Bravo Company USA (BCM)
Bravo Company BCM Gunfighter Enhanced Lower Parts Kit for AR-15
Out of stock
$119.95This kit includes all the Mil-Spec quality components you have come to expect from BCM, along with some fantastic upgrades. The kit includes:
- BCM PNT Hammer, Hammer Spring, BCM PNT Trigger, Trigger Spring, Hammer/Trigger Pins
- Disconnector, Disconnector Spring
- Bolt Catch, Bolt Catch Plunger, Bolt Catch Spring, Bolt Stop Pin
- Rear Pivot Pin
- Buffer Retainer, Buffer Retainer Spring
- Magazine Catch Button, Magazine Catch Spring, Magazine Catch
- Rear Take Down Pin
- Selector (Safety), Selector Detent, Selector Detent Spring
- BCM Enhanced Trigger Guard, BCM Trigger Guard Pin, BCM Trigger Guard Screw
- BCM Pistol Grip Mod 3, Grip Screw, Locking Washer
- Take Down/ Pivot Pin Detent, Take Down/ Pivot Pin Detent Spring
Bravo Company BCM Gunfighter Stock Kit – Mod 0
In stock
$114.92The strongest lightweight polymer stock available for your mil-spec receiver extension is here.
- Snag-free design, No sharp edges prevent tangling.
- Modular VBOST (Vehicle Borne Operations Sling Tab).
- 2 different types of ambidextrous sling mounting options, including QD swivel sockets.
- 5 parts and 1 screw allow for modular adaption of future stock options and configurations.
- BCM® 7075T6 Mil-Spec Receiver Extension.
- Locking Nut M4 (Castle).
- Mil-Spec Carbine Action Spring.
- Carbine Buffer.
- BCM® QD Swivel Mount End Plate.
Bravo Company BCM Gunfighter Ambi Charging Handle w/ Mod X3X Large Latches
In stock
$89.95Driven by over a decade of feedback from real-world combat operations, BCM® has made continual design refinements and structural improvements to the charging handle in the M4 and M16 to address the current manual of arms for the weapon system.
- A new Charging Handle and Extended Latch System.
- Material: forged from 7075 T6 Aluminum.
- Finish: Hard Coat Anodized per Mil-A-8625F, Type III, Class 2.
- The Mod 3X3 latches extend past the main body of the charging handle by approximately 1.14″.
- Compatible with Mil-Spec AR-15 Direct Impingement Weapon Systems.
- Made in the USA.
Bravo Company BCM Gunfighter Picatinny Rail Sling Mount
Out of stock
$36.11The BCM Gunfighter RSM: Picatinny Rail Sling Mount
- Fits standard 1913 Picatinny rail interface.
- Accepts standard QD (quick detachable) push-button sling swivels (not included).
- Non-rotational locking interface.
- Requires two lugs and one 1913 slot to mount properly.
- All steel construction.
- Includes hex wrench.
- Like all BCM® weapons and accessories, Made in the USA.
Bravo Company BCM Gunfighter Compensator MOD 1 – 7.62 (5/8×24)
In stock
$99.95This Compensator was not designed as a gamers comp. It was designed for tactical applications to reduce muzzle rise, flash signature, noise, and lateral pressure.
- Tuned slots and interior cones offer maximum recoil mitigation, compensation of muzzle-rise, and flash reduction.
- Dual-action brake minimizes side pressure and designed to have much less noise associated with typical compensators. Makes it perfect for working in teams for CQB.
- Built for the 21st Century Gunfighter
- Includes a Crush Washer
- Should be installed by a qualified armorer.
- Threaded 5/8 x 24 for 7.62mm AR10 and many 300 AAC Blackout barrels
Bravo Company BCM Gunfighter Quick Detachable Sling Mount for M-LOK
Out of stock
$19.92Bravo Company’s BCM GUNFIGHTER MCMR-SM Quick Detachable Sling Mount” M-Lok Compatible is low-profile for increased mobility and decreased snag factor. It fits a standard push button “quick-detach” sling swivel (not included). It has an 8 position (360 degree) non-rotational locking interface and all steel construction.
- Low-Profile for increased mobility and decreased “snag” factor
- Compatible with M-LOK mounting system
- Fits standard push button, quick detach sling swivel (not included)
- 8-position (360°), non-rotational locking interface
- All steel construction
- Quick detach sling swivel not included.
Bravo Company BCM Gunfighter Grip MOD 3
Out of stock
$19.92 – $19.94Bravo Company’s BCM Gun Fighter’s Grip Mod 3 grip allows for a reduced angle and improved ergonomics when shooting in the modern gun fighting stances. The Mod 3 is up to a quarter of an inch wider than the BCMGUNFIGHTER Mod 0 and Mod 1 grips. Each grip features an extended forward tang to close the gap between the trigger guard and pistol grip” and a high rise “beavertail” style back strap. Made in the USA and manufactured from high-quality impact resistant polymers.
- Reduced angle for improved ergonomics and trigger control
- Hinged trap door offering storage inside the grip with a water-resistant rubber gasket
- Each grip features an extended forward tang to close the gap between the trigger guard and pistol grip, and a high rise “beavertail” style back strap.
- Up to a quarter of an inch wider than the BCMGUNFIGHTER Mod 0 and Mod 1 grips.
- Made in the USA and manufactured from high-quality impact resistant polymers.
- Each grip test fit to ensure proper function (may display attributes consistent with this QC process)
Bravo Company BCM Gunfighter SOPMOD Stock Kit – Mod 0
In stock
$115.90 – $116.71Over a year in design, development, and testing, Bravo Company introduces the BCMGUNFIGHTER™ Stock. The strongest light-weight polymer stock available for your mil-spec receiver extension is here! Kit includes:
- BCM® 7075T6 Mil-Spec Receiver Extension,
- Locking Nut M4 (Castle),
- Mil-Spec Carbine Action Spring,
- Carbine Buffer,
- BCM® QD Swivel Mount End Plate.
Bravo Company BCM Gunfighter Grip MOD 2
Out of stock
$29.95 – $31.27Upon introduction of the M16 in the 1960s the manual of arms for shooting positions included a bladed stance with an extended elbow on the fire control side. Because of numerous changes in the dynamics of the current fighting techniques we now virtually square off with the bad guy when engaging the target. The Gun Fighter’s Grip by BCM allows for a reduced angle and improved ergonomics when shooting in the modern gun fighting stances.
- Up to a quarter of an inch wider than the BCMGUNFIGHTER Mod 0 and Mod 1 grips. Same wider profile as the BCMGUNFIGHTER Grip Mod 3.
- A new AR15 grip refined for the modern warfighter, optimized for modern weapon manipulation techniques.
- Reduced grip angle keeps wrist in line with trigger for improved ergonomics and trigger control.
- Interchangeable inserts for either a smooth front strap or a duckbill to cover trigger guard gap.
- Interchangeable backstraps for various hand sizes, weapons, and grip positions.
- Hinged trap door with interior storage compartment and water-resistant rubber gasket.
- Made in the U.S.A., manufactured from high-quality impact resistant polymers.
Bravo Company BCM Gunfighter Grip MOD 1
Out of stock
$27.85 – $27.95Upon introduction of the M16 in the 1960s the manual of arms for shooting positions included a bladed stance with an extended elbow on the fire control side. Because of numerous changes in the dynamics of the current fighting techniques we now virtually square off with the bad guy when engaging the target. The Gun Fighter’s Grip by BCM allows for a reduced angle and improved ergonomics when shooting in the modern gun fighting stances.
- Reduced angle for improved ergonomics
- Hinged trap door offering storage inside the grip with a water-resistant rubber gasket
- Each grip includes both an extended modular insert to close the gap between the trigger guard and pistol grip, and a smooth modular insert for use with some rifles with larger built-in trigger guards. (user can decide which one to install)
- Made in the USA and manufactured from high-quality impact resistant polymers.
- Test fit to ensure proper function (may display attributes consistent with this QC process)
Bravo Company BCM Gunfighter Vertical Grip
Out of stock
$39.95- Mounted in a forward angle, the BCM Gunfighter grip increases the rigidity of the forearm, while providing a more natural wrist angle when grabbing the vertical grip.
- Mounted in reverse angle to increase control when grabbing handguard and vertical grip.
- Flat sides give better yaw control to the shooter during firing and non-firing manipulations.
- Aggressive texture and generous storage volume combined with modular design to allow improvements and adaptation in the future.
- Cross bolt designed to work with improvised tools (such as a quarter) allows for easy adjustment or re-tightening.
- Hinged trap door offering storage inside the grip with a water-resistant rubber gasket.
- Reversible clamps allow the user to setup fasteners to reside on either side.
- Spring-loaded clamp makes installation and removal easier.
- Made in the USA and manufactured from high-quality impact resistant polymers.
Bravo Company BCM Gunfighter KAG M-LOK Grip
Out of stock
$20.84The KAG is the end result of a collaboration between BCM® and Travis Haley, founder of Haley Strategic Partners and inventor of multiple weapons manipulation enhancements in the firearms industry. Designed to complement modern shooting grips, the Kinesthetic Angled Grip (KAG) uses a biomechanically efficient forward rake to create an interface for positive retention and joint relief to the wrist, elbow, and shoulder, allowing for smooth weapon manipulation without substantial increase to the girth of the weapon system. Textured on both front and back, the profile of the KAG creates a channel for consistent and positive engagement which translates directly into improved efficiency in weapons manipulation and target to target transitions.
- Forward rake gives positive retention when using “C-clamp” (thumb over bore) method of handguard support
- Works as a rest for supported firing positions
- Slight angle without significant bulk adds just the right amount of relief to the wrist without substantially increasing the girth of the handguard
- Small profile is just enough to get repeatable hand position on weapon forend
- Textured in front and back for positive engagement
- Made in the U.S.A. from high quality, impact-resistant polymers.
Bravo Company BCM Milspec Carbine Receiver Extension Buffer Tube
Out of stock
$39.99For your AR15, M16, M4. Carbine receiver extension (buffer tube) machined from 7075T6 and manufactured to Mil-Spec dimensions and specifications. Mil-Spec receiver extensions have a slightly smaller dimension where the stock slides on.
- Hard Coat Anodized per Mil-A-8625F, Type III, Class 2
- These tubes should be used with stocks such as USGI, BCM®, Colt, LMT, SOPMOD, VLTOR, Stag Arms, Magpul CTR (Milspec), and others that a made to the Mil-Spec size.
Bravo Company BCM M4 Upper Receiver Assembly w/ Laser Markings
In stock
$145.41Built to the correct Mil-Specs, with the inside diameter for the barrel extension slightly undersized for a tighter fit to the barrel and a more accurate rifle. Please use a heat gun or hairdryer to warm up the threaded bore of the receiver if the barrel extension is too tight.
- Precision machined to correct Mil-Specs from 7075 T6 Forgings extension, providing the user with superior strength when dropped or when mortaring malfunction clearance drills.
- Fully Assembled with forward assist, and ejection port cover
- Mil-Std 1913 Rail for mounting optics and accessories
- Machined for use with barrels that use an M4 barrel extension
- Laser etched T-markings for addressing the remounting of optics
- Includes Mil-Spec Forward Assist with heat treated tool steel pawl, with press fit and pinned cap
- Hard Coat Anodized per Mil-A-8625F, Type III, Class2
- Dry Film Lube on interior bore per Mil-Specs
- As with all BCM® products, Made in the U.S.A.
Bravo Company BCM MCMR M-LOK Compatible Modular Rail – 10 (10.5″)
In stock
$214.95Featuring the same industry-leading barrel nut and lock-up design as originally introduced on BCM’s evolutionary KMR handguard, the MCMR Series of handguards gives the shooter modularity in the M-LOK platform. This proprietary patented mounting system (US Patent 8904691), includes a mechanical index to the 12:00 rail and positions mounting hardware to mitigate the movement caused by heat generated by the weapon system.
- M-LOK Compatible mounting system.
- Free Float Handguard eliminates loads from barrel, reducing the deflection for more accurate shooting.
- Precision Machined Aerospace 6061-T6 Aluminum Alloy, for high strength and lightweight.
- Proprietary engineered profile offers additional cross sectional strength.
- Steel Barrel Nut (same KMR, MCMR, and QRF series), to resist movement under heat.
- Hard Coat Anodized per Mil-A-8625F, Type III, Class 2
- Handguard alone weighs 6.6 oz
- Handguard mounting hardware 2.3 oz
- Includes BCM M-LOK Compatible Sling Mount
- Length: 10.5″
- 1.3″ Inside Diameter
- 1.5″ Wide
Bravo Company BCM 1913 Modular Light Mount – KeyMod
Out of stock
$41.32For 1913 Mounted Lights – KeyMod™ Version
- Fully ambidextrous: made to mount flush or cantilever off either the left or right side of the rail system.
- Optional high and low mounting position for the 1913 rail section.
- Fits most common 1913-rail pistol/weapon light systems
- Multiple mounting holes for ideal placement.
- Designed to mount on the 3 or 9 o’clock rail positions.
- Durable Aluminum construction. Intently designed to be low-profile and snag-free
- Patent Pending mounting system
- Minimal added weight, 0.9 oz.
Bravo Company BCM 1913 Modular Light Mount for M-LOK
Out of stock
$41.32For 1913 Mounted Lights (M-LOK® Compatible)
- Fully ambidextrous: made to mount flush or cantilever off either the left or right side of the rail system.
- Designed for use with Surefire™ Scout Light mounting interface.
- Multiple mounting holes for ideal rail placement.
- Designed to mount on the 3 or 9 o’clock rail positions.
- Durable Aluminum construction
- Intently designed to be low-profile and snag-free.
- Patent Pending mounting system.
- Minimal added weight, 0.5 oz.
