AR-15 / M4 / M16

-2%
Add to compare

Bravo Company BCM Gunfighter Grip MOD 1

Out of stock

$29.33 – $30.09

Upon introduction of the M16 in the 1960s the manual of arms for shooting positions included a bladed stance with an extended elbow on the fire control side. Because of numerous changes in the dynamics of the current fighting techniques we now virtually square off with the bad guy when engaging the target. The Gun Fighter’s Grip by BCM allows for a reduced angle and improved ergonomics when shooting in the modern gun fighting stances.

  • Reduced angle for improved ergonomics
  • Hinged trap door offering storage inside the grip with a water-resistant rubber gasket
  • Each grip includes both an extended modular insert to close the gap between the trigger guard and pistol grip, and a smooth modular insert for use with some rifles with larger built-in trigger guards. (user can decide which one to install)
  • Made in the USA and manufactured from high-quality impact resistant polymers.
  • Test fit to ensure proper function (may display attributes consistent with this QC process)
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Armaspec Victory Charging Handle for AR-15

Out of stock

$80.91

The Armaspec VictoryTM ambidextrous charging handle is designed for the 5.56/.223 rifle or pistol. With curved handles for hands-free charging, integrated vents ports to route captured gas downward away from the face, and center force charging to reduce shaft twisting.

  • True ambidextrous design – works well for both left and right-handed shooters
  • Enlarged charging handle latches
  • Integrated gas vents
  • Center force charging
  • Aggressive extended latch for positive engagement under any weather
  • Made in U.S.A.
  • Lifetime warrant
Select options This product has multiple variants. The options may be chosen on the product page
-17%
Add to compare

Armaspec Superlight Lower Parts Kit for .223/5.56

Out of stock

$62.29 – $85.22
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

San Tan Tactical Low Profile .750″ Gas Block and Gas Tube Builder

Out of stock

$40.96 – $59.24

The STT Low Profile Gas Block is a low and narrow, one-piece block designed to fit inside most free-float handguards; allows the use of rifle length forearms on carbine length barrels for a clean, streamlined look and added gripping surface. Securely attaches to the barrel with included dual hex head setscrews. Precision machined from 304 Stainless Steel, San Tan Tactical AR15/AR10 Gas Tubes have an extremely durable black Nitride finish that increases corrosion resistance, wear resistance, fatigue strength and cosmetic appeal while ensuring consistent gas flow to help your rifle cycle properly. Made in the USA with a 100% Lifetime Warranty.

  • Gas Block Machined from 17-4PH Stainless Steel
  • Gas Block Weight: 0.66 oz
  • Gas Block Dimensions: 1.35″ x 1″
  • Made in the USA
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

CMMG AR-15 Bolt Rehab Parts Kit

Out of stock

$41.09
View product
-23%
Add to compare

Bootleg Phosphate Bolt Carrier Completion Kit

Out of stock

Original price was: $79.95.Current price is: $61.26.

Whether you’re looking to complete your Bootleg, Inc. AR 15 Carrier or you like to keep extra parts on hand, our carrier completion kit has what you need. Our carrier completion kit fits perfectly with our gas adjustable carrier group to give you better customizability in gas suppression. Our firing pin retaining pin is made from 1038 steel wire, the bolt is 9310 steel coated in phosphorus, the cam pin is 4340 steel, and the firing pin is 4140 steel to ensure quality and durability. Complete your carrier with quality today!

  • All components made from steel for durability
  • Fits with Bootleg adjustable gas carrier
  • Kit contains 5.56 phosphate complete bolt, cam pin, firing pin, and firing pin retaining pin
View product
Add to compare

Geissele Automatics MK14 Super Modular Rail M-LOK – 15″

Out of stock

$331.50 – $357.00

The MK14 is the latest entry to the Geissele line up of Super Modular Rails. The new handguard design offers a smaller diameter and overall height to create a slimmer package. Included with the MK14 Super Modular Rail is an updated version of the proven Geissele Barrel Nut design, not only providing ease of installation but superior rigidity. The long surface contact of the 2.25” barrel nut interfaces with the receiver creating a platform that can be trusted to be straight and true the entire length of the free float rail. The MK14 is 3d precision machined using 6061-T6 Aluminum due to its strong, rigid and lightweight properties. Utilizing Magpul’s M-LOK technology in the 3, 6, and 9 o’clock positions allow the end user full customization and modularity of their rifle to securely mount lights, bipods and other firearm accessories. The Geissele MK14 Super Modular rail is finished in a durable and long lasting Type 3 Hardcoat Anodized available in either Black or Geissele’s DDC finish.

  • HEIGHT: 2.02″
  • COLOR: Black or DDC
  • MATERIAL: 6061-T6
  • FINISH: Type 3 Hardcoat Anodize
  • LENGTH: 15″
  • INNER DIAMETER: 1.27″
  • OUTER DIAMETER (DAQ*): 1.52″
  • SMR MK14 15″ WEIGHT: 11.6oz (13oz w/ barrel nut)
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Geissele Automatics Super Dynamic 3 Gun (SD-3G) Trigger

Out of stock

$245.00
View product
-29%
Add to compare

Rosco Manufacturing 16″ M4 5.56 NATO Bloodline Mid-Length Barrel (1/7 Twist)

Out of stock

Original price was: $169.00.Current price is: $119.96.
View product
-17%
Add to compare

Rosco Manufacturing 14.5″ M4 5.56 NATO Bloodline Mid-Length Barrel (1/7 Twist)

Out of stock

Original price was: $145.00.Current price is: $120.06.
View product
-20%
Add to compare

Rosco Manufacturing 12.5″ M4 5.56 NATO Bloodline Barrel (1/7 Twist)

Out of stock

Original price was: $146.00.Current price is: $116.10.

This 12.5” Rosco barrel is designed to bridge the gap between SBR-Pistol and/ or RECCE platforms and delivers amazing precision performance for its compact size. It is the perfect addition for the person attempting to create the ultimate intermediate patrol platform.

  • Barrel Length: 12.5″
  • Weight: 21.79oz
  • Material: 4150 CMV
  • Caliber: 5.56
  • Profile: Government
  • Twist: 1/7
  • Thread: 1/2 x 28
  • Gas Block Size: .750
  • Gas System Length: Carbine Length Barrel
  • Crown: 11 Degree
  • Finish: Nitride
  • Extension Finish: Nitride
View product
Add to compare

Geissele Automatics Super Semi-Automatic Enhanced (SSA-E) Trigger

Out of stock

$245.00
View product
Add to compare

Midwest Industries Combat Fixed HK Sight – Front

Out of stock

$70.13
View product
-21%
Add to compare

B5 Systems Enhanced SOPMOD Stock

Out of stock

$95.00 – $121.99
Select options This product has multiple variants. The options may be chosen on the product page
-21%
Add to compare

B5 Systems Bravo SOPMOD Stock

Out of stock

$49.02 – $85.94
Select options This product has multiple variants. The options may be chosen on the product page
-13%
Add to compare

B5 Systems Trigger Guard

Out of stock

Original price was: $22.00.Current price is: $19.15.

The best guard for big hands and gloved shooting. Especially in cold weather or tactical operations, you’ll need to upgrade for more room around the trigger. The B5 curved trigger guard is designed to accommodate gloved shooting, and even maintains the original swing-down feature for use with heavier winter gloves.

  • Made of 6061 aluminum
  • Milspec Type III anodized finish
  • Drop-in upgrade
  • Weight: 3.00 Ounces
  • Width: 2.10 (in)
  • Height: 0.53 (in)
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

B5 Systems QD End Plate

Out of stock

$27.44
View product
Add to compare

Battle Arms Development 3-Piece Enhanced Lower Parts Kit

Out of stock

$35.18

BAD-LPK-PK3 3 Piece Enhanced Lower Parts Kit Consisting of the following:

  • Enhanced Bolt Catch (BAD-EBC-IC), which is a cost-friendly alternative, without sacrificing the quality for your AR build! The AR-15 Cast Enhanced Bolt Catch is 8620 heat treated cast steel with a manganese phosphate black finish.
  • Enhanced Single Sided Safety Selector (BAD-E4S-IC) for the AR15 Style Rifles.
  • Enhanced Magazine Catch – BAD-EMC-IC
  • More information available below
View product
Add to compare

Battle Arms Development Enhanced Pin Set – Titanium

Out of stock

$43.54
View product
Add to compare

Battle Arms Development Enhanced Pin Set – Steel

Out of stock

$30.17

Battle Arms Development Enhanced Pin Set (BAD-EPS) for the AR15 / M16 / M4 style rifles. The set consists of the Enhanced Take-down Pin (BAD-ETP) and Enhanced Pivot Pin (BAD-EPP). Precision Swiss CNC machined from round stock steel bars, the BAD-ETP & BAD-EPP are case hardened and finished in mil-spec black manganese phosphate.

  • AR15 / M16 / M4 Compatible – Fits all AR15/M16/M4 lower receivers with mil-spec .250in diameter front pivot and rear take-down pin holes.
  • Patent Pending Pivot Pin & Take-down Pin Head Designs – Greatly improved gripping surface and pull strength without the use of oversize heads.
  • Low Profile Pin Heads – Low drag and never in the way. Lower profile than mil-spec pin heads.
  • Ambidextrous Safety Compatible – The Enhanced Take down Pin (BAD-ETP) head design does not obstruct the use of the right side ambidextrous safety selector lever.
  • Extended Pin Tips (+0.030in over mil-spec) – Added tip length noticeably aids in starting/pushing the pins out from the left side of the receiver, without undue protrusion.
  • Bullet Tip Guide – Cone shaped recess at both pin tips prevent accidental bullet or tool slip and reduced the chance of scratching/damaging of the receiver.
  • Patent Pending EZ Guide Channel & Magnetic Assist Install – Easy, hassle free magnet assisted installation of the EPP (Enhanced Pivot Pin). No more lost detents and springs.
  • Weight: .49oz
View product
Add to compare

Scalarworks PEAK/01 Fixed Rear Sight – 1.42″ Height

Out of stock

$149.00
View product
-4%
Add to compare

Daniel Defense Grip-N-Rip Charging Handle

In stock

$104.00 – $118.23

The Daniel Defense Grip-N-Rip AR-15 and AR-10 Charging Handles were designed with the features to enhance every user’s comfort and performance.

  • Ambidextrous Latch
  • Material: 7075-T6 Aluminum
  • Handle Material: 6061- T6 aluminum
  • Finish: Type III hard coat anodize
  • Weight: 1.3 oz
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Daniel Defense Rail Mount QD Attachment Point w/ Swivel

Out of stock

$58.48
View product
-61%
Add to compare

Bravo Company BCM Gunfighter Vertical Grip

Out of stock

$19.46 – $19.65
  • Mounted in a forward angle, the BCM Gunfighter grip increases the rigidity of the forearm, while providing a more natural wrist angle when grabbing the vertical grip.
  • Mounted in reverse angle to increase control when grabbing handguard and vertical grip.
  • Flat sides give better yaw control to the shooter during firing and non-firing manipulations.
  • Aggressive texture and generous storage volume combined with modular design to allow improvements and adaptation in the future.
  • Cross bolt designed to work with improvised tools (such as a quarter) allows for easy adjustment or re-tightening.
  • Hinged trap door offering storage inside the grip with a water-resistant rubber gasket.
  • Reversible clamps allow the user to setup fasteners to reside on either side.
  • Spring-loaded clamp makes installation and removal easier.
  • Made in the USA and manufactured from high-quality impact resistant polymers.
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Bravo Company BCM Gunfighter KAG M-LOK Grip

Out of stock

$21.98

The KAG is the end result of a collaboration between BCM® and Travis Haley, founder of Haley Strategic Partners and inventor of multiple weapons manipulation enhancements in the firearms industry. Designed to complement modern shooting grips, the Kinesthetic Angled Grip (KAG) uses a biomechanically efficient forward rake to create an interface for positive retention and joint relief to the wrist, elbow, and shoulder, allowing for smooth weapon manipulation without substantial increase to the girth of the weapon system. Textured on both front and back, the profile of the KAG creates a channel for consistent and positive engagement which translates directly into improved efficiency in weapons manipulation and target to target transitions.

  • Forward rake gives positive retention when using “C-clamp” (thumb over bore) method of handguard support
  • Works as a rest for supported firing positions
  • Slight angle without significant bulk adds just the right amount of relief to the wrist without substantially increasing the girth of the handguard
  • Small profile is just enough to get repeatable hand position on weapon forend
  • Textured in front and back for positive engagement
  • Made in the U.S.A. from high quality, impact-resistant polymers.
Select options This product has multiple variants. The options may be chosen on the product page
-30%
Add to compare

Battle Arms Development RACK Charging Handle for AR-15

Out of stock

Original price was: $125.00.Current price is: $87.48.
View product
Add to compare

Lantac USA Ultimate Takedown Pin Set – Titanium

Out of stock

$46.82

Precision machined on Swiss-style turning centers, the Lantac USA Ultimate Takedown Pin sets are manufactured from the highest quality materials to the highest standards. They ship complete with a 3D printed rear pin removal tool (RTT™).

  • The Patent Pending UPS™ (Ultimate Pin Set) allows the user to install and remove an AR15 Pivot Pin without the use of a tool.
  • The unique design incorporates a ramped groove that holds the detent in place at the time of installation and another ramp allows access to the retaining slot at 90° to groove.
  • Pins feature Patent Pending aggressively crenulated heads for improved grip, this facilitates easier removal of the pin from the receiver.
  • The rear pin features the same retaining slot and ramp, meaning that it can be removed easily by sliding it to a halfway position and then rotating.
  • This causes the takedown detent to ride up the ramp and onto the outer surface of the pin, making remove extremely simple.
View product
Add to compare

Lantac USA Ultimate Takedown Pin Set – Stainless Steel

Out of stock

$38.24

Precision machined on Swiss-style turning centers, the Lantac USA Ultimate Takedown Pin sets are manufactured from the highest quality materials to the highest standards. They ship complete with a 3D printed rear pin removal tool (RTT™).

  • The Patent Pending UPS™ (Ultimate Pin Set) allows the user to install and remove an AR15 Pivot Pin without the use of a tool.
  • The unique design incorporates a ramped groove that holds the detent in place at the time of installation and another ramp allows access to the retaining slot at 90° to groove.
  • Pins feature Patent Pending aggressively crenulated heads for improved grip, this facilitates easier removal of the pin from the receiver.
  • The rear pin features the same retaining slot and ramp, meaning that it can be removed easily by sliding it to a halfway position and then rotating.
  • This causes the takedown detent to ride up the ramp and onto the outer surface of the pin, making remove extremely simple.
View product
-5%
Add to compare

Lantac USA Ultimate Forward Assist – Solid

Out of stock

Original price was: $42.99.Current price is: $40.90.

The UFA-S is precision swiss lathe turned & manufactured from certified 4140 Cr-Mo steel, giving improvements to strength, corrosion resistance and durability over the original materials.

  • Parts are all heat treated to 48-52 Rc (Rockwell C). In addition, all parts are QPQ (Quench Polish Quench) Nitrided for improved corrosion resistance and enhanced lifespan.
  • The main Plunger spring is manufactured with the improvement of Stainless 316 music wire (as per ASTM A313) for enhanced corrosion resistance.
  • Closed-end coils are also used rather than the original open ends for improved seating and alignment. Springs are stress relieved and air-cooled.The Plunger Detent Spring is improved and manufactured from Zinc plated music wire (as per ASTM A288) for enhanced corrosion resistance.
  • Springs are all stress relieved as per the mil specification.
  • The assembly is retained within the upper receiver with an improved spiral design pin as opposed to a slotted version for increased strength and durability. Pins are fully certified by the manufacturer.
  • The design of the Cap has been improved by reducing its diameter and snagging potential, creating a more streamline surface flow when assembled into the upper receiver.
  • Exterior surface knurling around the cap’s edge allows for positive engagement with a gloved or naked hand while removing the circular ridge that exists on the current design.
  • The weight of the assembly has also been improved to 20.227g (.7135oz) from 22.481g (.7930oz).
  • All outer details are bead blasted to create a satin, reduced reflectivity surface prior to finishing.
  • Manufactured in the USA from USA sourced materials and finishes.
View product
-5%
Add to compare

Magpul Suppressor Cover – 5.5″

Out of stock

Original price was: $99.95.Current price is: $94.95.

The Magpul Suppressor Cover – 5.5” is the first product of its kind able to stand up to the extreme temperatures caused by extended strings of semiautomatic and automatic fire and protect the user and equipment against burns, while also speeding up the cooling process. Constructed of a heat-resistant polymer sleeve overlaid onto a raised stainless steel heat shield that mounts directly to the suppressor body with steel clamps, the Magpul Suppressor Cover – 5.5” minimizes heat transfer to keep external cover temperatures up to 1000 degrees F cooler than the surface of the suppressor and allows cooling airflow across the can.

  • Optimized for 1.5” outer diameter round suppressors with a body length of approximately 5.5” (not including attachment hardware/interface) such as the Surefire SOCOM556-RC2.
  • Reduces thermal signature of host firearm and mitigates mirage effects in sight picture
  • Minimizes retained heat, allowing faster cooling than any other suppressor cover technology
  • High strength corrosion-resistant stainless steel heat shield
  • Two stainless steel clamps provide a strong, rigid and reliable interface capable of sustained firing sessions and rough handling
  • High temp polymer sleeve withstands brutal suppressor temperatures during extended periods of firing without deterioration
  • Made in the USA.
Select options This product has multiple variants. The options may be chosen on the product page
-24%
Add to compare

VG6 Precision Delta 5.56 Flash Hider (1/2×28)

Out of stock

Original price was: $59.99.Current price is: $45.35.

The Delta 556 was designed as an affordable device that embodies VG6’s passion for performance.

  • Material: 17-4ph Heat Treated Stainless Steel
  • Finish: Black Nitride – Satin Finish(Half Gloss)
  • Surface Hardness: 68RC
  • Platform: AR-15
  • Caliber: 5.56mm/.223 Remington
  • Thread: 1/2-28 RH
  • Weight: 2.56 oz
  • Weight (oz) 2.56 oz
  • Length: 2.21″
  • Includes crush washer
  • Made In USA
View product
-20%
Add to compare

VG6 Precision CAGE Device

Out of stock

Original price was: $74.99.Current price is: $59.99.

The CAGE (Concussion Altering Gas Expansion) Device is the pinnacle of concussion reduction technology. Its primary essential task is to disrupt side concussion while keeping or enhancing the characteristics of the Gamma and Epsilon series of muzzle devices. It accomplishes this with ease.

  • Material: Highest Quality Stainless Steel
  • Finish: BLACKNITRIDE™ – Matte Black Finish
  • Surface Hardness: 68RC
  • Compatibility – Dual Chambered Muzzle Devices, GAMMA 556, EPSILON 556, GAMMA 556 EX and GAMMA 300BLK
  • Weight: 1.4oz
  • Muzzle brake not included
  • Made In America
  • Platform: AR15
View product
Load more products
Loading...