, security, and simplicity that traditional mil-spec buffer tube options historically overlook.
Open Box Aero Precision Ultralight 30mm Scope Mount – SPR
Out of stock
Original price was: $109.99.$84.50Current price is: $84.50.The Ultralight 30mm SPR Scope Mount features a rear ring that is pushed forward 2″, resulting in better eye relief. This scope mount is designed to fit AR type upper receivers with Mil-Spec 1913 Picatinny rails and features a cross-slot keyway that offers excellent recoil protection. Ultralight Scope Mounts free you from unnecessary bulk, providing one of the lightest mounts in the industry.
- Made In America
- Finish Anodized
- Material 6061 T6 extruded aluminum construction
- Scope Ring Size 30mm
- Scope Mount Profile SPR
- Weight (oz) 3.36oz
- Screw Torque – 15 in-lbs
Open Box Wilson Combat Stripped Forged Upper Receiver for AR-15
Out of stock
$78.24Wilson Combat’s receiver comes unmarked for a clean, custom look, with the same top-quality as the basis of Wilson Combat’s famous custom rifles.
- Material: 7075-T6 forgings machined to Mil-Spec Plus tolerances
- Finish: Mil-Spec Type 3 hard coat anodized finish
- Mil-Spec Forged Upper Receiver with Picatinny top accessory/optic rail
- M4 style feedramps
- Stripped-No forward assist or ejection port cover installed
- Approx. Weight: 7.0 Oz.
- Forging Stamp May Vary
Open Box Grey Ghost Precision Stripped Forged Upper Receiver
Out of stock
Price range: $86.69 through $102.83Finally, you can grab what GGP considers the best forged upper in the industry, and it is a perfect companion for your GGP Cornerstone Lower receiver.
- Material: Machined from forged 7075-T6 Aluminum.
- Finish: Black Hard anodized with a surface hardness of 60 Rockwell.
- M4 Feedramps.
- .250″ Takedown pin holes.
- Engraved T-marks.
- Compatability: Functions with nearly all available AR-15 parts kits and lowers.
- Match with GGB’s Cornerstone lower receiver for a solid and dependable fit.
- Stripped Receiver DOES NOT include port door, forward assist, or any small parts.
- Weight: 0.4 lbs.