Color
- BlackBlack 66
- Flat Dark Earth (FDE)Flat Dark Earth (FDE) 17
- TanTan 2
- DDC (Desert Dirt Color)DDC (Desert Dirt Color) 3
Black w/ GoldBlack w/ Gold 1- OD GreenOD Green 4
- Urban GreyUrban Grey 2
- Wolf GreyWolf Grey 3
- Coyote BrownCoyote Brown 4
- Ranger GreenRanger Green 4
MulticamMulticam 4
Multicam AridMulticam Arid 3
Multicam BlackMulticam Black 4
Multicam TropicMulticam Tropic 3
WoodlandWoodland 2- Clear AnodizedClear Anodized 1
Used - Fair Condition
USED – Badger Ordnance 30mm Scope Ring – Standard .823″
In stock
$154.26The Badger Ordnance 30mm Standard Scope Rings are optimized for use with current 30mm optics and accommodate precision rifles with mid-weight barrel profiles.
- Material: 6061 Aluminum Alloy
- Finish: Anodized.
- Diameter: 30mm
- Center Height: 0.823″
- Outer Height: 1.803″
- Outer Width: 1.75″
- Thickness: 0.625″
- Mounting Platform: Picatinny
USED – Forward Controls Design OPF-M17/M18 Sig P320 Mounting Plate – ACRO
In stock
$48.14OPF-G, ACRO is a drop in adapter for superb Aimpoint ACRO sights. Compatible Slides:
- Civilian M17/M18
- Compact
- XCompact
- Legion
- Romeo1 Pro Cut
- DPP Pro Cut
- Pro Cut
- AXG Cut
USED – Arisaka Defense Hand Stop – M-LOK
Out of stock
$24.94The Patent Pending Arisaka Hand Stop is a continuation of Arisaka’s low-profile, minimal control accessories.
- Height: 1.3″
- Width: 0.625″ at widest point.
- Length: 1.4″
- Weight: 0.8 oz
- Material: CNC machined from 6061-T6 aluminum
- Finish: MIL-A-8625 Type III hard coat anodized
- Made in the USA.
USED – Arisaka Defense Inline Scout Mount – Picatinny
In stock
$31.65 – $32.83The Patent Pending Arisaka Inline Scout Mount (ISM) is designed for use with Surefire Scout Lights, the Modlite PLH and OKW weapon lights, the Arisaka 300 and 600 Series, and the Streamlight Protac Rail Mount lights. It replaces the stock Picatinny rail adapter with a low profile mount that tucks the light underneath either side of the B.E. Meyers MAWL laser/illuminator series. Three positions on the mount allow for different diameter light heads to clear the MAWL without interference.
- Length: 1.265″
- Thickness: 0.2″
- Weight: 0.6 oz
- CNC machined from 6061-T6 aluminum
- MIL-A-8625 Type III hard coat anodized.
- Made in the USA.
USED – Shockwave Technologies Raptor F1 Forend for Mossberg 500/590
In stock
$20.16 – $20.56The Shockwave Technologies Raptor F1 Forend is Made in America. With its enhanced texture, you gain a great hold on your firearm. Its glass-filled polymer construction is virtually indestructible. When you want to turn up your shotgun’s badass factor up to 11, reach for the Shockwave Raptor F1 forend. Cutting-edge design meets improved handling and fast target acquisition. A bolt-on replacement for your factory or aftermarket forend, the Shockwave F1 is available as a standalone forend, with an optional upper heat shield, and an optional forend installation tool— or any combination thereof.
- Rugged glass-reinforced polymer
- Lightweight
- Extra length lets you personalize forward handhold
- Ribbed inset area provides secure gripping
- Front and rear handstops improve safety
- A total of 10 M-LOK® slots for mounting lights, vertical grips, angled grips, Picatinny rails, and more
- Optional upper heat shield prevents burns and offers rifle sights for fast target acquisition
- Optional forend wrench simplifies and speeds installation
- Compatible with Mossberg 500/590 12-gauge firearms
- Veteran designed
- Made in U.S.A.
USED – Thyrm Swithcback DF Flashlight Ring
Out of stock
$14.25 – $15.53The SwitchBack® DF adds a multi-function finger ring and a robust pocket clip to SureFire’s Dual Fuel Series Flashlights.
- Reliably deploy and index a flashlight from both pockets and pouches, using the SwitchBack’s rigid, but releasable, retention ring.
- Shoot using a natural two-handed grip (the SwitchBack Technique).
- Employ all traditional low-light techniques such as Neck Index, Modified FBI, and Harries.
- Positively retain the light when drawing a firearm, reloading, and addressing a malfunction.
USED – Magpul B.A.D. Lever – Battery Assist Device for AR15/M4
Out of stock
$27.09Designed to considerably improve the speed and efficiency of the AR15/M16 bolt catch, the B.A.D. Lever quickly addresses reloading and malfunction clearance shortcomings of AR15/M16 platforms by extending a paddle to the right side of the weapon, allowing manipulation of the bolt stop from the fire control/ready position with the right-hand trigger finger. Made from milspec-anodized aluminum, the B.A.D. Lever attaches to the standard AR15/M16 bolt release without permanent modification to the weapon. Functional for both left and right-handed shooters, the B.A.D. Lever also allows traditional bolt catch manipulation according to the AR15/M16 manual of arms. All mounting hardware included.
- Compatible with standard mil-spec forged AR15/M16 receivers*
- Thin, anti-snag profile and textured surface still allows for traditional manipulation of the bolt catch while maintaining unobstructed access to the trigger
- Attaches to the existing bolt catch paddle via one screw
- Machined from durable billet 6061-T6 aluminum
- Finished with MIL-A-8625F, Type III, Class 2 hard anodizing with manganese phosphate on the screw per MIL-DTL-16232G
- Torx® mounting screw with Nyloc® Blue patch prevents back out under recoil (Torx wrench included)
- Made in U.S.A.
USED – POF USA 6 Position Anti-Tilt Buffer Tube
Out of stock
$46.12POF’s Mil-Spec 7075-T6 aircraft aluminum Anti-tilt Buffer Tube uses “carrier cradle” extensions to ensure that the carrier is always supported by the buffer tube, even when the bolt is forward. This prevents carrier-tilt and premature wear on the buffer tube. Thusly, the buffer-detent button doubles as a lock that stops the buffer tube from rotating and becoming loose under extreme operating conditions. POF-USA’s design also features three (3) extra drain holes for marine environments.
- Replacement Compatible with All P415 and P416 rifles with 6 position buffer tube.
USED – SureFire G2X Tactical Single Output 600 Lumen LED Flashlight
Out of stock
$53.78SureFire’s G2X™ LED illumination tools share many features, such as virtually indestructible high-efficiency LED emitters, 600 lumens of maximum output, precision reflectors, and sleek Nitrolon® polymer bodies. Their differences let you select the ideal light for your needs.
The G2X Tactical provides a single output level — a brilliant, penetrating 600-lumen beam. It features a lightweight, high-strength Nitrolon® polymer body that’s comfortable to hold in cold weather. The G2X Tactical comes with a press/click tailcap switch.
USED – Blue Force Gear Ten-Speed Triple M4 Mag Pouch
Out of stock
$47.54The Ten-Speed Triple M4 Mag Pouch holds three M4 magazines and is the perfect blend of speed and security. Ten-Speed® pouches use military grade elastic combined with ULTRAcomp™ laminate to create a multi-use pouch that weighs almost nothing and lays flat when not in use. The Triple M4 Mag Pouch holds three M4 magazines (polymer or metal), medical supplies, bandages, flashbangs, or other similar sized items.
- .125″ x 6″ x 6″
- 3 x 4 MOLLE field required
- Military-grade Ten-Speed® elastic front
- MOLLE compatible Helium Whisper® attachment system
- ULTRAcomp™ high-performance laminate
USED – CGS Group ‘The Official Qube’ Compensator for 1/2×28 Threads
Out of stock
$102.79- The Official Qube™ compensator is the first pistol compensator that doesn’t require set screws.
- Threads onto the barrel first and gets torqued down with a wrench.
- Comes in 1/2 x 28 threads to match the host firearm.
- OUNCES: 2.4
- LENGTH: 1.25″
- HEIGHT: 0.825”
- WIDTH: 1″
- MATERIALS: 17-4H900 Stainless Steel
USED – Esstac Double Pistol GAP KYWI Pouch
Out of stock
$24.31 – $27.45With A straight forward, user friendly and highly intuitive design the KYWI mag pouch is like no other. Utilizing a hybrid kydex and nylon design, you get all the rigidity you would expect from a kydex pouch and the lack of noise you want from a nylon pouch. These pouches feature a kydex wedge insert (KYWI) that provide the needed retention to secure your magazines without the need for bungee cord for rapid mag changes.
- This pouch features an added gap between the pouches to accommodate for magazine pouches with long base plates such as M&P, CZ, and Gen5 Glock magazines
- Fits double stack pistol magazines (Retention may vary for single stack)
- Glock26/27 or similar magazines will NOT work as they will be too short in height
- Hybrid kydex and nylon design
- Kydex wedge insert (KYWI) provides retention
- Requires mounting hardware
USED – Esstac 5.56 Single Midlength KYWI Pouch
Out of stock
$17.52 – $21.42With A straight forward, user friendly and highly intuitive design the single KYWI mag pouch is like no other. Utilizing a hybrid kydex and nylon design, you get all the rigidity you would expect from a kydex pouch and the lack of noise you want from a nylon pouch. These pouches feature a kydex wedge insert (KYWI) that provide the needed retention to secure your magazines without the need for bungee cord for rapid mag changes.
- This pouch is made for STANAG magazines: AR15/M4 style magazines
- AK magazines will NOT fit in this pouch
- Kydex wedge insert (KYWI) provides retention
- Pouch is 4.25″ tall
- Requires mounting hardware
USED – Esstac 5.56 Single KYWI Shorty Pouch
Out of stock
$20.00With A straight forward, user friendly and highly intuitive design the single KYWI mag pouch is like no other. Utilizing a hybrid kydex and nylon design, you get all the rigidity you would expect from a kydex pouch and the lack of noise you want from a nylon pouch. These pouches feature a kydex wedge insert (KYWI) that provide the needed retention to secure your magazines without the need for bungee cord for rapid mag changes.
- This pouch is made for STANAG magazines: AR15/M4 style magazines
- AK magazines will NOT fit in this pouch
- Kydex wedge insert (KYWI) provides retention
- Hybrid kydex and nylon design
- Pouch is 3.5″ tall
- Requires mounting hardware
USED – Esstac 5.56 Triple Tall KYWI Pouch
In stock
$42.20 – $54.34With A straight forward, user friendly and highly intuitive design the single KYWI mag pouch is like no other. Utilizing a hybrid kydex and nylon design, you get all the rigidity you would expect from a kydex pouch and the lack of noise you want from a nylon pouch. These pouches feature a kydex wedge insert (KYWI) that provide the needed retention to secure your magazines without the need for bungee cord for rapid mag changes.
- This pouch is made for STANAG magazines: AR15/M4 style magazines
- AK magazines will NOT fit in this pouch
- Hybrid kydex and nylon design
- Size: 5.25″ Tall x 9.25″ wide
- Requires mounting hardware
USED – MagPod 3 Pack for Gen 2 MOE PMAGs – Black or FDE
Out of stock
$15.49 – $17.88- Compatible with Gen2 MOE® (or older) PMAG®
- Patented design
- Durable 15% Glass Fiber reinforced PA6 material
- Double injection molded TPU base-pad for improved traction on hard surfaces
- 3-PACK in printed polybag
USED – Shockwave Technologies Raptor Grip for Mossberg 500
In stock
$17.07 – $18.62The Shockwave Technologies Raptor Grip is Made in America. With its enhanced texture, you gain a great hold on your weapon. Its glass-filled polymer construction is virtually indestructible.
This is a new style of bird’s head grip (aka birdshead grip aka witness protection grip aka chicken head grip aka border patrol grip aka entry-style grip aka bad ass grip) developed and manufactured by Shockwave Technologies, LLC in the U.S.A.
- Unique angle of the Raptor Grip minimizes felt recoil, allowing maximum control shot after shot. It also just looks badass. Yes, mounting hardware and bolt hole plug are included. (Requires a 1/4″ hex wrench for installation, not included.)
- Fits a variety of 12g and 20g shotguns
- This is the 2nd generation model, includes bolt and bolt plug
- Available in Black, Flat Dark Earth, Stealth Grey and OD Green.
USED – Shockwave Technologies Raptor Grip for Remington 870 12-Guage Pump Action Shotgun Fixed Handle
In stock
$17.07 – $19.06The Shockwave Technologies Raptor Grip is MADE IN AMERICA. With its enhanced texture, you gain a great hold on your weapon. Its glass-filled polymer construction is virtually indestructible.
This is a new style of bird’s head grip (aka birdshead grip aka witness protection grip aka chicken head grip aka border patrol grip aka entry-style grip aka bad ass grip) developed and manufactured by Shockwave Technologies, LLC in the U.S.A.
USED – Shockwave Technologies Raptor F1 Forend for Remington 870/TAC 14
In stock
$17.34 – $33.76The Shockwave Technologies Raptor F1 Forend is Made in America. With its enhanced texture, you gain a great hold on your firearm. Its glass-filled polymer construction is virtually indestructible. When you want to turn up your shotgun’s badass factor up to 11, reach for the Shockwave Raptor F1 forend. Cutting-edge design meets improved handling and fast target acquisition. A bolt-on replacement for your factory or aftermarket forend, the Shockwave F1 is available as a standalone forend, with an optional upper heat shield, and an optional forend installation tool— or any combination thereof.
- Rugged glass-reinforced polymer
- Lightweight
- Extra length lets you personalize forward handhold
- Ribbed inset area provides secure gripping
- Front and rear handstops improve safety
- A total of 10 M-LOK® slots for mounting lights, vertical grips, angled grips, Picatinny rails, and more
- Optional upper heat shield prevents burns and offers rifle sights for fast target acquisition
- Optional forend wrench simplifies and speeds installation
- Compatible with Remington 870 12-gauge firearms and Remington Tac 14 12-gauge firearms
- Veteran designed
- Made in U.S.A.
USED – Magpul M-LOK MVG Vertical Grip
Out of stock
$19.41The M-LOK MVG is a light weight, inexpensive vertical foregrip that attaches directly to M-LOK compatible hand guards and forends with no additional Picatinny rails required. Made from the same high quality polymer as other Magpul products, the M-LOK MVG uses the new Magpul TSP texture for positive control in all environments.
- With rounded contours and a shorter length, it has been optimized for use with the “thumb break method” of shooting and can also be used as a traditional vertical foregrip.
- All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.
- Weight, w/hardware: 1.4 oz.
- Length: 3.0″
- Made in U.S.A.
USED – True North Concepts GripStop – Picatinny Rail
Out of stock
$45.44The Picatinny Rail GripStop is back, and better than ever! This lightweight, (1.7 ounce) 6061 aluminum version of the legacy Gripstop is specifically designed for our Servicemen, and all common U.S. military issued small arms utilizing a 1913 Picatinny rail forearm.
- Rugged 6061 Aluminum
- Lightweight (1.7 ounces)
- Milspec anodized
- Corrosion resistant Black Nitride hardware
- Flat-tip screw head for mounting with a common screwdriver or multitool, no more hunting for an Allen wrench at the Armory!
- Works on all U.S. Issued firearms utilizing 1913 Picatinny rail.
Note: Shades of FDE (Earth Brown) may vary due to the chemical process during the Type 3 Hardcoat.
USED – True North Concepts GripStop – Standard Length for M-LOK
Out of stock
$40.26 – $46.58Standard length GripStop for M-LOK Rails. Increased ergonomics and control on all M-LOK compatible firearms.
- Fits the Magpul M-LOK mounting interface
- Weight : 2 oz with hardware
- Rugged 6061-T6 Aluminum construction
- MilSpec Type III anodized finish
Note: Shades of FDE (Earth Brown) may vary due to the chemical process during the Type 3 Hardcoat.
USED – IWC Haley Strategic Thorntail Scout Light Offset Mount
Out of stock
$35.46The THORNTAIL Adaptive Light Mount – Scout Light Mount is designed to accept Surefire M300/M600 Scout, Streamlight Rail Mount 1/2 & HL-X Weaponlights, and Backbone Replacement M300/M600 Scout Bodies and other Replacement M300/M600 Scout Bodies.
- Will attach to any 1913 Picatinny rail.
- Fully ambidextrous and provides 8 different mounting solutions.
- The cantilevered mounting design eliminates shadows in critical low or no light situations.
- Material: CNC machined from BILLET 6061-T6 aluminum.
- Finish: Black Anodized TYPE III to MIL-A-8625F.
- Manufacturer lifetime warranty.
- Made by Americans in the USA.
USED – Arisaka Defense Offset Optic Mount (Base Only)
Out of stock
$64.92 – $67.47The Patent Pending Arisaka Offset Optic Mount is a modular mounting solution that allows the user to select a 35 or 45 degree offset position for a red dot sight without requiring additional components. The 35-degree position brings the red dot sight up closer to slimmer, smaller scopes, while the 45-degree position provides additional clearance around wider turrets or larger, higher magnification scopes.
- Designed to be attached to the top Picatinny rail of an AR15 rifle.
- When the rifle is canted to make use of the offset red dot sight, the optic remains centered over the bore and maintains a lower 1/3 co-witness height.
- The base and optic plates can be reversed, allowing for use on the left or right side.
USED – Arisaka Defense Offset Optic Mount (Plate Only)
In stock
$16.00 – $21.41The Patent Pending Arisaka Offset Optic Mount is a modular mounting solution that allows the user to select a 35 or 45 degree offset position for a red dot sight without requiring additional components. The 35-degree position brings the red dot sight up closer to slimmer, smaller scopes, while the 45-degree position provides additional clearance around wider turrets or larger, higher magnification scopes.
- Designed to be attached to the top Picatinny rail of an AR15 rifle.
- When the rifle is canted to make use of the offset red dot sight, the optic remains centered over the bore and maintains a lower 1/3 co-witness height.
- The base and optic plates can be reversed, allowing for use on the left or right side.
USED – Arisaka Defense Low Profile Picatinny Rail – M-LOK
Out of stock
$26.12The Arisaka Low Profile Picatinny Rail is a 5 or 3 slot Picatinny rail for M-LOK handguard systems. It offers a reduced height to pull any Picatinny accessories closer to the handguard.
- Picatinny slots: 5 or 3
- Height over mounting surface: 0.277″
- Length: 2.15″ (5 slot), 1.37″ (3 slot)
- Weight: 0.7 oz (5 slot), 0.4 oz (3 slot)
- CNC machined from 6061-T6 aluminum and MIL-A-8625 Type III hard coat anodized.
- Requires an IP25/T25 Torx driver for installation (not included).
- Our M-LOK nuts are manufactured by Magpul.
- Made in the USA.
USED – Arisaka Defense Offset Scout Mount – M-LOK
Out of stock
$32.36 – $39.06The Patent Pending Arisaka Offset Scout Mount is designed specifically for the Surefire Scout Light M600 and M300 series weapon lights, the Modlite PLH and OKW weapon lights, the Arisaka 300 and 600 Series Lights, the Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser), and Olight Odin. It replaces the stock Picatinny rail adapter with a low profile mount for M-Lok handguards. The Offset Scout Mount is very low profile at less than 0.20″ thick.
- Weight: 0.4 oz
- Length: 1.265”
- CNC machined from 6061-T6 aluminum
- MIL-A-8625 Type III hard coat anodized.
- Requires an IP25/T25 and IP20/T20 Torx driver for installation (not included)
- M620 series lights can also be used with the Offset Scout Mount with the addition of the Arisaka Offset M620 Adapter.
- Includes necessary screws to attach light body to mount.
- Made in the USA.
USED – Arisaka Defense Offset Scout Mount M-LOK – MCX
Out of stock
$35.53The Arisaka Offset Scout Mount is designed to replace the stock Picatinny rail adapter with a low-profile mount for the SIG MCX Virtus M-LOK handguards.
- Length: 1.265″
- Weight: 0.6 oz
- Machined from 6061-T6 aluminum
- MIL-A-8625 Type III hard coat anodized
- Includes necessary screws to attach light body to mount
USED – Arisaka Defense Side Scout Mount Picatinny (SSM-P)
Out of stock
$35.53The Arisaka Side Scout Mount (SSM) is designed for use with Surefire Scout Lights, the Arisaka 300 and 600 Series, and the Streamlight Protac Rail Mount lights. It replaces the stock Picatinny rail adapter with a low profile mount that tucks the light underneath either side of the ATPIAL laser/illuminator series, including the ATPIAL-C, AN/PEQ15, and LA-5/PEQ. It will also allow the light to clear the QD lever on the Steiner DBAL I2, A3, and D2.
Light Compatibility:
- Surefire M300A. M300B, M300C, M600B, M600C, M600P, M600U, M600V, M600DF,
- Streamlight Protac Rail Mount 1, 2 and HL-X
- Arisaka 300 and 600 Series.
USED – Arisaka Defense Inline Scout Mount – M-LOK
Out of stock
$29.62 – $30.82The Patented Arisaka Inline Scout Mount is designed specifically for the Surefire Scout Light M600 and M300 series weapon lights, the Arisaka 300 and 600 Series Lights, and the Streamlight Protac Rail Mount 1, 2, and HL-X. It replaces the stock Picatinny rail adapter with a low-profile mount for M-Lok handguards. The mount is especially useful on handguards that feature 45-degree angle mounting flats, such as the BCM MCMR, Geissele Automatics SMR MK4 and MK8, Daniel Defense MFR, KAC URX4, ALG Defense EMR, MI Gen 3, Mega MML, and Mega/Hodge Wedge Lock.
- Length: 3.0”
- Height: 0.20″ (at Surefire Scout Light mounting point)
- Weight: 0.6 oz
- Material: 7075-T6 aluminum
- Finish: Type III Hard Coat Anodized Black, FDE, and Tan
- Made in the USA
USED – Cloud Defensive Torrent Offset M-LOK Mount
In stock
$42.19 – $43.13The Cloud Defensive “Torrent series”. Manufactured by Impact Weapons Components in conjunction with Haley Strategic Partners. Strong and versatile light mounts.
- For use with Cloud Defensive REIN, Modlite PLHv2 and OKW, Surefire M300, M600 Scout (except M600 AA), Streamlight Protac Rail Mount 1, 2, and all replacement M300 and M600 bodies, including backbone and M-LOK® compliant rails.
- 6 light mounting positions provide .626” of lateral adjustment to clear all laser aiming devices
- Positions the light as close to the firearm bore or APITAL as possible
- Light offset optimized at a 45 degree offset for ergonomic activation
- Ambidextrous with 6 total mounting solutions on 3 sided M-LOK® rail system
- Low profile, lightweight and does not impede weapons manipulation
- Mount does not interfere with the operation of front back-up iron sights
USED – Cloud Defensive Light Control System for Streamlight ProTac Switch – LCSMK2
In stock
$50.88 – $58.69The absolute best mounting solution for tape/pressure switches used to operate the Streamlight HLX ProTac Series Weaponlights. No more rubber bands. No more zip ties or wire or Velcro or duct tape. No more makeshift attachment methods that fail you. No more compromising with the light activation your life depends on.
- The LCSmk2k features an “Early Exit” feature for the cables. This allows you to run the cable half-way through a given cable channel and then exit the bracket “early” if need more cable slack for a given setup.
- The LCS Series Locks up 100% to your weapon. Zero movement. Zero play. Virtually indestructible.
- Low-profile design with heavily radiused/chamfered edges ensure comfort and ergonomic function.
- Weight with screws: 53 grams (1.9 oz)
- Length: 3.5″
- Width: 1.32″
- Height: .575″ (switch sits .052″ above top edge of rail)
- 100% MADE IN THE USA