AR-10 / LR-308 / SR-25

Crisp, clean, lightweight, safe, and unbelievably short reset. As the name suggests, it’s Literally The Best Trigger Ever Made.

• Platform: AR-15, AR-10, Honey Badger
• Type: 2 Stage
• Adjustable: No
• Weight: 1.9 oz

The M-LOK MVG is a light weight, inexpensive vertical foregrip that attaches directly to M-LOK compatible hand guards and forends with no additional Picatinny rails required. Made from the same high quality polymer as other Magpul products, the M-LOK MVG uses the new Magpul TSP texture for positive control in all environments.

• With rounded contours and a shorter length, it has been optimized for use with the “thumb break method” of shooting and can also be used as a traditional vertical foregrip.
• All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.
• Weight, w/hardware: 1.4 oz.
• Length: 3.0″
• Made in U.S.A.

The Arisaka Vertical Grip is a robust, minimal grip for M-Lok handguards. It features a radiused profile at the top which tapers to meet the mounting surface on the handguard, giving a low-profile feel and ergonomic comfort. Twin mounting screws ensure secure attachment. The grip is hollow, with no end-cap.

• Height: 2.50”
• Width: 1.30”
• Weight: 1.80oz
• CNC machined from 6061-T6 aluminum and MIL-A-8625 Type III hard coat anodized
• Requires a 3/32” Allen wrench for installation (not included)
• Made in the USA

The Patent Pending Arisaka Offset Picatinny Mount is a combination of our Offset Scount Mount and Picatinny adapter, and is meant for use with Picatinny based lights like the Surefire X300 or Inforce WML, plus other rail mounted accessories.

• Length: 1.77″
• Height: 0.20″ (at Surefire Scout Light mounting point)
• Weight: 1.0 oz
• The mount is CNC machined from 6061-T6 aluminum and MIL-A-8625 Type III hard coat anodized
• Requires a 5/64″ Allen wrench for installation (not included).
• Made in the USA

The Arisaka Aimpoint Micro Mount is designed for the Aimpoint Micro T1 and T2 optics, and will also function with other red dots using the same footprint.

• Material: CNC machined from 7075-T6 aluminum.
• Finish: Type III hard-coat anodizing.
• Weight (including screws): 3.1 oz
• Picatinny clamp – 50 inch-lbs (5.7 Nm)
• Made in the USA

The Patent Pending Arisaka Offset Scout Mount is designed specifically for the Surefire Scout Light M600 and M300 series weapon lights, the Modlite PLH and OKW weapon lights, the Arisaka 300 and 600 Series Lights, the Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser), and Olight Odin. It replaces the stock Picatinny rail adapter with a low profile mount for M-Lok handguards. The Offset Scout Mount is very low profile at less than 0.20″ thick.

• Weight: 0.4 oz
• Length: 1.265”
• CNC machined from 6061-T6 aluminum
• MIL-A-8625 Type III hard coat anodized.
• Requires an IP25/T25 and IP20/T20 Torx driver for installation (not included)
• M620 series lights can also be used with the Offset Scout Mount with the addition of the Arisaka Offset M620 Adapter.
• Includes necessary screws to attach light body to mount.
• Made in the USA.

The Arisaka Side Scout Mount (SSM) is designed for use with Surefire Scout Lights, the Arisaka 300 and 600 Series, and the Streamlight Protac Rail Mount lights. It replaces the stock Picatinny rail adapter with a low profile mount that tucks the light underneath either side of the ATPIAL laser/illuminator series, including the ATPIAL-C, AN/PEQ15, and LA-5/PEQ. It will also allow the light to clear the QD lever on the Steiner DBAL I2, A3, and D2.

Light Compatibility:

• Surefire M300A. M300B, M300C, M600B, M600C, M600P, M600U, M600V, M600DF,
• Streamlight Protac Rail Mount 1, 2 and HL-X
• Arisaka 300 and 600 Series.

The Patented Arisaka Inline Scout Mount is designed specifically for the Surefire Scout Light M600 and M300 series weapon lights, the Arisaka 300 and 600 Series Lights, and the Streamlight Protac Rail Mount 1 and 2. It replaces the stock Picatinny rail adapter with a low profile mount for KeyMod handguards.

• Length: 3.0”.
• Height: 0.20″ (at Surefire Scout Light mounting point).
• Weight: 0.5 oz.
• Material: CNC machined from 7075-T6 aluminum.
• Finish: MIL-A-8625 Type III hard coat anodized.
• BCM KeyMod screws are covered under US Patent 9377274.
• Includes necessary screws to attach light body to mount.
• Made in the USA.

Upon introduction of the M16 in the 1960s the manual of arms for shooting positions included a bladed stance with an extended elbow on the fire control side. Because of numerous changes in the dynamics of the current fighting techniques we now virtually square off with the bad guy when engaging the target. The Gun Fighter’s Grip by BCM allows for a reduced angle and improved ergonomics when shooting in the modern gun fighting stances.

• Reduced angle for improved ergonomics
• Hinged trap door offering storage inside the grip with a water-resistant rubber gasket
• Each grip includes both an extended modular insert to close the gap between the trigger guard and pistol grip, and a smooth modular insert for use with some rifles with larger built-in trigger guards. (user can decide which one to install)
• Made in the USA and manufactured from high-quality impact resistant polymers.
• Test fit to ensure proper function (may display attributes consistent with this QC process)

MFT Battlelink™ Extreme Duty Minimalist Stock is built based on MFT’s popular Minimalist Stock platform. Recognizing the need for a more robust stock capable of withstanding long-term abuse delivered by larger caliber firearms such as tactical shotguns of 12 gauge or 7.62X51 AR-10 while remaining nimble enough for use on a 5.56.

• Weight: 8.5oz.
• Height: 4.85″
• Width: 1.59″
• Length: 7.71″
• Slide-on replacement for collapsible buttstock.
• Angled non-slip rubberized removable buttpad allows faster presentation.
• Multiple Sling Slots with single point mount points.
• Quick Detach Sling mounting point is positioned in the rear.
• Upper section provides enhanced cheek weld.
• A single MLOK connection point.
• Modular Buffer Tube Plunger System, reinforced with a metal chassis.

The MOE SL Stock – Mil-Spec Model (MOE Slim Line) is a drop-in replacement buttstock for AR15/M4 carbines using Mil-Spec sized receiver extension tubes. Designed for the modern battlefield, the sleek profile, dual-side release latches, rolled toe, and angled rubber butt-pad are optimized for use with body armor or modular gear and provides for efficient shoulder transitions.

• Platform: AR-15, M4, M16, AR-10, LR-308, SR-25
• Compatibility: Mil-Spec extension tube (not included)
• Material: Polymer
• LOP, M4 Collapsed ~10.8 in.
• LOP, M4 Extended ~14.1 in.
• LOP Adjustment Range 3.3 in.
• Length, max 7.2 in.
• Weight 9.6 oz.

Aero took a whole new approach when designing their Enhanced Carbine Buffer Tube by including features like carrier support extensions, position guide drain holes, and ramping the design of the tube.

• Material: 7075-T6 Aluminum
• Fully supports and guides the bolt carrier group into the buffer tube after a round is fired, preventing carrier tilt and unnecessary wear on key components.
• Ramped Tube Design allows for effortless installation of traditional carbine stocks.
• Simply hold down the adjustment piece and push your stock onto the Enhanced Buffer Tube.
• These features add reliability, security, and simplicity that traditional mil-spec buffer tube options historically overlook.

The most natural grip for taking a squared-off stance. Your hand will naturally find its optimal position on the B5 Systems Type 23 P-Grip, thanks to its steep angle, extended tang, and palm-filling design. By ensuring proper trigger finger placement, this grip has been shown to improve shooting speed while correcting for any tendency to drift into a “chicken-wing” arm placement.

• Most up to date design featuring all-new aggressive texturing
• Constructed of durable composite
• Drop-in upgrade
• Weighs 2.40 Ounces