Vertical Grips
Mission First Tactical REACT Short Grip
Out of stock
$22.99Compact textured vertical grip designed to minimize material and dimension while providing a positive grip surface. Allows the support hand to apply rearward pressure keeping the weapon shouldered, yielding better muzzle control and accuracy.
- Weight: 2oz
- Height: 3.960″
- Width: 1.381″
- Length: 2.205″
- Secure water-resistant plugged battery or part storage
- Customizable storage system; quick access tab diminishes rattle
- Flat non-slip bottom surface aids in supported firing positions
Bravo Company BCM Gunfighter Vertical Grip
Out of stock
$39.95- Mounted in a forward angle, the BCM Gunfighter grip increases the rigidity of the forearm, while providing a more natural wrist angle when grabbing the vertical grip.
- Mounted in reverse angle to increase control when grabbing handguard and vertical grip.
- Flat sides give better yaw control to the shooter during firing and non-firing manipulations.
- Aggressive texture and generous storage volume combined with modular design to allow improvements and adaptation in the future.
- Cross bolt designed to work with improvised tools (such as a quarter) allows for easy adjustment or re-tightening.
- Hinged trap door offering storage inside the grip with a water-resistant rubber gasket.
- Reversible clamps allow the user to setup fasteners to reside on either side.
- Spring-loaded clamp makes installation and removal easier.
- Made in the USA and manufactured from high-quality impact resistant polymers.
Magpul M-LOK MVG Vertical Grip
Out of stock
$21.80The M-LOK MVG is a light weight, inexpensive vertical foregrip that attaches directly to M-LOK compatible hand guards and forends with no additional Picatinny rails required. Made from the same high quality polymer as other Magpul products, the M-LOK MVG uses the new Magpul TSP texture for positive control in all environments.
- With rounded contours and a shorter length, it has been optimized for use with the “thumb break method” of shooting and can also be used as a traditional vertical foregrip.
- All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.
- Weight, w/hardware: 1.4 oz.
- Length: 3.0″
- Made in U.S.A.
Magpul RVG – Rail Vertical Grip for 1913 Picatinny
In stock
$23.70Designed for use with 1913 Picatinny railed hand guards, the RVG is a basic, light weight, cost-effective vertical fore grip. Shape is ergonomically designed for use as a traditional vertical grip. It has also been optimized for use with the “thumb break method” of shooting as taught by Magpul DynamicsSM. Includes all mounting hardware plus a universal mounting rail for custom fitting to many factory plastic hand guards.
- Made in U.S.A.
Arisaka Defense Vertical Grip for KeyMod Rails
In stock
$30.00The Arisaka Defense Vertical Grip is a robust, minimal grip for KeyMod handguards. It features a radiused profile at the top which tapers to meet the mounting surface on the handguard, giving a low-profile feel and ergonomic comfort. Twin mounting screws ensure secure attachment. The grip is hollow, with no end-cap.
- Height: 2.50″
- Width: 1.30″
- Weight: 1.8 oz
- CNC machined from 6061-T6 aluminum
- MIL-A-8625 Type III hard coat anodized.
- Requires a 9/64″ Allen wrench for installation (not included).
- Made in the USA.
BCM Gunfighter KeyMod Vertical Fore Grip BCM-VG-KM-MOD-3
Out of stock
$20.81 – $21.00Direct Attach to KeyMod™ Version
- Low-profile length for increased mobility and decreased “snag” factor.
- The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
- Can be mounted in reverse angle to increase control when grabbing handguard and grip.
- Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations.
- Anchor and bolt system offers a simple robust design, while maintaining a lightweight 1.9 ounces.
- Made in the U.S.A., manufactured from high quality, impact resistant polymers.
BCM Gunfighter M-LOK Vertical ForeGrip VG-MCMR-MOD-3
Out of stock
$20.84BCMGUNFIGHTER™ Vertical Grip Mod 3 (M-LOK® Compatible)
Direct Attach Version
- Low-profile length for increased mobility and decreased “snag” factor.
- The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
- Can be mounted in reverse angle to increase control when grabbing handguard and grip.
- Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations.
- A lightweight design at 1.9 ounces.
- Made in the U.S.A., manufactured from high quality, impact resistant polymers.
BCM Gunfighter Short Vertical ForeGrip VG-S Picatinny
Out of stock
$36.49- Low-profile length for increased mobility and decreased “snag” factor.
- The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
- Can be mounted in reverse angle to increase control when grabbing handguard and grip
- Flat sides give better yaw control to the shooter during firing and non-firing manipulations.
- Aggressive texture and storage volume combined with modular design to allow improvements and adaptation in the future.
- Cross bolt designed to work with improvised tools (such as a quarter) and allow for easy adjustment or re-tightening.
- Reversible clamps allow user to set up fasteners to reside on either side.
- Spring-loaded clamps makes installation and removal easier.
- Made in the U.S.A., and manufactured from high quality, impact resistant polymers.
*Test fit to ensure proper function (may display attributes consistent with this QC process)
Unity Tactical M-LOK Vertical Fore-Grip VFG
In stock
$24.00 – $24.80The Unity Tactical VFG is a perfect size Vertical Fore Grip for M-LOK rails.
- 360-degree sloping sides provide increased grip-ability from all angles.
- The unique shape creates a seamless grip flow from rail to VFG.
- Weight: less than 1.5oz
- Dimensions: 1.6 × 4.3 × 6.8 in
- Includes all mounting hardware required for M-LOK handguards.