M-LOK

Add to compare

Open Box Emissary Development Micro Cable Clip

In stock

$9.95 – $11.20

Serious cable management with a tiny footprint. Cable Clip Micro is a highly modular wire guide system designed for M-LOK rails.

  • Easily control, organize and route electrical cables and wires.
  • Sold as a 3-pack
  • Clean up your rail and reduce snag hazards.
  • 360-degree rotatable with nearly unlimited adjustability.
  • Patent pending
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Emissary Development Handbrake Mini – M-LOK

In stock

$32.00 – $37.00
  • Miniaturized version of the original Handbrake
  • Optimized for setups where forward hand placement is required
  • Features the same enhanced ergonomics and control dynamics as the original Handbrake
  • Utilizes proprietary texture pattern
  • Anti-slip bottom ledge
  • Built-in front and rear barricade stop
  • Made in the USA
Select options This product has multiple variants. The options may be chosen on the product page
-10%
Add to compare

Open Box Arisaka Defense Side Scout Mount M-LOK (SSM-M)

In stock

Original price was: $37.00.Current price is: $33.17.

The Arisaka Side Scout Mount (SSM) is designed for use with Surefire Scout Lights, the Arisaka 300 and 600 Series, and the Streamlight Protac Rail Mount lights. It replaces the stock Picatinny rail adapter with a low profile mount for M-Lok handguards, and tucks the light underneath either side of the ATPIAL laser/illuminator series, including the ATPIAL-C, AN/PEQ15, and LA-5/PEQ. It will also allow the light to clear the QD lever on the Steiner DBAL I2, A3, and D2.

Select options This product has multiple variants. The options may be chosen on the product page
-5%
Add to compare

Open Box True North Concepts GripStop – Standard Length for M-LOK

In stock

Original price was: $51.99.Current price is: $49.50.

Standard length GripStop for M-LOK Rails. Increased ergonomics and control on all M-LOK compatible firearms.

  • Fits the Magpul M-LOK mounting interface
  • Weight : 2 oz with hardware
  • Rugged 6061-T6 Aluminum construction
  • MilSpec Type III anodized finish

Note: Shades of FDE (Earth Brown) may vary due to the chemical process during the Type 3 Hardcoat.

Select options This product has multiple variants. The options may be chosen on the product page
-18%
Add to compare

Open Box Arisaka Defense Offset Picatinny Mount – M-LOK

In stock

Original price was: $60.00.Current price is: $49.02.

The Patent Pending Arisaka Offset Picatinny Mount is a combination of our Offset Scount Mount and Picatinny adapter, and is meant for use with Picatinny based lights like the Surefire X300 or Inforce WML, plus other rail mounted accessories.

  • Length: 1.77″
  • Height: 0.20″ (at Surefire Scout Light mounting point)
  • Weight: 1.0 oz
  • The mount is CNC machined from 6061-T6 aluminum and MIL-A-8625 Type III hard coat anodized
  • Requires a 5/64″ Allen wrench for installation (not included).
  • Made in the USA
Select options This product has multiple variants. The options may be chosen on the product page
-10%
Add to compare

Open Box Arisaka Defense Inline Scout Mount – M-LOK

In stock

$33.17

The Patented Arisaka Inline Scout Mount is designed specifically for the Surefire Scout Light M600 and M300 series weapon lights, the Arisaka 300 and 600 Series Lights, and the Streamlight Protac Rail Mount 1, 2, and HL-X. It replaces the stock Picatinny rail adapter with a low-profile mount for M-Lok handguards. The mount is especially useful on handguards that feature 45-degree angle mounting flats, such as the BCM MCMR, Geissele Automatics SMR MK4 and MK8, Daniel Defense MFR, KAC URX4, ALG Defense EMR, MI Gen 3, Mega MML, and Mega/Hodge Wedge Lock.

  • Length: 3.0”
  • Height: 0.20″ (at Surefire Scout Light mounting point)
  • Weight: 0.6 oz
  • Material: 7075-T6 aluminum
  • Finish: Type III Hard Coat Anodized Black, FDE, and Tan
  • Made in the USA
Select options This product has multiple variants. The options may be chosen on the product page
-20%
Add to compare

Open Box Cloud Defensive M-LOK Light Control System, Mount for SureFire ST07 Tape Switch

In stock

$56.16 – $58.77
  • Unique Patented design utilizes a slot that ensures a snug, perfect friction-fit for the tape switch. Once installed its not coming out unless you want it to.
  • Precision CNC machined from Certified 6061 aluminum for superior strength.
  • Proprietary dual cable control channels machined into the one-piece mount.
  • Proprietary “Early Cable Exit” machined into each cable control channel. This allows you to only use part of the cable control channel should you need more slack in the cable to span across the handguard, et.
  • 100% MADE IN THE USA
Select options This product has multiple variants. The options may be chosen on the product page
-46%
Add to compare

Open Box Unity Tactical Hot Button – M-LOK

In stock

$64.71 – $99.02

Hot Button is a revolutionary control device for weapon-mounted electronic accessories. Developed out of a need to conserve rail-estate, improve actuation ergonomics, and mechanically integrate with weapon fore ends, Hot Button has successfully reinvented how you interface with your lights and lasers.

  • 45-degree angled button for an exponentially more comfortable press
  • Raised, crenelated bezel protects the button from accidental actuation
  • Overall footprint is much smaller than factory OEM pressure pads
  • Available for standard Surefire tail caps and standard Crane-Style laser ports
  • Available in dual leads configuration
Select options This product has multiple variants. The options may be chosen on the product page
-34%
Add to compare

Open Box Unity Tactical Hot Button – Rail Mount

In stock

$78.68 – $99.02

Hot Button is a revolutionary control device for weapon-mounted electronic accessories. Developed out of a need to conserve rail-estate, improve actuation ergonomics, and mechanically integrate with weapon fore-ends, Hot Button has successfully reinvented how you interface with your lights and lasers.

  • 45-degree angled button for an exponentially more comfortable press.
  • Raised, crenelated bezel protects the button from accidental actuation.
  • Overall footprint is much smaller than factory OEM pressure pads.
  • Available for standard Surefire tail caps and standard Crane-Style laser ports.
  • Hot Buttons come standard with 7″ cables.
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Magpul MOE M-LOK Forend for Mossberg 590/590A1

In stock

$36.17
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Emissary Development NANO Carrier M-LOK

In stock

$12.00 – $24.00
  • Minimalist solution for weapon or helmet-mounted carry of the Multitasker® NANO Tool
  • Designed in collaboration with Multitasker Tools, utilizing their SpaceFrame® secure docking slot
  • Provides quick and easy access to the NANO tool where you need it most
  • Built-in extraction divot offers rapid removal
  • Ultra low-profile design
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Emissary Development Micro Cable Clip

In stock

$21.00 – $26.00

Serious cable management with a tiny footprint. Cable Clip Micro is a highly modular wire guide system designed for M-LOK rails.

  • Easily control, organize and route electrical cables and wires.
  • Sold as a 3-pack
  • Clean up your rail and reduce snag hazards.
  • 360-degree rotatable with nearly unlimited adjustability.
  • Patent pending
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Emissary Development Handbrake M-LOK

In stock

$35.00 – $40.00
Select options This product has multiple variants. The options may be chosen on the product page
-23%
Add to compare

Reptilia TORCH M-LOK Light Body for 3.7V (18350)

In stock

$92.89 – $109.15
Select options This product has multiple variants. The options may be chosen on the product page
-67%
Add to compare

Unity Tactical Hot Button – Rail Mount

In stock

$99.99 – $149.98

Hot Button is a revolutionary control device for weapon-mounted electronic accessories. Developed out of a need to conserve rail-estate, improve actuation ergonomics, and mechanically integrate with weapon fore-ends, Hot Button has successfully reinvented how you interface with your lights and lasers.

  • 45-degree angled button for an exponentially more comfortable press.
  • Raised, crenelated bezel protects the button from accidental actuation.
  • Overall footprint is much smaller than factory OEM pressure pads.
  • Available for standard Surefire tail caps and standard Crane-Style laser ports.
  • Hot Buttons come standard with 7″ cables.
Select options This product has multiple variants. The options may be chosen on the product page
-67%
Add to compare

Unity Tactical Hot Button – M-LOK

In stock

$99.99 – $113.05
Select options This product has multiple variants. The options may be chosen on the product page