Used - Fair Condition

Clear filters
-21%
Add to compare

Open Box MagPod 3 Pack for Gen 2 MOE PMAGs – Black or FDE

Out of stock

Original price was: $24.95.Current price is: $19.76.
  •  Compatible with Gen2 MOE® (or older) PMAG®
  • Patented design
  • Durable 15% Glass Fiber reinforced PA6 material
  • Double injection molded TPU base-pad for improved traction on hard surfaces
  • 3-PACK in printed polybag
Select options This product has multiple variants. The options may be chosen on the product page
-7%
Add to compare

Open Box Magpul M-LOK MVG Vertical Grip

Out of stock

Original price was: $22.95.Current price is: $21.34.

The M-LOK MVG is a light weight, inexpensive vertical foregrip that attaches directly to M-LOK compatible hand guards and forends with no additional Picatinny rails required. Made from the same high quality polymer as other Magpul products, the M-LOK MVG uses the new Magpul TSP texture for positive control in all environments.

  • With rounded contours and a shorter length, it has been optimized for use with the “thumb break method” of shooting and can also be used as a traditional vertical foregrip.
  • All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.
  • Weight, w/hardware: 1.4 oz.
  • Length: 3.0″
  • Made in U.S.A.
Select options This product has multiple variants. The options may be chosen on the product page
-5%
Add to compare

Open Box True North Concepts GripStop – Standard Length for M-LOK

In stock

Original price was: $51.99.Current price is: $49.50.

Standard length GripStop for M-LOK Rails. Increased ergonomics and control on all M-LOK compatible firearms.

  • Fits the Magpul M-LOK mounting interface
  • Weight : 2 oz with hardware
  • Rugged 6061-T6 Aluminum construction
  • MilSpec Type III anodized finish

Note: Shades of FDE (Earth Brown) may vary due to the chemical process during the Type 3 Hardcoat.

Select options This product has multiple variants. The options may be chosen on the product page
-15%
Add to compare

Open Box Arisaka Defense Offset Scout Mount – M-LOK

Out of stock

Price range: $38.05 through $41.71

The Patent Pending Arisaka Offset Scout Mount is designed specifically for the Surefire Scout Light M600 and M300 series weapon lights, the Modlite PLH and OKW weapon lights, the Arisaka 300 and 600 Series Lights, the Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser), and Olight Odin. It replaces the stock Picatinny rail adapter with a low profile mount for M-Lok handguards. The Offset Scout Mount is very low profile at less than 0.20″ thick.

  • Weight: 0.4 oz
  • Length: 1.265”
  • CNC machined from 6061-T6 aluminum
  • MIL-A-8625 Type III hard coat anodized.
  • Requires an IP25/T25 and IP20/T20 Torx driver for installation (not included)
  • M620 series lights can also be used with the Offset Scout Mount with the addition of the Arisaka Offset M620 Adapter.
  • Includes necessary screws to attach light body to mount.
  • Made in the USA.
Select options This product has multiple variants. The options may be chosen on the product page
-28%
Add to compare

Open Box Cloud Defensive Light Control System for Streamlight ProTac Switch – LCSMK2

In stock

Price range: $50.19 through $64.87

The absolute best mounting solution for tape/pressure switches used to operate the Streamlight HLX ProTac Series Weaponlights. No more rubber bands. No more zip ties or wire or Velcro or duct tape. No more makeshift attachment methods that fail you. No more compromising with the light activation your life depends on.

  • The LCSmk2k features an “Early Exit” feature for the cables. This allows you to run the cable half-way through a given cable channel and then exit the bracket “early” if need more cable slack for a given setup.
  • The LCS Series Locks up 100% to your weapon. Zero movement. Zero play. Virtually indestructible.
  • Low-profile design with heavily radiused/chamfered edges ensure comfort and ergonomic function.
  • Weight with screws: 53 grams (1.9 oz)
  • Length: 3.5″
  • Width: 1.32″
  • Height: .575″ (switch sits .052″ above top edge of rail)
  • 100% MADE IN THE USA
Select options This product has multiple variants. The options may be chosen on the product page
-15%
Add to compare

Open Box Aero Precision Stripped Upper Receiver for AR-15

Out of stock

Price range: $76.45 through $88.34

The AR15 Stripped Upper Receiver is one of Aero’s most popular products. This stripped upper is precision machined to mil-spec M16/M4 specifications and features M4 feedramps

  • M4 Feedramps
  • .250 takedown pin holes
  • Made In America
  • Platform: AR15
  • Material: Machined from 7075-T6 forged aluminum
  • Compatibility: Works with standard AR15/M16 components
  • Weight(s): 6.9oz
Select options This product has multiple variants. The options may be chosen on the product page
-18%
Add to compare

Open Box Unity Tactical TAPS SYNC – Dual Pressure Switch

In stock

Price range: $121.20 through $147.80

TAPS (Tactical Augmented Pressure Switch) from TNVC and Unity Tactical is a complete one point command and control system for all weapon-mounted electronics. It provides low profile, dual-device control for lights and lasers. TAPS mounts directly to any industry standard rail, including M1913 Picatinny, KEYMOD, and M-LOK. No third party rail adapters are needed, keeping the weapon lighter and sleeker. It features two on-board buttons and two accessory leads.

Available in 4 button configurations, TAPS SYNC utilizes a patented double pole dome switch to fire both devices simultaneously on isolated circuits to protect your devices.

Select options This product has multiple variants. The options may be chosen on the product page
-36%
Add to compare

Open Box – Reptilia DOT Mount for Aimpoint MICRO / CompM5

In stock

Price range: $61.17 through $74.60

The DOT Mount is a lightweight, slim-line mounting solution for a variety of red dot optics. Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish, the DOT Mount attaches to any M1913 Picatinny rail, and offers lower 1/3 co-witness with standard AR15-style back-up sights. Its spring-loaded nitrided steel clamp and mounting bolt simplify the installation process, and sit flush with the body of the mount for a low-profile, anti-snag design. Available immediately in black for Aimpoint T-1/T-2 style optics, with Flat Dark Earth and Clear anodized versions shipping in late March. Additional heights and optic configurations coming soon!

  • Aimpoint – Micro R-1, H-1, H-2, T-1, T-2, CompM5
  • Sig – ROMEO4, ROMEO5
  • Vortex Optics – Sparc I & II
  • Primary Arms – Micro Dot & Advanced Micro Dot
  • Holosun Technologies – HS403
Select options This product has multiple variants. The options may be chosen on the product page
-22%
Add to compare

Open Box Reptilia DOT Mount for Aimpoint MICRO / CompM5 – 1.93″ Height

Out of stock

Original price was: $109.95.Current price is: $85.57.

The 1.93 DOT Mount™ by Reptilia is a lightweight, slim-line mounting solution for a variety of red dot optics. Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish, the 1.93 DOT Mount attaches to any M1913 Picatinny rail to place the optical axis at 1.93 inches above the rail. Its spring-loaded nitrided steel clamp and mounting bolt simplify the installation process, and sit flush with the body of the mount for a low-profile, anti-snag design.Like all Reptilia products, the DOT Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects

  • Aimpoint – Micro R-1, H-1, H-2, T-1, T-2, CompM5
  • Sig – ROMEO4 & ROMEO5
  • Vortex Optics – Crossfire, Sparc I & II
  • Primary Arms – Micro Dot & Advanced Micro Dot
  • Holosun Technologies – HS403 & HS503 Series
Select options This product has multiple variants. The options may be chosen on the product page
-8%
Add to compare

Open Box True North Concepts MHA – Modular Holster Adapter

Out of stock

Original price was: $82.50.Current price is: $75.55.

The Modular Holster Adapter was specifically designed to eliminate the unwanted movement, flex, and sliding common to factory polymer belt adapters.

  • The Modular Holster Adapter is made from rugged, non-ferrous DFARS grade 6061-T6 aluminum and is Type 3 MIL-SPEC hard coat anodized.
  • It supports the popular “Mid-ride” mode of carry to lower the pistol below the shooter’s belt line, allowing their holster system to clear body armor and pouches.
  • This adapter fits all “three-hole” pattern Safariland™ type holsters, and other brands of holsters that use this proven method of attachment.
  • It also supports the use of many commonly used quick detach holster systems such as the QLS, MLS, ELS, and others.
  • Holsters mounted to the Modular Holster Adapter will accommodate 10° of forward cant and 10° of negative cant for a total range of 20° degrees.
  • The adapter holds three height mounting points, set 1/2″ apart, descending from the top mid-ride mounting point.
Select options This product has multiple variants. The options may be chosen on the product page
-20%
Add to compare

Open Box Cloud Defensive M-LOK Light Control System, Mount for SureFire ST07 Tape Switch

In stock

Price range: $56.16 through $58.77
  • Unique Patented design utilizes a slot that ensures a snug, perfect friction-fit for the tape switch. Once installed its not coming out unless you want it to.
  • Precision CNC machined from Certified 6061 aluminum for superior strength.
  • Proprietary dual cable control channels machined into the one-piece mount.
  • Proprietary “Early Cable Exit” machined into each cable control channel. This allows you to only use part of the cable control channel should you need more slack in the cable to span across the handguard, et.
  • 100% MADE IN THE USA
Select options This product has multiple variants. The options may be chosen on the product page
-19%
Add to compare

Open Box Cloud Defensive Light Control System for SureFire ST07 – LCSMK1A

Out of stock

Price range: $40.56 through $64.87

The LCS Series. No more rubber bands. No more zip ties or wire or Velcro or duct tape. No more makeshift attachment methods that annoy you and fail you. No more compromising with the light activation your life depends on.

  • This LCSmk1 mount is designed for the Surefire ST07 Remote Tape Switch for Weapon lights. The same tape switch that is often supplied with the Surefire Scout series. The ST07 Tape Switch fits: SureFire Weapon Lights with plug sockets, including Millennium Universal, Classic Universal, Scout Light fitted with socketed tailcap, X300 and X400 with XT tailcap assembly.
  • When properly fitted with the SureFire socketed tail cap, this product is also compatible with the Arisaka Defense Scout Series lights.
Select options This product has multiple variants. The options may be chosen on the product page
-46%
Add to compare

Open Box Unity Tactical Hot Button – M-LOK

In stock

Price range: $64.71 through $99.02

Hot Button is a revolutionary control device for weapon-mounted electronic accessories. Developed out of a need to conserve rail-estate, improve actuation ergonomics, and mechanically integrate with weapon fore ends, Hot Button has successfully reinvented how you interface with your lights and lasers.

  • 45-degree angled button for an exponentially more comfortable press
  • Raised, crenelated bezel protects the button from accidental actuation
  • Overall footprint is much smaller than factory OEM pressure pads
  • Available for standard Surefire tail caps and standard Crane-Style laser ports
  • Available in dual leads configuration
Select options This product has multiple variants. The options may be chosen on the product page
-34%
Add to compare

Open Box Unity Tactical Hot Button – Rail Mount

In stock

Price range: $78.68 through $99.02

Hot Button is a revolutionary control device for weapon-mounted electronic accessories. Developed out of a need to conserve rail-estate, improve actuation ergonomics, and mechanically integrate with weapon fore-ends, Hot Button has successfully reinvented how you interface with your lights and lasers.

  • 45-degree angled button for an exponentially more comfortable press.
  • Raised, crenelated bezel protects the button from accidental actuation.
  • Overall footprint is much smaller than factory OEM pressure pads.
  • Available for standard Surefire tail caps and standard Crane-Style laser ports.
  • Hot Buttons come standard with 7″ cables.
Select options This product has multiple variants. The options may be chosen on the product page
-19%
Add to compare

Open Box Unity Tactical FAST LPVO Scope Mount

Out of stock

Original price was: $369.00.Current price is: $297.80.

FAST by Unity Tactical is a series of mounts and platforms that provide end-users with a quicker sight picture than standard height mounts. A taller optical centerline (mechanical) height provides faster/easier reticle acquisition while wearing electronic ear pro/communication headsets, night vision goggles, gas masks, and plate carriers that can impede a natural shooting position. It allows for more rapid visual processing of the battlefield by promoting a heads-up posture.

  • Places the scope’s mechanical centerline at 2.05” above the rail.
  • The FAST LPVO Scope Mount series addresses the above-mentioned issues for and the rising popularity of Low Power Variable Optics on the battlefield. The FAST LPVO Mount series is available in 30mm and 34mm variants to accommodate all popular commercial and military scopes.
  • This height provides all the advantages of a tall mount while still being compatible with Clip-On Night Vision Devices (CNVD).
  • Compatible with FAST Offset Base and FAST Plate Adapters.
Select options This product has multiple variants. The options may be chosen on the product page
-18%
Add to compare

Open Box Unity Tactical FAST Micro Mount

Out of stock

Price range: $162.44 through $167.32

FAST™ is a series of optic mounts and platforms that provide end users with a quicker sight picture than standard height mounts. A 2.26” optical centerline height provides faster/easier reticle acquisition while wearing electronic earpro/communications headsets, night vision goggles and gas masks.

  • Height: 2.26”
  • Weight: 3.0 oz.
  • Dimensions: 2.08″(L) x 1.30″(W) x 2.01″(H)
  • Material: 7075-T6 Aluminum
  • Finish: Type III Hardcoat
  • Built in rear BUIS (can be used with Unity Fusion Front sights)
  • Accepts American Defense QD Auto-Lock™
  • Compatibility: Aimpoint® Micro (H1, H2, T1, T2, CompM5) or optics with Aimpoint Micro footprint
Select options This product has multiple variants. The options may be chosen on the product page
-32%
Add to compare

Open Box Unity Tactical FAST Optics Riser – 2.26″ Height

Out of stock

Price range: $67.74 through $89.04

FAST™ is a series of optic mounts and platforms that provide end users with a quicker sight picture than standard height mounts. A 2.26” optical centerline height provides faster/easier reticle acquisition while wearing electronic earpro/communications headsets, night vision goggles and gas masks and allows for more rapid visual processing of the battlefield by promoting a heads-up posture. A heads-up posture also helps users maintain a neutral spine position which is more comfortable while wearing helmets, plate carriers, and other heavy gear.

  • Securely elevates block-type red dot optics with a standard lower 1/3 cowitness picatinny mount to a 2.26″ optical center line
  • For direct attachment of optics such as EOTech EXPS, Leupold LCO, Vortex UH-1, and other “lower 1/3” optics
  • Comes standard with a rail-grabber clamp. A Flip-Up Offset Backup Rear Iron Sight module can be purchased separately
  • Built from 7075-T6 Aluminum and Type III Hardcoat Anodized Black or FDE
  • FAST™ FTC Aimpoint Mag Mount sold separately
Select options This product has multiple variants. The options may be chosen on the product page