Used - Good Condition

The SYNC/01 is a cutting edge Trijicon RMR mount for Benelli shotguns. Enhance the effectiveness of your shotgun with the speed and precision of a red dot sight, while maintaining it’s factory shooting ergonomics.

• Materials: 7075-T6 Aluminum + 4140H Steel
• Finishes: Type III Hard Anodizing + Black Oxide
• Weight: 0.54oz (15.2g)
• Made In USA: Lifetime Warranty

B5 Systems Collapsable Precision Stock gives the shooter full mobility by making the stock’s cheek riser and butt-pad adjustable.

• 2 QD sling slots.
• 2 M-LOK slots.
• Locking adjustment lever.
• Internal tensioners removes rattle.
• Sturdy polymer construction.
• For AR-15 build.
• Weight: 25.65 oz.

The Xeno Flash Hider works superbly as a stand-alone muzzle device, but really shines when paired with the Xeno Adapter equipped suppressor.

• Excellent suppressor host
• Caliber: 5.56 / .223
• Thread Pitch: 1/2×28
• Material: 4140 steel
• Finish: Black Nitride
• Length: 2.16″
• Weight: 3.2 oz.

The Cherry Bomb by Q is a Quickie Fast-Attach muzzle brake compatible with the THUNDER CHICKEN and trash PANDA silencers by Q. It features our taper mount shoulder to align with our barrels and silencers, uses a 1/2 inch socket on the front for easy install and removal, and features 360° circumferential ports to alleviate the need for timing and shims. Backward compatible with standard 90 degree shouldered barrels.

• Weight: 2.0 oz.
• Overall Length: 1.64 inches
• Material: 17-4 Stainless Steel
• Length Added to Barrel: 0.8 inches

For Aimpoint T1 and T2 optics. Also fits Holosun’s with side turret battery (Note- Holosun side Battery Tray versions will be Lower 1/3rd CW with this mount.)

• Available in Absolute Co-Witness, Lower 1/3rd, and 1.93″ Height
• 7075 Aircraft Grade Aluminum
• Mil-Spec Hardcoat Anodize
• Fits all Picatinny Receiver/ Rails
• Hardware Included
• Ultra-strong with built-in recoil lugs.
• Precision Return to Zero mount

HELIX 9.5″ MLOK Handguard

• 9.5″ Exact top rail length
• 7.1 oz. with barrel nut and hardware
• Excellent feel for todays modern shooters
• MLOK accessory compatible
• 4 Built in QD swivel mounting points front and rear on right and left side
• No timing of barrel nut required, no shims needed
• Works with any receiver forged or billet
• ​1.35″ ID
• Mil-Spec Hardcoat Anodize
• 7075 Barrel nut w/ Hardcoat Anodize
• Melonite Finish Hardware
• Free Floating Design
• Proven Slip fit locking mount design, much more secure than a clamp type mount.
• Billet Anti Rotation Insert (black insert included)
• Proven Anti Slip Design keys into barrel nut
• Barrel nut uses standard wrenches or SLR Billet wrench for perfect fit
• Mil-Spec 1913 Mounting rails

The AKM 30mm Modular Ring is designed to be used in conjunction with the AK-300 series lower mounts. The AK-300 Modular Side Mounts are the world’s first modular side rail system and allows users to change upper optic mounts as needed. In addition, users can adjust both over-bore and front-to-back position of the upper, ensuring their optic is perfectly placed.

TGF (Trigger Guard, Forward Controls) is designed for use with TDP spec forged lower receivers, and fills the gap forward of the pistol grip, between the trigger guard “ears”. The winter version has as much constant/unchanged space from the trigger bow forward as possible (instead of the space inside tapering and decreasing as the trigger guard nears the receiver’s front trigger guard holes).

• Available in anodized black, desert tan, and OD green.
• Lower receivers made from Cerro Forge “keyhole” forgings generally have taller trigger guard ears, as do Colt, LMT, and BCM lower receivers.
• Please note ZEV produced lower receivers appear to have shorter trigger guard ears, and these shortened ears expose a bit of the bottom of the TGF, as shown below. This has no bearing on functionality. The latest Mega lowers (with the old Mega atomic whirl) has been reported to have long ears that do cover the TGF.
• TGF is proudly designed and made in the USA. A trigger guard roll pin and set screw (for the front) are included. A 1/16 Allen wrench is required (not included).
• TGF is machined from 7075 aluminum.

ESF (End plate, Sling Adapter, Forward Controls Design) is a drop-in end plate replacement for the AR platform (both 223 and 308 specs) featuring 3 QD swivel sockets.

• Machined from 4140 steel.
• Weight: 1.1 oz.
• 3 QD swivel sockets.
• Made in the USA.

The ABC/R is an angled paddle that makes it easier for the palm or thumb to access. FB (forward biased) is for right-hand users who wrap their left hand around the magazine well and use their left thumb to press the bolt catch’s upper paddle. The FB version has the upper-paddle shifted to the muzzle end to facilitate this reloading method.

• Machined from billet 8620 alloy steel.
• Heat-treated with black DLC finish.
• Proudly designed and made in the USA.
• Limited to one (1) per customer due to very high demand.

The Super Charging Handle by Geissele Automatics is 3D machined from a solid block of aircraft-grade 7075-T6 aluminum. Its ambidextrous design allows for seamless operation from either side of the weapon.

• Dual contoured similar to that of the charging handle of an M14, where not only the x-axis but also the y-axis receive radius cuts.
• Handling surface of the lever is checkered, adding a textured grip aiding to the use when operating with gloves.
• Heightened rear lip of the SCH aids in mitigating gas blowback to the shooter when shooting with short barreled and suppressed weapon systems.
• All parts are Type 3 Hardcoat anodized and are available in black and DDC (Desert Dirt Color).

The Super Precision MRO Series was developed specifically to work with the Trijicon MRO and like mounted red dot optics.

• Mounts are precision machined from a single piece of 7075-T6 high strength aluminum
• Available in co-witness, lower third co-witness and 1.93″ options