Used - Fair Condition

Add to compare

Open Box Badger Ordnance 30mm Scope Ring – Standard .823″

In stock

$142.92

The Badger Ordnance 30mm Standard Scope Rings are optimized for use with current 30mm optics and accommodate precision rifles with mid-weight barrel profiles.

  • Material: 6061 Aluminum Alloy
  • Finish: Anodized.
  • Diameter: 30mm
  • Center Height: 0.823″
  • Outer Height: 1.803″
  • Outer Width: 1.75″
  • Thickness: 0.625″
  • Mounting Platform: Picatinny
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Open Box Shockwave Technologies Raptor F1 Forend for Mossberg 500/590

In stock

$21.14 – $21.56

The Shockwave Technologies Raptor F1 Forend is Made in America. With its enhanced texture, you gain a great hold on your firearm. Its glass-filled polymer construction is virtually indestructible. When you want to turn up your shotgun’s badass factor up to 11, reach for the Shockwave Raptor F1 forend. Cutting-edge design meets improved handling and fast target acquisition. A bolt-on replacement for your factory or aftermarket forend, the Shockwave F1 is available as a standalone forend, with an optional upper heat shield, and an optional forend installation tool— or any combination thereof.

  • Rugged glass-reinforced polymer
  • Lightweight
  • Extra length lets you personalize forward handhold
  • Ribbed inset area provides secure gripping
  • Front and rear handstops improve safety
  • A total of 10 M-LOK® slots for mounting lights, vertical grips, angled grips, Picatinny rails, and more
  • Optional upper heat shield prevents burns and offers rifle sights for fast target acquisition
  • Optional forend wrench simplifies and speeds installation
  • Compatible with Mossberg 500/590 12-gauge firearms
  • Veteran designed
  • Made in U.S.A.
Select options This product has multiple variants. The options may be chosen on the product page
-43%
Add to compare

Open Box Shockwave Technologies Raptor Grip for Mossberg 500

In stock

$17.07 – $17.20

The Shockwave Technologies Raptor Grip is Made in America. With its enhanced texture, you gain a great hold on your weapon. Its glass-filled polymer construction is virtually indestructible.

This is a new style of bird’s head grip (aka birdshead grip aka witness protection grip aka chicken head grip aka border patrol grip aka entry-style grip aka bad ass grip) developed and manufactured by Shockwave Technologies, LLC in the U.S.A.

  • Unique angle of the Raptor Grip minimizes felt recoil, allowing maximum control shot after shot. It also just looks badass. Yes, mounting hardware and bolt hole plug are included. (Requires a 1/4″ hex wrench for installation, not included.)
  • Fits a variety of 12g and 20g shotguns
  • This is the 2nd generation model, includes bolt and bolt plug
  • Available in Black, Flat Dark Earth, Stealth Grey and OD Green.
Select options This product has multiple variants. The options may be chosen on the product page
-43%
Add to compare

Open Box Shockwave Technologies Raptor Grip for Remington 870 12-Guage Pump Action Shotgun Fixed Handle

In stock

$17.07 – $17.20

The Shockwave Technologies Raptor Grip is MADE IN AMERICA. With its enhanced texture, you gain a great hold on your weapon. Its glass-filled polymer construction is virtually indestructible.

This is a new style of bird’s head grip (aka birdshead grip aka witness protection grip aka chicken head grip aka border patrol grip aka entry-style grip aka bad ass grip) developed and manufactured by Shockwave Technologies, LLC in the U.S.A.

Select options This product has multiple variants. The options may be chosen on the product page
-30%
Add to compare

Open Box Shockwave Technologies Raptor F1 Forend for Remington 870/TAC 14

In stock

$17.55 – $33.62

The Shockwave Technologies Raptor F1 Forend is Made in America. With its enhanced texture, you gain a great hold on your firearm. Its glass-filled polymer construction is virtually indestructible. When you want to turn up your shotgun’s badass factor up to 11, reach for the Shockwave Raptor F1 forend. Cutting-edge design meets improved handling and fast target acquisition. A bolt-on replacement for your factory or aftermarket forend, the Shockwave F1 is available as a standalone forend, with an optional upper heat shield, and an optional forend installation tool— or any combination thereof.

  • Rugged glass-reinforced polymer
  • Lightweight
  • Extra length lets you personalize forward handhold
  • Ribbed inset area provides secure gripping
  • Front and rear handstops improve safety
  • A total of 10 M-LOK® slots for mounting lights, vertical grips, angled grips, Picatinny rails, and more
  • Optional upper heat shield prevents burns and offers rifle sights for fast target acquisition
  • Optional forend wrench simplifies and speeds installation
  • Compatible with Remington 870 12-gauge firearms and Remington Tac 14 12-gauge firearms
  • Veteran designed
  • Made in U.S.A.
Select options This product has multiple variants. The options may be chosen on the product page
-34%
Add to compare

Open Box Arisaka Defense Offset Optic Mount (Plate Only)

In stock

$16.59 – $23.61

The Patent Pending Arisaka Offset Optic Mount is a modular mounting solution that allows the user to select a 35 or 45 degree offset position for a red dot sight without requiring additional components. The 35-degree position brings the red dot sight up closer to slimmer, smaller scopes, while the 45-degree position provides additional clearance around wider turrets or larger, higher magnification scopes.

  • Designed to be attached to the top Picatinny rail of an AR15 rifle.
  • When the rifle is canted to make use of the offset red dot sight, the optic remains centered over the bore and maintains a lower 1/3 co-witness height.
  • The base and optic plates can be reversed, allowing for use on the left or right side.
Select options This product has multiple variants. The options may be chosen on the product page
-28%
Add to compare

Open Box Cloud Defensive Light Control System for Streamlight ProTac Switch – LCSMK2

In stock

$50.19 – $64.87

The absolute best mounting solution for tape/pressure switches used to operate the Streamlight HLX ProTac Series Weaponlights. No more rubber bands. No more zip ties or wire or Velcro or duct tape. No more makeshift attachment methods that fail you. No more compromising with the light activation your life depends on.

  • The LCSmk2k features an “Early Exit” feature for the cables. This allows you to run the cable half-way through a given cable channel and then exit the bracket “early” if need more cable slack for a given setup.
  • The LCS Series Locks up 100% to your weapon. Zero movement. Zero play. Virtually indestructible.
  • Low-profile design with heavily radiused/chamfered edges ensure comfort and ergonomic function.
  • Weight with screws: 53 grams (1.9 oz)
  • Length: 3.5″
  • Width: 1.32″
  • Height: .575″ (switch sits .052″ above top edge of rail)
  • 100% MADE IN THE USA
Select options This product has multiple variants. The options may be chosen on the product page
-20%
Add to compare

Open Box RS Regulate Bulgarian SAM7 Pattern Receiver End Cap

In stock

$33.54 – $35.20

Spare GKR compatible SAM series end cap for additional fitment options or swapping rails to a different host.

  • Includes bolt hardware
  • Minor fitting may be required
  • Material: Aircraft Grade Aluminum
  • Finish: Anodized
Select options This product has multiple variants. The options may be chosen on the product page
-23%
Add to compare

Open Box RS Regulate AKMT Trijicon MRO Mount

In stock

Original price was: $70.00.Current price is: $54.10.

The AKMT Trijicon MRO mount is designed to be used in conjunction with the AK-300 series lower mounts. The AK-300 Modular Side Mounts are the world’s first modular side rail system and allows users to change upper optic mounts as needed. In addition, users can adjust both over-bore and front-to-back position of the upper, ensuring their optic is perfectly placed.

Select options This product has multiple variants. The options may be chosen on the product page
-18%
Add to compare

Open Box Unity Tactical TAPS SYNC – Dual Pressure Switch

In stock

$121.20 – $147.80

TAPS (Tactical Augmented Pressure Switch) from TNVC and Unity Tactical is a complete one point command and control system for all weapon-mounted electronics. It provides low profile, dual-device control for lights and lasers. TAPS mounts directly to any industry standard rail, including M1913 Picatinny, KEYMOD, and M-LOK. No third party rail adapters are needed, keeping the weapon lighter and sleeker. It features two on-board buttons and two accessory leads.

Available in 4 button configurations, TAPS SYNC utilizes a patented double pole dome switch to fire both devices simultaneously on isolated circuits to protect your devices.

Select options This product has multiple variants. The options may be chosen on the product page
-22%
Add to compare

Open Box Reptilia DOT Mount for Aimpoint MICRO / CompM5 – 1.93″ Height

In stock

Original price was: $109.95.Current price is: $85.57.

The 1.93 DOT Mount™ by Reptilia is a lightweight, slim-line mounting solution for a variety of red dot optics. Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish, the 1.93 DOT Mount attaches to any M1913 Picatinny rail to place the optical axis at 1.93 inches above the rail. Its spring-loaded nitrided steel clamp and mounting bolt simplify the installation process, and sit flush with the body of the mount for a low-profile, anti-snag design.Like all Reptilia products, the DOT Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects

  • Aimpoint – Micro R-1, H-1, H-2, T-1, T-2, CompM5
  • Sig – ROMEO4 & ROMEO5
  • Vortex Optics – Crossfire, Sparc I & II
  • Primary Arms – Micro Dot & Advanced Micro Dot
  • Holosun Technologies – HS403 & HS503 Series
Select options This product has multiple variants. The options may be chosen on the product page
-46%
Add to compare

Open Box Unity Tactical Hot Button – M-LOK

In stock

$64.71 – $99.02

Hot Button is a revolutionary control device for weapon-mounted electronic accessories. Developed out of a need to conserve rail-estate, improve actuation ergonomics, and mechanically integrate with weapon fore ends, Hot Button has successfully reinvented how you interface with your lights and lasers.

  • 45-degree angled button for an exponentially more comfortable press
  • Raised, crenelated bezel protects the button from accidental actuation
  • Overall footprint is much smaller than factory OEM pressure pads
  • Available for standard Surefire tail caps and standard Crane-Style laser ports
  • Available in dual leads configuration
Select options This product has multiple variants. The options may be chosen on the product page