Stealth Grey

Add to compare

Open Box Shockwave Technologies Raptor F1 Forend for Mossberg 500/590

In stock

$21.14 – $21.56

The Shockwave Technologies Raptor F1 Forend is Made in America. With its enhanced texture, you gain a great hold on your firearm. Its glass-filled polymer construction is virtually indestructible. When you want to turn up your shotgun’s badass factor up to 11, reach for the Shockwave Raptor F1 forend. Cutting-edge design meets improved handling and fast target acquisition. A bolt-on replacement for your factory or aftermarket forend, the Shockwave F1 is available as a standalone forend, with an optional upper heat shield, and an optional forend installation tool— or any combination thereof.

  • Rugged glass-reinforced polymer
  • Lightweight
  • Extra length lets you personalize forward handhold
  • Ribbed inset area provides secure gripping
  • Front and rear handstops improve safety
  • A total of 10 M-LOK® slots for mounting lights, vertical grips, angled grips, Picatinny rails, and more
  • Optional upper heat shield prevents burns and offers rifle sights for fast target acquisition
  • Optional forend wrench simplifies and speeds installation
  • Compatible with Mossberg 500/590 12-gauge firearms
  • Veteran designed
  • Made in U.S.A.
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Emissary Development Handbrake Mini – M-LOK

In stock

$32.00 – $37.00
  • Miniaturized version of the original Handbrake
  • Optimized for setups where forward hand placement is required
  • Features the same enhanced ergonomics and control dynamics as the original Handbrake
  • Utilizes proprietary texture pattern
  • Anti-slip bottom ledge
  • Built-in front and rear barricade stop
  • Made in the USA
Select options This product has multiple variants. The options may be chosen on the product page
-4%
Add to compare

Open Box Magpul M-LOK Rail Covers – Type 2

Out of stock

Original price was: $13.95.Current price is: $13.40.

M-LOK Type 2 Rail Covers are low-profile, two-piece covers that install directly onto most M-LOK aluminum hand guards (non-polymer). These M-LOK covers are non-orientation specific, which allows the user to mount them in any direction desired without affecting function. Not compatible with MAGPUL MOE M-LOK, MOE SL, and SGA forends, and may not be compatible with free-float handguards that have a wider and flatter profile, as they will not seat deep enough to allow the center portion to lock-in.

  • Includes six panels, each covering one M-LOK slot.
  • Made in the USA.
  • Non-orientation specific: No up / down, left / right, front / back orientation
  • Contact surfaces made up of TSP
  • Low Profile: Covers barely protrude more than 1/8″ above the rail surface
  • Simple install and uninstall: Using a simple, pointed tool, covers can be installed or uninstalled in seconds
Select options This product has multiple variants. The options may be chosen on the product page
-43%
Add to compare

Open Box Shockwave Technologies Raptor Grip for Mossberg 500 – Stealth Grey

In stock

Original price was: $29.95.Current price is: $17.20.

The Shockwave Technologies Raptor Grip is Made in America. With its enhanced texture, you gain a great hold on your weapon. Its glass-filled polymer construction is virtually indestructible.

This is a new style of bird’s head grip (aka birdshead grip aka witness protection grip aka chicken head grip aka border patrol grip aka entry-style grip aka bad ass grip) developed and manufactured by Shockwave Technologies, LLC in the U.S.A.

  • Unique angle of the Raptor Grip minimizes felt recoil, allowing maximum control shot after shot. It also just looks badass. Yes, mounting hardware and bolt hole plug are included. (Requires a 1/4″ hex wrench for installation, not included.)
  • Fits a variety of 12g and 20g shotguns
  • This is the 2nd generation model, includes bolt and bolt plug
  • Available in Black, Flat Dark Earth, Stealth Grey and OD Green.
Select options This product has multiple variants. The options may be chosen on the product page
-30%
Add to compare

Open Box Shockwave Technologies Raptor F1 Forend for Remington 870/TAC 14

In stock

$17.55 – $33.62

The Shockwave Technologies Raptor F1 Forend is Made in America. With its enhanced texture, you gain a great hold on your firearm. Its glass-filled polymer construction is virtually indestructible. When you want to turn up your shotgun’s badass factor up to 11, reach for the Shockwave Raptor F1 forend. Cutting-edge design meets improved handling and fast target acquisition. A bolt-on replacement for your factory or aftermarket forend, the Shockwave F1 is available as a standalone forend, with an optional upper heat shield, and an optional forend installation tool— or any combination thereof.

  • Rugged glass-reinforced polymer
  • Lightweight
  • Extra length lets you personalize forward handhold
  • Ribbed inset area provides secure gripping
  • Front and rear handstops improve safety
  • A total of 10 M-LOK® slots for mounting lights, vertical grips, angled grips, Picatinny rails, and more
  • Optional upper heat shield prevents burns and offers rifle sights for fast target acquisition
  • Optional forend wrench simplifies and speeds installation
  • Compatible with Remington 870 12-gauge firearms and Remington Tac 14 12-gauge firearms
  • Veteran designed
  • Made in U.S.A.
Select options This product has multiple variants. The options may be chosen on the product page
-1%
Add to compare

Radian Raptor Sig LT MCX Ambidextrous Charging Handle

Out of stock

$93.54 – $108.12

Introducing the Raptor-LT Ambidextrous Charging Handle for SIG MCX™.

  • Material: 7075 aluminum
  • Finish: Type III hard-anodized
  • Its ambidextrous design allows rapid palm “blading” or finger-thumb charging of the weapon.
  • 100% designed and manufactured in the USA.
  • Comes with a limited lifetime warranty
Select options This product has multiple variants. The options may be chosen on the product page
-1%
Add to compare

Radian Raptor LT Sig MPX Ambidextrous Charging Handle

Out of stock

$93.87 – $108.12

Introducing the Raptor-LT Ambidextrous Charging Handle for SIG MPX™. The patented Raptor provides improved ergonomics and functionality compared to the factory variants. Its ambidextrous design allows rapid palm “blading” or finger-thumb charging of the weapon, ensuring the motion is fluid and fast from either the strong or support side.

  • Machined from 7075 aluminum, MILSPEC Type III hard-anodized.
  • Over-molded with high-strength, fiberglass-reinforced polymer for the ultimate combination of strength, weight, and durability.
  • The Raptor-LT is designed to match standard Magpul® color offerings.
  • Like all Radian products, the Raptor-LT comes with a limited lifetime warranty and is 100% designed and manufactured in the USA.
Select options This product has multiple variants. The options may be chosen on the product page
-5%
Add to compare

Magpul SGA Stock for Remington 870

Out of stock

Original price was: $114.95.Current price is: $109.20.
Select options This product has multiple variants. The options may be chosen on the product page
-70%
Add to compare

Shockwave Technologies Raptor F1 Forend for Remington 870/TAC 14

In stock

$9.99 – $44.62

The Shockwave Technologies Raptor F1 Forend is Made in America. With its enhanced texture, you gain a great hold on your firearm. Its glass-filled polymer construction is virtually indestructible. When you want to turn up your shotgun’s badass factor up to 11, reach for the Shockwave Raptor F1 forend. Cutting-edge design meets improved handling and fast target acquisition. A bolt-on replacement for your factory or aftermarket forend, the Shockwave F1 is available as a standalone forend, with an optional upper heat shield, and an optional forend installation tool— or any combination thereof.

  • Rugged glass-reinforced polymer
  • Lightweight
  • Extra length lets you personalize forward handhold
  • Ribbed inset area provides secure gripping
  • Front and rear handstops improve safety
  • A total of 10 M-LOK® slots for mounting lights, vertical grips, angled grips, Picatinny rails, and more
  • Optional upper heat shield prevents burns and offers rifle sights for fast target acquisition
  • Optional forend wrench simplifies and speeds installation
  • Compatible with Remington 870 12-gauge firearms and Remington Tac 14 12-gauge firearms
  • Veteran designed
  • Made in U.S.A.
Select options This product has multiple variants. The options may be chosen on the product page
-62%
Add to compare

Shockwave Technologies Raptor F1 Forend for Mossberg 500/590

In stock

$9.99 – $46.05

The Shockwave Technologies Raptor F1 Forend is Made in America. With its enhanced texture, you gain a great hold on your firearm. Its glass-filled polymer construction is virtually indestructible. When you want to turn up your shotgun’s badass factor up to 11, reach for the Shockwave Raptor F1 forend. Cutting-edge design meets improved handling and fast target acquisition. A bolt-on replacement for your factory or aftermarket forend, the Shockwave F1 is available as a standalone forend, with an optional upper heat shield, and an optional forend installation tool— or any combination thereof.

  • Rugged glass-reinforced polymer
  • Lightweight
  • Extra length lets you personalize forward handhold
  • Ribbed inset area provides secure gripping
  • Front and rear handstops improve safety
  • A total of 10 M-LOK® slots for mounting lights, vertical grips, angled grips, Picatinny rails, and more
  • Optional upper heat shield prevents burns and offers rifle sights for fast target acquisition
  • Optional forend wrench simplifies and speeds installation
  • Compatible with Mossberg 500/590 12-gauge firearms
  • Veteran designed
  • Made in U.S.A.
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Magpul M-LOK Rail Covers – Type 2

Out of stock

$20.65 – $23.88

M-LOK Type 2 Rail Covers are low-profile, two-piece covers that install directly onto most M-LOK aluminum hand guards (non-polymer). These M-LOK covers are non-orientation specific, which allows the user to mount them in any direction desired without affecting function. Not compatible with MAGPUL MOE M-LOK, MOE SL, and SGA forends, and may not be compatible with free-float handguards that have a wider and flatter profile, as they will not seat deep enough to allow the center portion to lock-in.

  • Includes six panels, each covering one M-LOK slot.
  • Made in the USA.
  • Non-orientation specific: No up / down, left / right, front / back orientation
  • Contact surfaces made up of TSP
  • Low Profile: Covers barely protrude more than 1/8″ above the rail surface
  • Simple install and uninstall: Using a simple, pointed tool, covers can be installed or uninstalled in seconds
Select options This product has multiple variants. The options may be chosen on the product page
-30%
Add to compare

Shockwave Technologies Raptor Grip for Mossberg 500 – Stealth Grey

Out of stock

Original price was: $29.95.Current price is: $20.98.

The Shockwave Technologies Raptor Grip is Made in America. With its enhanced texture, you gain a great hold on your weapon. Its glass-filled polymer construction is virtually indestructible.

This is a new style of bird’s head grip (aka birdshead grip aka witness protection grip aka chicken head grip aka border patrol grip aka entry-style grip aka bad ass grip) developed and manufactured by Shockwave Technologies, LLC in the U.S.A.

  • Unique angle of the Raptor Grip minimizes felt recoil, allowing maximum control shot after shot. It also just looks badass. Yes, mounting hardware and bolt hole plug are included. (Requires a 1/4″ hex wrench for installation, not included.)
  • Fits a variety of 12g and 20g shotguns
  • This is the 2nd generation model, includes bolt and bolt plug
  • Available in Black, Flat Dark Earth, Stealth Grey and OD Green.
View product