M-LOK

The Magpul M-LOK Bipod Mount allows for the attachment of most Harris®-style stud mounted bipods to M-LOK compatible hand guards and forends. The M-LOK Bipod Mount offers a low-profile, robust, and elegant mounting solution for the most common bipods on the market. By utilizing the direct-connect properties of the M-LOK system, the bipod sits closer to the mounting surface than other adapters while providing superior support to the bipod for strength and stability. The Bipod Mount is also compatible with other accessories that attach to traditional sling studs. Machined from Mil-Spec-anodized aluminum, the M-LOK Bipod Mount also features beveled ends and corners to reduce snagging and sharp edges. All hardware necessary for attachment directly to M-LOK slots on either aluminum or polymer hand guards and forends is included.

• Max overall length of 2.33″.

M-LOK Type 2 Rail Covers are low-profile, two-piece covers that install directly onto most M-LOK aluminum hand guards (non-polymer). These M-LOK covers are non-orientation specific, which allows the user to mount them in any direction desired without affecting function. Not compatible with MAGPUL MOE M-LOK, MOE SL, and SGA forends, and may not be compatible with free-float handguards that have a wider and flatter profile, as they will not seat deep enough to allow the center portion to lock-in.

• Includes six panels, each covering one M-LOK slot.
• Made in the USA.
• Non-orientation specific: No up / down, left / right, front / back orientation
• Contact surfaces made up of TSP
• Low Profile: Covers barely protrude more than 1/8″ above the rail surface
• Simple install and uninstall: Using a simple, pointed tool, covers can be installed or uninstalled in seconds

The Arisaka Quick Detach (QD) Mount is a low profile design for M-Lok hand-guards. It features an anti-rotation interface and accepts all standard QD sling swivels, as well as the Geissele/ALG Defense forged QD sling swivel.

• Height: 0.375″
• Weight: 0.3 oz
• CNC machined from 6061-T6 aluminum
• MIL-A-8625 Type III hard coat anodized
• Requires a 5/32″ Allen wrench for installation (not included).
• Made in the USA.

IWC’s reversible Barrier Hand Stop is designed with an integrated Quad-Point Grip profile on one half and an ergonomic resistance point on the other half

• Provides force point to drive the firearm against an object like a door frame.
• Allows for extra grip when wearing gloves.
• The Smooth face provides comfortable, ergonomic, and low profile leverage.
• Material: 6061-T6 Aluminum.
• Finish: Hard anodize Type III black matte finish.
• Dimensions: Height: 1.113″ Width: .600″ Length: 1.350″
• Manufacturer lifetime warranty.
• Made by Americans in the USA.

The Magpul M-LOK Hand Stop Kit serves as a lightweight, low-profile M-LOK slot index point for improved weapon control, or as a forward stop to prevent the shooter’s hand from reaching the hot front sight assembly or muzzle.

The kit includes one M-LOK Hand Stop, one M-LOK Index Panel, and one M-LOK Rail Cover Type 2 for the individual user to configure their kit as they desire. Also included in this kit is an adapter for use with Magpul M-LOK equipped polymer Hand Guards/Forends as well as other wider profile aluminum hand guards.

• Made in U.S.A.
• Light weight, low-profile M-LOK slot index point for improved weapon control
• Forward stop to prevent the shooter’s hand from reaching the hot front sight assembly or muzzle
• Aggressive TSP Texture for enhanced weapons control

The Arisaka Vertical Grip is a robust, minimal grip for M-Lok handguards. It features a radiused profile at the top which tapers to meet the mounting surface on the handguard, giving a low-profile feel and ergonomic comfort. Twin mounting screws ensure secure attachment. The grip is hollow, with no end-cap.

• Height: 2.50”
• Width: 1.30”
• Weight: 1.80oz
• CNC machined from 6061-T6 aluminum and MIL-A-8625 Type III hard coat anodized
• Requires a 3/32” Allen wrench for installation (not included)
• Made in the USA

Shorter (K) length GripStop for M-LOK Rails. Increased ergonomics and control on all M-LOK compatible firearms.

• Fits the Magpul M-LOK mounting interface
• Weight : 2 oz with hardware
• Rugged 6061-T6 Aluminum construction
• MilSpec Type III anodized finish

Note: Shades of FDE (Earth Brown) may vary due to the chemical process during the Type 3 Hardcoat.

For 1913 Mounted Lights (M-LOK® Compatible)

• Fully ambidextrous: made to mount flush or cantilever off either the left or right side of the rail system.
• Designed for use with Surefire™ Scout Light mounting interface.
• Multiple mounting holes for ideal rail placement.
• Designed to mount on the 3 or 9 o’clock rail positions.
• Durable Aluminum construction
• Intently designed to be low-profile and snag-free.
• Patent Pending mounting system.
• Minimal added weight, 0.5 oz.

The Arisaka Ring Light Mount provides a flexible yet secure way to attach handheld lights to your handguard. Available for KeyMod, M-Lok, and CMR interfaces, it uses a vertically anchored ring system that comes in two sizes to accommodate a wide variety of lights.

The clamping ring will accept light bodies with a diameter from 1.00″ to 1.03.” A light can be installed and removed without having to take the mount off your handguard.

The offset placement of the light while using the mount is designed to allow clearance with most front sights. For example, a 1.03″ light like the Surefire G2 will work with the Magpul Gen 2 MBUS on a Noveske NSR, which is one of the thinnest handguards at 1.48″ wide.

• Weight: 1.0 oz.
• The mount is CNC machined from 6061-T6 aluminum
• MIL-A-8625 Type III hard coat anodized.
• Requires a 3/32″ Allen wrench for installation (not included).
• Made in the USA.