Used - Good Condition

Add to compare

Open Box Elite Tactical Systems Magazine Loader for Pistol Mags – (45ACP)

In stock

$25.43

The ETS Mag Loader is the fastest loader ever, load your .45 caliber mags in under 10 seconds!

  • Fastest Loader Ever – Load your .45 caliber mags in under 10 seconds!
  • Universal loader works with virtually all brands of pistol magazines, double or single stack.
  • Load magazine directly from ammo tray or with loose ammo.
  • Loader does NOT damage feed lips.
  • Portable and compact. Easily fits in your range bag or pocket.
  • Made in the USA and comes with a Lifetime warranty.
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Open Box Dead Air Armament Xeno Flash Hider – (5/8×24)

In stock

$59.99
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Open Box Killer Innovations Velocity Glock Compensator

In stock

$75.69 – $92.30

Killer Innovation’s Velocity Glock Compensator is “braking” all the rules! This compensator significantly reduces recoil and muzzle climb and attaches in an innovative new way that is completely different than any other compensator on the market. This revolutionary attachment system has a few advantages over the traditional methods.

Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Open Box Cloud Defensive Light Control System for Streamlight ProTac Switch – LCSMK2, Polymer

In stock

$32.19 – $34.99

The LCSMK2J is the absolute best Polymer mounting solution for tape/pressure switches used to operate the Streamlight HLX ProTac Series Weaponlights.

  • The LCSmk2j features an “Early Exit” feature for the cables. This allows you to run the cable halfway through a given cable channel and then exit the bracket “early” if need more cable slack for a given setup.
  • The LCS Series Locks up 100% to your weapon. Zero movement. Zero play. Virtually indestructible.
  • A low-profile design with heavily radiused/chamfered edges ensures comfort and ergonomic function.
  • Length: 3.5″
  • Width: 1.32″
  • Height: .575″ (switch sits .052″ above the top edge of rail)
  • 100% MADE IN THE USA
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Open Box Blue Force Gear HK Style 1″ Sling Snap Hook

In stock

$9.68

Blue Force Gear Sling Snap Hooks are fast, secure sling attachment hardware that allows quick installation and removal of any sling they are attached too. The Sling Snap Hook has a 1″ sling slot and fits on any Padded or unpadded Vickers Combat Applications Sling. As with all Blue Force Gear, it is made with excellence in the USA and carries a limited lifetime warranty.

  • Sling Snap Hooks are best suited for smaller sling eyelets found on H&K weapons, SCARs, SIGs, or other smaller eyelets.
  • ***Not recommended for elongated AK eyelets as they may accidentally disengage if rotated at the appropriate angle. A better option for front eyelets on AKs are the Universal Wire Loops™ or MASH Hooks ***
  • Sizing: 1″ Sling Loop (Use on 1″ or 1.25″ sling webbing)
  • Build: Finished steel
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Open Box Shockwave Technologies Raptor F1 Forend for Mossberg 500/590

In stock

$21.14 – $21.56

The Shockwave Technologies Raptor F1 Forend is Made in America. With its enhanced texture, you gain a great hold on your firearm. Its glass-filled polymer construction is virtually indestructible. When you want to turn up your shotgun’s badass factor up to 11, reach for the Shockwave Raptor F1 forend. Cutting-edge design meets improved handling and fast target acquisition. A bolt-on replacement for your factory or aftermarket forend, the Shockwave F1 is available as a standalone forend, with an optional upper heat shield, and an optional forend installation tool— or any combination thereof.

  • Rugged glass-reinforced polymer
  • Lightweight
  • Extra length lets you personalize forward handhold
  • Ribbed inset area provides secure gripping
  • Front and rear handstops improve safety
  • A total of 10 M-LOK® slots for mounting lights, vertical grips, angled grips, Picatinny rails, and more
  • Optional upper heat shield prevents burns and offers rifle sights for fast target acquisition
  • Optional forend wrench simplifies and speeds installation
  • Compatible with Mossberg 500/590 12-gauge firearms
  • Veteran designed
  • Made in U.S.A.
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Open Box CMC Remington 700 Ultra Adjustable Precision Drop In Trigger – Curve Bow

In stock

$155.72

CMC Remington 700 Adjustable Ultra Precision Trigger was designed with the goal of creating a Remington 700 trigger with the performance characteristics and ergonomics of CMC’s field-proven AR triggers, an extremely reliable safety mechanism, and easily accessible pull weight adjustment. Unique safety design locks all active trigger components solidly providing a generous margin of safety under all conditions. The CMC Remington 700 Adjustable Ultra Precision Trigger allows adjustment of the pull weight without uninstalling the action from the stock. Factory weight is preset to 2.5lbs and is adjustable to accommodate a wide range of shooting conditions and shooter preferences with no disassembly required.

  • Integrated self-contained design
  • Easy to Install
  • Zero Over Travel & Zero Creep
  • O. C. D. Locking System™
  • Adjustable trigger weight by user whilst installed in rifle
  • Adjustability Range is 8oz – 3.5lbs – comes factory at 2.5lbs
  • Made from 7070 T6 Aluminum and S7 Tool Steel
  • CMC Triggers Lifetime Warranty
  • Made in the USA in the Great State of Texas
  • Patent Pending O.C.D. Locking System™
Select options This product has multiple variants. The options may be chosen on the product page
-23%
Add to compare

Open Box Elite Tactical Systems Magazine Loader for Pistol Mags – (.380)

In stock

Original price was: $27.95.Current price is: $21.49.

The ETS Pistol Mag Loader is the fastest loader ever. Load your .380 caliber mags in under 10 seconds!

  • Fastest Loader Ever – Load your .380 caliber mags in under 10 seconds!
  • Universal loader works with virtually all brands of pistol magazines, double or single stack.
  • Load magazine directly from ammo tray or with loose ammo.
  • Loader does NOT damage feed lips.
  • Portable and compact. Easily fits in your range bag or pocket.
  • Made in the USA and comes with a Lifetime warranty.
Select options This product has multiple variants. The options may be chosen on the product page
-19%
Add to compare

Open Box Raine Shooters Armband Tactical Sleeve

In stock

$24.27 – $26.26

Raine Inc Shooters Armband (QB Tactical Sleeve).

  • Perfect for competition shooters and athletes
  • Shooters can use to hold dope cards and measurements
  • Quarterbacks can utilize three windows to display play sheets
  • Front Window: 5” X 2.75”
  • Larger Interior Window: 5.5” X 2.75”
  • Smaller Interior Window: 4.75″ X 2.75″
Select options This product has multiple variants. The options may be chosen on the product page
-37%
Add to compare

Open Box RS Regulate GAR-10M-R Galil ACE M-LOK Rail

In stock

$145.04 – $159.20

The GAR-10M-R is a 10 inch drop in M-LOK rail for Gen 1 Galil ACE rifles with a single long cross-bolt handguard.

  • Mounts similarly to the factory handguards
  • M-LOK slots for optimized accessory attachment
  • Material: Aircraft grade aluminum
  • Finish: Black Type 3 Mil-Spec Hard Anodized
Select options This product has multiple variants. The options may be chosen on the product page
-27%
Add to compare

Open Box Spiritus Systems MOLLE TUBES Cummerbund

In stock

$65.37 – $110.73

The TUBES™ MOLLE Cummerbund was designed to be a lightweight and simple load carriage solution for the LV/119 series of vests.

  • Features the officially licensed First Spear TUBES™ Attachments systems.
  • Utilize any MOLLE accessory for an almost infinite amount of configurations for mission needs.
  • The TUBES™ is a great option for those who are in and out of their vest frequently and have experienced wear and tear on their Hook/Loop attachment vests.
  • The cummerbund attaches inside the plate bag.
  • The design creates a smooth profile when worn underneath clothing.
Select options This product has multiple variants. The options may be chosen on the product page
-43%
Add to compare

Open Box Shockwave Technologies Raptor Grip for Mossberg 500 – Stealth Grey

In stock

Original price was: $29.95.Current price is: $17.20.

The Shockwave Technologies Raptor Grip is Made in America. With its enhanced texture, you gain a great hold on your weapon. Its glass-filled polymer construction is virtually indestructible.

This is a new style of bird’s head grip (aka birdshead grip aka witness protection grip aka chicken head grip aka border patrol grip aka entry-style grip aka bad ass grip) developed and manufactured by Shockwave Technologies, LLC in the U.S.A.

  • Unique angle of the Raptor Grip minimizes felt recoil, allowing maximum control shot after shot. It also just looks badass. Yes, mounting hardware and bolt hole plug are included. (Requires a 1/4″ hex wrench for installation, not included.)
  • Fits a variety of 12g and 20g shotguns
  • This is the 2nd generation model, includes bolt and bolt plug
  • Available in Black, Flat Dark Earth, Stealth Grey and OD Green.
Select options This product has multiple variants. The options may be chosen on the product page
-43%
Add to compare

Open Box Shockwave Technologies Raptor Grip for Mossberg 500

In stock

$17.07 – $17.20

The Shockwave Technologies Raptor Grip is Made in America. With its enhanced texture, you gain a great hold on your weapon. Its glass-filled polymer construction is virtually indestructible.

This is a new style of bird’s head grip (aka birdshead grip aka witness protection grip aka chicken head grip aka border patrol grip aka entry-style grip aka bad ass grip) developed and manufactured by Shockwave Technologies, LLC in the U.S.A.

  • Unique angle of the Raptor Grip minimizes felt recoil, allowing maximum control shot after shot. It also just looks badass. Yes, mounting hardware and bolt hole plug are included. (Requires a 1/4″ hex wrench for installation, not included.)
  • Fits a variety of 12g and 20g shotguns
  • This is the 2nd generation model, includes bolt and bolt plug
  • Available in Black, Flat Dark Earth, Stealth Grey and OD Green.
Select options This product has multiple variants. The options may be chosen on the product page
-43%
Add to compare

Open Box Shockwave Technologies Raptor Grip for Remington 870 12-Guage Pump Action Shotgun Fixed Handle

In stock

$17.07 – $17.20

The Shockwave Technologies Raptor Grip is MADE IN AMERICA. With its enhanced texture, you gain a great hold on your weapon. Its glass-filled polymer construction is virtually indestructible.

This is a new style of bird’s head grip (aka birdshead grip aka witness protection grip aka chicken head grip aka border patrol grip aka entry-style grip aka bad ass grip) developed and manufactured by Shockwave Technologies, LLC in the U.S.A.

Select options This product has multiple variants. The options may be chosen on the product page
-30%
Add to compare

Open Box Shockwave Technologies Raptor F1 Forend for Remington 870/TAC 14

In stock

$17.55 – $33.62

The Shockwave Technologies Raptor F1 Forend is Made in America. With its enhanced texture, you gain a great hold on your firearm. Its glass-filled polymer construction is virtually indestructible. When you want to turn up your shotgun’s badass factor up to 11, reach for the Shockwave Raptor F1 forend. Cutting-edge design meets improved handling and fast target acquisition. A bolt-on replacement for your factory or aftermarket forend, the Shockwave F1 is available as a standalone forend, with an optional upper heat shield, and an optional forend installation tool— or any combination thereof.

  • Rugged glass-reinforced polymer
  • Lightweight
  • Extra length lets you personalize forward handhold
  • Ribbed inset area provides secure gripping
  • Front and rear handstops improve safety
  • A total of 10 M-LOK® slots for mounting lights, vertical grips, angled grips, Picatinny rails, and more
  • Optional upper heat shield prevents burns and offers rifle sights for fast target acquisition
  • Optional forend wrench simplifies and speeds installation
  • Compatible with Remington 870 12-gauge firearms and Remington Tac 14 12-gauge firearms
  • Veteran designed
  • Made in U.S.A.
Select options This product has multiple variants. The options may be chosen on the product page
-34%
Add to compare

Open Box Arisaka Defense Offset Optic Mount (Plate Only)

In stock

$16.59 – $23.61

The Patent Pending Arisaka Offset Optic Mount is a modular mounting solution that allows the user to select a 35 or 45 degree offset position for a red dot sight without requiring additional components. The 35-degree position brings the red dot sight up closer to slimmer, smaller scopes, while the 45-degree position provides additional clearance around wider turrets or larger, higher magnification scopes.

  • Designed to be attached to the top Picatinny rail of an AR15 rifle.
  • When the rifle is canted to make use of the offset red dot sight, the optic remains centered over the bore and maintains a lower 1/3 co-witness height.
  • The base and optic plates can be reversed, allowing for use on the left or right side.
Select options This product has multiple variants. The options may be chosen on the product page
-31%
Add to compare

Open Box Arisaka Defense Side Scout Mount KeyMod (SSM-K)

In stock

$25.44 – $39.27

The Arisaka Side Scout Mount (SSM-K) for KeyMod rails is designed for use with Surefire Scout Lights, the Arisaka 300 and 600 Series, and the Streamlight Protac Rail Mount lights. It replaces the stock Picatinny rail adapter with a low profile mount for M-Lok handguards, and tucks the light underneath either side of the ATPIAL laser/illuminator series, including the ATPIAL-C, AN/PEQ15, and LA-5/PEQ. It will also allow the light to clear the QD lever on the Steiner DBAL I2, A3, and D2.

  • Length: 1.265″
  • Thickness: 0.2″
  • Weight: 0.6 oz
  • CNC machined from 6061-T6 aluminum
  • MIL-A-8625 Type III hard coat anodized.
  • Includes necessary screws to attach light body to mount.
  • Requires a T15 and IP20/T20 Torx driver for installation (not included).
Select options This product has multiple variants. The options may be chosen on the product page
-28%
Add to compare

Open Box Cloud Defensive Light Control System for Streamlight ProTac Switch – LCSMK2

In stock

$50.19 – $64.87

The absolute best mounting solution for tape/pressure switches used to operate the Streamlight HLX ProTac Series Weaponlights. No more rubber bands. No more zip ties or wire or Velcro or duct tape. No more makeshift attachment methods that fail you. No more compromising with the light activation your life depends on.

  • The LCSmk2k features an “Early Exit” feature for the cables. This allows you to run the cable half-way through a given cable channel and then exit the bracket “early” if need more cable slack for a given setup.
  • The LCS Series Locks up 100% to your weapon. Zero movement. Zero play. Virtually indestructible.
  • Low-profile design with heavily radiused/chamfered edges ensure comfort and ergonomic function.
  • Weight with screws: 53 grams (1.9 oz)
  • Length: 3.5″
  • Width: 1.32″
  • Height: .575″ (switch sits .052″ above top edge of rail)
  • 100% MADE IN THE USA
Select options This product has multiple variants. The options may be chosen on the product page
-35%
Add to compare

Open Box Reptilia Black Hole Magwell for Glock 19 and Glock 23 GEN 3/4

In stock

$15.03 – $15.48

Molded from reinforced polymer, the Black Hole’s enlarged magazine well opening helps facilitate more efficient reloads without adding unnecessary bulk to your carry or duty sidearm

  • Compatible with 9mm & .40-caliber GLOCK pistols
  • Utilizes a unique rear spacer to ensure seamless fit and compatibility with both Gen 3 & Gen 4 frames
  • Impact-Modified Reinforced Nylon
  • Custom Alloy steel screw
  • 0.28 oz
  • Made in USA
  • Includes mounting screw and hex L-key
  • NOT compatible with OEM (factory) Glock 10 round magazines but is compatible with Magpul 10 round magazines.
Select options This product has multiple variants. The options may be chosen on the product page
-23%
Add to compare

Open Box Radian Raptor LT Sig MPX Ambidextrous Charging Handle

In stock

$69.22 – $84.41

Introducing the Raptor-LT Ambidextrous Charging Handle for SIG MPX™. The patented Raptor provides improved ergonomics and functionality compared to the factory variants. Its ambidextrous design allows rapid palm “blading” or finger-thumb charging of the weapon, ensuring the motion is fluid and fast from either the strong or support side.

  • Machined from 7075 aluminum, MILSPEC Type III hard-anodized.
  • Over-molded with high-strength, fiberglass-reinforced polymer for the ultimate combination of strength, weight, and durability.
  • The Raptor-LT is designed to match standard Magpul® color offerings.
  • Like all Radian products, the Raptor-LT comes with a limited lifetime warranty and is 100% designed and manufactured in the USA.
Select options This product has multiple variants. The options may be chosen on the product page
-20%
Add to compare

Open Box RS Regulate Bulgarian SAM7 Pattern Receiver End Cap

In stock

$33.54 – $35.20

Spare GKR compatible SAM series end cap for additional fitment options or swapping rails to a different host.

  • Includes bolt hardware
  • Minor fitting may be required
  • Material: Aircraft Grade Aluminum
  • Finish: Anodized
Select options This product has multiple variants. The options may be chosen on the product page
-22%
Add to compare

Open Box Geissele Super Precision – T1 Series Optic Mount

In stock

$86.70 – $105.73

The Super Precision T1 Series was developed specifically to work with the Aimpoint T1 and similarly mounted red dot optics.

  • Precision machined from a single piece of 7075-T6 high strength aluminum
  • Available in co-witness, lower third co-witness and 1.93″ options
  • Utilizing Geissele’s update of the classic nut and bolt method, this mount will attach your red dot to your weapon with 1,400 pounds of clamping force, and features 3 shear lugs for maximum rigidity and return to zero.
Select options This product has multiple variants. The options may be chosen on the product page
-22%
Add to compare

Open Box Reptilia DOT Mount for Aimpoint MICRO / CompM5 – 1.93″ Height

In stock

Original price was: $109.95.Current price is: $85.57.

The 1.93 DOT Mount™ by Reptilia is a lightweight, slim-line mounting solution for a variety of red dot optics. Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish, the 1.93 DOT Mount attaches to any M1913 Picatinny rail to place the optical axis at 1.93 inches above the rail. Its spring-loaded nitrided steel clamp and mounting bolt simplify the installation process, and sit flush with the body of the mount for a low-profile, anti-snag design.Like all Reptilia products, the DOT Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects

  • Aimpoint – Micro R-1, H-1, H-2, T-1, T-2, CompM5
  • Sig – ROMEO4 & ROMEO5
  • Vortex Optics – Crossfire, Sparc I & II
  • Primary Arms – Micro Dot & Advanced Micro Dot
  • Holosun Technologies – HS403 & HS503 Series
Select options This product has multiple variants. The options may be chosen on the product page
-1%
Add to compare

Open Box True North Concepts MHA Leg Strap Kit

In stock

$31.14 – $37.98

The Modular Holster Adapter Leg Strap Kit attaches directly onto the True North Concepts MHA, and for the first time in the history of holsters allows the shooter to choose the height where the leg strap sits. By attaching the specialty leg strap bracket onto the MHA, the leg strap will sit below the MHA, flush with the bottom of the MHA, or lightly above. For the first time, the shooter can choose the best position for their body size and comfort, custom tailoring their setup to their individual needs.

  • High Strength Polymer Multi-positional attachment Bracket
  • Adjustable 36″ long mil-w-5664 type 2 class 1 nylon and elastic webbing strap
  • Color-matched bracket, ITW Fastex buckle, and Triglide
  • Milspec Components & Berry Compliant sewn, 100% Made in America
  • 1.9 oz overall weight
  • Leg Strap bracket cross-compatibility with other popular straps
  • Modular Holster Adapter available here.
Select options This product has multiple variants. The options may be chosen on the product page
-46%
Add to compare

Open Box Unity Tactical Hot Button – M-LOK

In stock

$64.71 – $99.02

Hot Button is a revolutionary control device for weapon-mounted electronic accessories. Developed out of a need to conserve rail-estate, improve actuation ergonomics, and mechanically integrate with weapon fore ends, Hot Button has successfully reinvented how you interface with your lights and lasers.

  • 45-degree angled button for an exponentially more comfortable press
  • Raised, crenelated bezel protects the button from accidental actuation
  • Overall footprint is much smaller than factory OEM pressure pads
  • Available for standard Surefire tail caps and standard Crane-Style laser ports
  • Available in dual leads configuration
Select options This product has multiple variants. The options may be chosen on the product page