Glock 31
USED – ZEV Technologies Small Mag Release for 4th and 5th Gen GLOCK
Out of stock
$38.35The Zev Technologies™ Gen 4 Magazine Release for the Glock® was designed with an aggressive rearward angle and a non-slip textured face that matches the factory finish of your Gen 4 grip. This Mag release is a drop-in replacement part. Compatible with Gen5 models. Not compatible with Gen3 models.
USED – Forward Controls Design Glock MOS Mounting Plate for RMR/SRO
Out of stock
$54.12OPF-G, RMR (Optics Platform, Glock, for RMR) is a Glock MOS Adapter Set 01 and Set 02 compatible plate for mounting Trijicon RMR or SRO on Glock Gen 4 and Gen 5 slides, G17, G19, G34, G35, G41 (width 25mm/1 inch.) and G40 that uses Set 02.
- Sight is to be fully supported in the front and rear by recoil lugs/fences, with minimum movement.
- Eliminate the need to use an additional sealer plate.
- Correct length sight to plate, and plate to slide screws. Screws are to be Torx.
- The adapter plate is to be machined in steel.
- Proudly designed and made in the USA.
Zev Technologies Glock Magazine Extension – Aluminum
In stock
$47.00 – $48.60This high quality aluminium base pad from Zev Technologies offers an extended round capacity for 17 round Glock magazines.
- Only compatible with 17 round magazines (see list below)
- 3 piece design easy to assemble and disassemble
- Finish: Black Type III Hard Anodize
- Material: Aluminum
- 9mm Magazines: +5 Round Extension
- .40 Cal Magazines: +4 Round Extension
Zev Technologies Glock Magazine Extension – Polymer
Out of stock
$30.38This high quality polymer base pad from Zev Technologies offers an extended round capacity for 17 round Glock magazines.
- Only compatible with 17 round magazines (see list below)
- 3 piece design easy to assemble and disassemble
- Material: Polymer
- 9mm Magazines: +5 Round Extension
- .40 Cal Magazines: +4 Round Extension
Forward Controls Design OPF-G Glock MOS Mounting Plate – DPP
In stock
$68.87OPF-G, DPP (Optics Platform, Forward Controls, Delta Point Pro) uses the same proven design of the OPF-G, RMR to keep the Delta Point Pro immobile, the simplest and most effective way to prevent sight-to-plate mounting screws from loosening and shearing.
- Billet machined in 4140.
- Heat treated and black nitride coated.
- Torque Value plate to slide: 13in/lb.
- Torque Value sight to plate: 25in/lb.
- Proudly designed and made in the USA.
Forward Controls Design Glock MOS Mounting Plate for RMR/SRO
Out of stock
$68.87OPF-G, RMR (Optics Platform, Glock, for RMR) is a Glock MOS Adapter Set 01 and Set 02 compatible plate for mounting Trijicon RMR or SRO on Glock Gen 4 and Gen 5 slides, G17, G19, G34, G35, G41 (width 25mm/1 inch.) and G40 that uses Set 02.
- Sight is to be fully supported in the front and rear by recoil lugs/fences, with minimum movement.
- Eliminate the need to use an additional sealer plate.
- Correct length sight to plate, and plate to slide screws. Screws are to be Torx.
- The adapter plate is to be machined in steel.
- Proudly designed and made in the USA.
Killer Innovations Velocity Glock Trigger
Out of stock
$123.49The Velocity Glock Trigger provides a noticeably smoother pull with reduced creep and a positive reset, all without sacrificing safety or reliability. The flat trigger blade provides a stable and textured surface for better purchase and improved trigger control. The Velocity Trigger is precision manufactured from the highest quality materials and is made in the USA. An everyday carry trigger never felt so good! Please note: Due to differences in metal composition and finishing processes, Killer Innovations cannot guarantee exact color matches among their accessory items.
- Compatible with: Glock 17 / Gen 1-4, Glock 17L, Glock 19 / Gen 1-4
- For all compatible Glock models, view the size guide.
- Weight: .48oz
- Trigger Pull: 5.5lbs
- Material: Aircraft-grade aluminum
- Finish: Anodized
- Made in the USA
ZEV Technologies Universal PRO Magwell – Standard for Glock Gen 1-4
In stock
$101.92Zev Technologies PRO Mag-well is designed for the professional shooter that is looking for the competitive edge of a mag-well without the bulk of a Glock race gun.
- designed to fit both Gen 3 and 4 Glock frames which features a solid 1 piece design
- Gen 4 back straps may need to be modified if used
- Compatible Glock models G17, G17L, G22, G24, G31, G34, G35 and G37
NOTE: 10 Round magazines WILL NOT work with this model of mag-well. If 10 round capacity magazines are primarily used, this product is not recommended.
ZEV Technologies Small Mag Release for 4th and 5th Gen GLOCK
Out of stock
$39.90 – $40.00The Zev Technologies™ Gen 4 Magazine Release for the Glock® was designed with an aggressive rearward angle and a non-slip textured face that matches the factory finish of your Gen 4 grip. This Mag release is a drop-in replacement part. Compatible with Gen5 models. Not compatible with Gen3 models.