Brand
Headwear
Thyrm VariArc Helmet Mount
Out of stock
$29.99 – $34.99With positive indexing at forward, umbrella, and admin task angles, the Variarc™ Helmet Mount shines light where you need it.
- Positively locks in the forward index position.
- Directs light through 360 degrees, with 8 additional lower-force index positions.
- Works in vertical positions for umbrella lighting rooms, canopy illumination, and IR strobe signaling.
- Can be used in downward angles for admin & task lighting.
- Picatinny Accessory Rail with 3 slots and 4 ridges.
- Features retention holes on both ends for dummy wiring critical gear.
- Mounts on standard dovetail-style helmet rails (Ops-Core®), Team Wendy® or M-LOK® side mounts.
- Durable, reinforced polymer construction with steel hardware.
- M-LOK version comes with genuine Magpul M-LOK nuts.
- Designed and made in the USA.
Walker’s Razor Slim Electronic Muff
In stock
$53.22With its ultra-compact design, the Razor Slim electronic muffs offer superior hearing protection in a low-profile design.
- 2 hi-gain omnidirectional microphones
- Full dynamic range HD speakers for clear & balanced sound
- Low noise/frequency tuned for natural sound clarity
- Independent volume controls
- Sound dampening composite housing
- Sound activated compression – 0.02 second reaction time
- Noise Reduction Rating – 23 db
- Audio input jack
- Recessed volume control knobs
- Comfortable headband w/a metal wire frame
- External battery door
- Operates on 2 ‘aaa’ batteries – included
Noisefighters AX14-PRO Articulating Night Vision Monocular Mount
Out of stock
$135.00Noisefighter’s toughest and most versatile mounting arm for the PVS-14.
- The AX14-PRO weighs only 0.9 oz / 26 g total, or approximately 52% less than a milspec J-Arm.
- The articulating knuckle permits full range of motion and tight stowing on both the left and right sides.
- The mechanism is pre-tensioned at the factory and should never need to be adjusted, but a simple hex key wrench may be used for adjustment as necessary.
- A slight rearward sweep of the inner arm helps position the monocular eyepiece closer to one’s eye and provides greater compatibility for those with larger helmets.
- Material: High-performance polymer from Arkema®. Milspec anodized aluminum. 316 stainless steel.
- Finish: Black
- Dimensions: 3.5 x 1 x 1.25″
Microbat Systems Vampire Topside
In stock
$90.00The Vampire Topside is a modular add-on for the Vampire system.
- Maximize accessible storage without changing the center of gravity on the helmet.
- Reduce bulk on the back of the helmet to increase head mobility and comfort while driving.
- Allows the use of strobes lanyards, and flags/ID.
- Allows ambidextrous and quiet access to stored items.
Spiritus Systems Raid Cover – FLUX
In stock
$79.95Soldiers have been covering their helmets for a long time and the concept is not new to the nylon industry. Helmet covers have many benefits that keep them relevant even as the ballistic technology of helmets evolve. Primarily, covers aid in the protection of your helmet and provide a sacrificial barrier between the elements and your lid.
- This version of the RAID Cover is for the MTEK FLUX Helmet line.
- Material: 500D Cordura Nylon
- Reinforced attachment points
- Slick minimalistic design
- IR defeating properties
Unity Tactical SPARK Cage
Out of stock
$18.72The Spark CAGE increases the versatility of the popular SPARK Marking Light.
- Molded from impact-resistant polymer
- secures a single SPARK via press-fit.
- All four sides feature a split pass-through for standard 1″ webbing
- Integral rare-earth magnets allow it to attach to most metal surfaces
Peltor ComTac VI NIB Headset w/ Standard Dynamic Mic – NATO Wiring
Out of stock
$998.99 – $1,157.35ComTac™ VI has been improved with new omni-directional microphones and high fidelity speakers with greater sensitivity to help replicate sound more clearly and accurately.
- Connection Type: Integrated Communication, Wired.
- Noise Cancelling (IP68) Speech Microphone for Communication in Noise.
- Omni Directional Environmental Microphones for Level-Dependent Situational Awareness.
- NIB (Natural Interaction Behavior) for Peer to Peer Headset Communication.
- Level Dependent, Electronic Hearing Protection to Help Protect from Impulse and Steady-State Noise.
- Rugged 3M™ PELTOR™ Design for Trusted Performance.
- Mission Audio Profile (MAP) to Select Audibility Settings Based on Anticipated Noise Exposure.
Echo Arms Low Profile Helmet Light (White/IR) w/ M-LOK Plate
Out of stock
$347.14 – $353.98The Echo Arms Helmet Light utilizes an integrated Magpul M-LOK interface to mount directly to the Fast Attach Mount. This bolt-on design allows the light to sit much lower than any light mounted on a 1913 rail. The integrated mount eliminates unneeded bolts and hardware that are heavy, come loose, and prone to rust.
- Features Surefire KM1-E Vampire head.
- Powered by one 123A lithium battery.
- Produces 250 lumens of brilliant white light.
- 100 milliwatts of invisible infrared output.
Echo Arms Low Profile Helmet Light (White) w/ M-LOK Plate
In stock
$227.29 – $253.98The Echo Arms Helmet Light utilizes an integrated Magpul M-LOK interface to mount directly to the Fast-Attach Mount. This bolt-on design allows the light to sit much lower than any light mounted on a 1913 rail. The integrated mount eliminates unneeded bolts and hardware that are heavy, come loose, and prone to rust.
- Malkoff E1 Hyper head with a tightly focused TIR Optic for maximum reach.
- Outstanding medium to long-range spotter.
- Easily illuminates objects at 350+ feet.
- Manufacturer lifetime warranty against defects in workmanship or quality.
Echo Arms Fast Attach M-LOK Plate w/ Low Profile Light Body
In stock
$78.20 – $103.98The Echo Arms Helmet Light utilizes an integrated Magpul M-LOK interface to mount directly to the Fast-Attach Mount. This bolt-on design allows the light to sit much lower than any light mounted on a 1913 rail. The integrated mount eliminates unneeded bolts and hardware that are heavy, come loose, and prone to rust.
- Unparalleled versatility in light selection.
- Any Surefire Scout or E-Series light that takes a single CR123 battery will work with this body.
- This product is body only and intended to be finished by the end-user.
- Manufacturer lifetime warranty against defects in workmanship or quality.
Echo Arms Fast Attach M-LOK Plate
Out of stock
$15.53 – $23.98The Fast-Attach M-LOK Plate allows attachment to a variety of M-LOK compatible accessories from flashlights to M1913 rail sections or action sports HD cameras. The aggressive hook material on the bottom then allows fast attachment and detachment of the accessory without the need for expensive or helmet-specific mounting solutions.
- Standard M-LOK
- Dimensions – 3.25″ x 2.0″
- Polymer Construction
Echo Arms Fast Attach M-LOK Plate w/ Aluminum Rail
Out of stock
$29.65 – $38.98The Fast-Attach M-LOK Plate allows attachment to a variety of M-LOK compatible accessories from flashlights to M1913 rail sections or action sports HD cameras. The aggressive hook material on the bottom then allows fast attachment and detachment of the accessory without the need for expensive or helmet-specific mounting solutions.
- Standard M-LOK
- Custom Echo Arms 3 Slot aluminum M1913 rail
- Dimensions – 3.25″ x 2.0″
- Polymer
Unity Tactical MARK 2.0 – Modular Attach Rail Kit
In stock
$72.00 – $79.00The Modular Attached Rail Kit (MARK) 2.0 allows the end-user to seamlessly integrate their hearing protection and/or integrated communications into their head borne systems and improve the consistent seal of ear protection. The MARK 2.0 is compatible with most major helmet types and the most popular electronic hearing protection. The MARK 2.0 Kit will work with 3M Peltor™ Headsets right of the package. If attaching to Sordin/MSA™ style headsets, use the SARA Adapters (sold separately). Kit includes:
- (1 Pair) Unity MARK 2.0 Adapter Assembly
- (1 Pair) ARC™ Style Backer Plates + Hardware
- (2 Pair) EXFIL™ Hardware
Unity Tactical Platform Adapter
In stock
$22.00 – $26.00The Unity Tactical Platform Adapter was developed in response to Special Operations Forces wanting to attach the USSOCOM-contracted AMP™ Tactical Headset from Ops-Core® to non-ARC™ Railed helmet platforms. The Platform Adapter will convert the AMP™ Helmet Arm to interface with Team Wendy® EXFIL™ (1-3.0) Rails as well as M-LOK rails used by manufacturers such as MTEK® and Hard Head Veterans®.
- Weight: EXFIL: 4g, MLOK: 2g
- Compatible with: EXFIL Rail (Team Wendy), MLOK Rail (MTEK, HHV)
- Material: Reinforced Polymer
- Breakaway: 8 ft lbs.
- Country of Origin: U.S.A.
Unity Tactical SARA Sordin Adapters
In stock
$55.34 – $63.00Sordin Arc Rail Adapters (SARA) were derived out of a need to directly attach MSA Sordin’s directly to an end user’s helmet. Rather than reinventing the wheel, the SARA calls on the spring tension generated by the Unity MARK rail adapters to achieve proper seal around the user’s ears and seamlessly integrate into the user’s head borne system. Lightweight, streamlined, and designed with the simplicity and strength demanded by the end-user, the SARA eliminates the headaches and discomfort associated with wearing headband style ear pro inside the helmet. Includes ESS studs for compatibility with both Over The Head (OTH) and Behind The Head (BTH) systems. Kit Includes:
- (4) Unity SARA adapters
- (4) Mounting Set Screws
- (2) ESS Mounting Studs
- Installation Instructions
Noisefighters Sightlines Gel Ear Pads
In stock
$50.00- Bottom line: these are upgraded gel ear pads that are the first with relief cuts for glasses to pass through without breaking the noise seal and causing headaches from increased clamping pressure.
- Best results with straight-style glasses arms, and our super-soft and flexible silicone gel produces an amazing seal with other types of glasses arms.
- Use of super-premium acoustic memory foam and allowing for a closed head seal leads to impressively better sound deadening.
Designed by a Marine Corps combat veteran, made in the USA, and designed for use in any climate. Polyurethane outer skin is UV-resistant, waterproof, and much longer-lasting than vinyl used on cheap pads. These gel pads are tough. Plus, we warranty our pads for an entire year, regardless of what continent or climate you operated in.
Unity Tactical Remora Mount for 3M Peltor™
Out of stock
$29.00The Unity Tactical Remora™ for 3M Peltor™ Rail Adapters provides an accessory mounting platform directly overhead of the rail mount hub. It makes the most use of the very limited rail-estate on a helmet with rail-mounted comms that utilize the OEM rail mount assembly.
Based on the original Remora™ for our successful MARK platform, Remora™ for 3M Peltor™ quickly and easily installs to the headset mounting hub using included hardware. The mount platform provides unprecedented versatility. Users are no longer relegated to precariously attaching lights and other accessories with Velcro.
Unity Tactical Cold Weather Liner (CWL)
Out of stock
$108.00 – $126.00The Unity Cold Weather Liner (CWL) is designed to install in any helmet with Velcro pads. By integrating directly into the helmet, the CWL creates a barrier against the elements with micro fiber fleece that keeps the wearer’s head warm. The material thickness creates minimal or no displacement of pads that can cause the helmet to not ride properly, as is the case while wearing a standard beanie under the shell. This ensures correct shell coverage of the head, alignment of night vision goggles, and fitting of communications gear. Operator comfort is increased exponentially by providing more coverage to exposed areas under the helmet shell with dual layer fleece while the same pads that normally contact the head will continue to do so with the CWL installed.
Unity Tactical MARK Helmet Accessory Kit
Out of stock
$69.00 – $137.00The Modular Attached Rail Kit (MARK) allows the end user to seamlessly integrate their hearing protection and/or integrated communications into their headborne systems and improve the consistent seal of ear protection. The MARK is compatible with every major helmet type and the most popular electronic hearing protection. The MARK Kit will work with 3M Peltor Headsets right of the package. If attaching to Sordin/MSA style headsets, use the SARA Adapters (sold separately).
Constructed of impact-resistant polymer, the MARK is designed for use in the most austere environments.
Unity Tactical Remora MARK Mount
Out of stock
$37.00The modern warrior’s helmet is a platform for command and control technology. From lights and cameras to strobes and illuminators, helmets are uniquely able to point accessories where the operator’s eyes are facing. This makes mounting visual and recording devices a paramount concern.
The Remora™ is an add-on accessory that integrates a FUSION™ interface into the MARK™ comms mounting system. It provides a lightweight, low profile platform for a variety of accessories such as task lights, digital recording devices, infrared illuminators, and more. The FUSION™ footprint makes it compatible with all FUSION™ accessories. So, operators can attach rings, M1913 rail, or direct-mount devices. The Remora™ can be pivoted 15 degrees around the MARK™ hub, allowing light and camera angles to be customized.
Remora™ is compatible with all existing MARK™ systems and all mounting hardware is included. Available in black only.
Unity Tactical KNUCKL Helmet Accessory Mounting Kit
Out of stock
$49.00 – $122.00KNUCKL™ is a modular helmet accessory mount for use on helmets equipped with accessory rails such as Ops Core, Team Wendy, Crye and others. It offers tension-adjustable 3-axis articulation and the ability to mount up to two accessories depending on your mission. The mounting interfaces accept most Unity FUSION accessories. It also incorporates a socket to accept the Wilcox Retention Lanyard to retain the gear during a break-away.
NOTE: KNUCKL is not compatible with Team Wendy Helmets when used in conjunction with helmet mounted hearing protection. If you are looking for this combination, please look at MARK + REMORA for TW Helmets
- KNUCKL Mount
- Arc Adapter
- Team Wendy Adapter
- MPLS Adapter
- Contour Camera Adapter
- Rail Section
- Mounting Hardware
- Add Ons:
- Wilcox Lanyard