AR-15 / M4 / M16

Dead Air Armament Xeno Muzzle Brake – (1/2×28)

Out of stock

~~$89.00~~ Original price was: $89.00.$85.30Current price is: $85.30.

View product

-42%

B5 Systems Collapsible Precision Stock for AR-15

Out of stock

$134.20 – $218.50

Select options This product has multiple variants. The options may be chosen on the product page

-4%

Dead Air Armament Xeno Flash Hider – (1/2×28)

Out of stock

~~$89.00~~ Add to cart to see price

View product

-3%

Magpul QDM Quick Disconnect Sling Mount

Out of stock

~~$29.95~~ Original price was: $29.95.$29.16Current price is: $29.16.

The Magpul QDM is a heavy-duty upgrade to standard push-button quick detach sling swivels.

Weight: 0.7 oz.
For 1-1/4″ webbing.
High strength bale that rotates freely.
Lower profile sling swivel that offers one-handed manipulation.
Made in the USA.

View product

Magpul ASAP Ambidextrous Sling Attachment Point End Plate

Out of stock

~~$33.95~~ Original price was: $33.95.$32.25Current price is: $32.25.

The ASAP allows a range of motion greater than 180 degrees and enables true ambidextrous weapon manipulation.

Replaces the standard AR15/M4 carbine stock receiver endplate.
Minimizing sling snagging.
Works with one-point type slings.
Made from precision cast black manganese phosphatized steel.
Made in the USA.

View product

Forward Controls Design SCP Carrier Cam Pin – Dimpled Witness Mark, Nitride

Out of stock

$13.33

SCP features a machined dimple on one side of the carrier cam pin, so the user can always reinstall the cam pin on the carrier in the same orientation.

Dimple ensures consistent installation.
Durable nitride finish.
Reduces wear on cam pin and bolt.

View product

Forward Controls Design EMR-H-S Enhanced Mag Release Button – Milspec Hole, Serrated

Out of stock

$17.56

FCD’s EMR-H is a mag release that increases the usable surface area while retaining the same footprint as a factory mag release.

0.02″ taller than the factory magazine release button.
Very effective horizontal serrations.
Machined from 4140 Steel.
QPQ coated.
Proudly made in the USA.

View product

Forward Controls Design EMR-H-AA Enhanced Mag Release Button – Milspec Hole, Dimpled

Out of stock

$17.56

FCD’s EMR-H is a mag release that increases the usable surface area while retaining the same footprint as a factory mag release.

0.02″ taller than the factory magazine release button.
Very effective all-angle dimples.
Machined from 4140 Steel.
QPQ coated.
Proudly made in the USA.

View product

Forward Controls Design ASF Ambidextrous Selector – Q Lever, Standard/Short

Out of stock

~~$83.00~~ Original price was: $83.00.$78.85Current price is: $78.85.

ASF was designed from the ground up to be a defense/duty/combat safety selector, its mission is quite aptly reflected by the way its levers are attached to the center, via a stainless steel roll pin.

Includes 1 short-throw lever and 1 standard lever.
ASF-50 is a short-throw rotate to 50 degrees.
ASF-90 is a conventional rotation to 90 degrees.
Centers are billet machined in 8620 and heat treated and black nitrided.
Levers are billet machined in 8620 and are black nitrided.

Select options This product has multiple variants. The options may be chosen on the product page

-20%

Forward Controls Design EMR Ambidextrous Mag Release – Serrated

Out of stock

~~$70.00~~ Original price was: $70.00.$56.34Current price is: $56.34.

EMR-A is a long in development ambidextrous magazine release for .223 and .308 AR receivers. The placement of its lever is well thought out to closely mirror the magazine release button on the right side.

Made from CNC machined 4140 steel.
Black Nitride coated.
Lever 7075 aluminum and Type 3 hard coat anodized.
The roll pin has a shear strength of 800lbs.
Made in the USA.

View product

Forward Controls Design EMR Ambidextrous Mag Release – Dimpled

Out of stock

~~$70.00~~ Original price was: $70.00.$66.50Current price is: $66.50.

Made from CNC machined 4140 steel.
Black Nitride coated.
Dimpled texture allows all angle resistance.
Lever 7075 aluminum and Type 3 hard coat anodized.
The roll pin has a shear strength of 800lbs.
Made in the USA.

View product

Forward Controls Design ESF End Plate – 3 Sockets

Out of stock

$57.00 – $62.70

ESF (End plate, Sling Adapter, Forward Controls Design) is a drop-in end plate replacement for the AR platform (both 223 and 308 specs) featuring 3 QD swivel sockets.

Machined from 4140 steel.
Weight: 1.1 oz.
3 QD swivel sockets.
Made in the USA.

Select options This product has multiple variants. The options may be chosen on the product page

Forward Controls Design ESF End Plate – 1 Socket

Out of stock

$42.75 – $48.45

ESF-H1 is a drop-in end plate replacement for the AR platform and has a single rear-facing QD swivel socket.

Machined from 4140 steel.
1 QD swivel socket.
For AR-15/AR-10.
Socket has no limiters.
Made in the USA.

Select options This product has multiple variants. The options may be chosen on the product page

Geissele Automatics Premium Milspec Buffer Tube 7075

Out of stock

$65.00 – $75.00

The Geissele Premium Mil-Spec Buffer Tube is a rigid and durable buffer tube that conforms to all mil-spec standards.

Machined from quality 7075-T6 Aluminum.
Finished in Type 3 Hardcoat Anodize.
Features 6 stock positions.
Weight: 3.7oz.
Castle nut and end plate included.
Made in the USA.

Select options This product has multiple variants. The options may be chosen on the product page

Forward Controls Design RHF M-LOK Handguard – 15″

Out of stock

~~$215.00~~ Original price was: $215.00.$188.66Current price is: $188.66.

RHF (Railed Handguard, Forward Controls) is based on the superb CMT UHPR Mod2, with full-length 1913 rails at 12 o’clock, and MLOK at 3, 6, and 9 o’clock.

Machined from 6000 series extruded aluminum.
Barrel nut machined from 7075 aluminum.
Type 3 anodized
Weight: 12.35oz
Barrel nut torque: milspec 40-70ft/lbs.
Rail clamp screws torque: 45 inc/lbs.

Select options This product has multiple variants. The options may be chosen on the product page

Forward Controls Design RHF M-LOK Handguard – 9.5″

Out of stock

~~$195.00~~ Original price was: $195.00.$171.59Current price is: $171.59.

RHF (Railed Handguard, Forward Controls) is based on the superb CMT UHPR Mod2, with full-length 1913 rails at 12 o’clock, and MLOK at 3, 6, and 9 o’clock.

Machined from 6000 series extruded aluminum.
Barrel nut machined from 7075 aluminum.
Type 3 anodized
Weight: 9.02oz
Barrel nut torque: milspec 40-70ft/lbs.
Rail clamp screws torque: 45 inc/lbs.

Select options This product has multiple variants. The options may be chosen on the product page

-3%

Cloud Defensive Light Control System for Streamlight ProTac Switch – LCSMK2, Polymer

Out of stock

$44.99 – $52.79

Select options This product has multiple variants. The options may be chosen on the product page

Forward Controls Design Pivot and Takedown Pins

Out of stock

~~$35.00~~ Original price was: $35.00.$33.25Current price is: $33.25.

PF-040 (Pins, Forward Controls, 0.040) is a set of elegantly simple, and superbly crafted AR15/M16 pivot and takedown pins.

Machined from 17-4 PH SS bar stock
QPQ finished
Made in the USA

View product

KynSHOT AR 9mm Buffer – RB5007

Out of stock

~~$154.99~~ Original price was: $154.99.$134.99Current price is: $134.99.

The RB5007, a specially engineered KynSHOT for the 9mm PCC application, is designed to work in PCC builds with 3.5″ – 16″ barrels, either suppressed or unsuppressed and with all common 9mm loads.

Drop-In Replacement
Reduce felt recoil
Improve reliability
Reduce bolt carrier speed
Reduce wear on parts
Reduce shock and vibration to optics
Suppress bolt bounce
Decrease sight movement
Smoother operation
Faster shot recovery time
Military-grade materials and manufacturing
Weight: 6.0 Ounces.
Length when Compressed: 3.90”.
Mil-Spec Hydraulic Fluids and Seals – Ambient operating temp certified for -30F – +150F.
High strength 17-4 Stainless Steel construction throughout the unit, making it virtually impervious to corrosion.

View product

KynSHOT AR-15 Rifle Buffer – RB5001

Out of stock

~~$159.99~~ Original price was: $159.99.$139.99Current price is: $139.99.

The KynSHOT RB5001 Recoil Buffer, designed for Fixed Stock AR-15s, is a proven system that has seen heavy use with civilian competition shooters, law enforcement personnel, and the United States Armed Forces.

Drop-In Replacement
Reduce felt recoil
Improve reliability
Reduce bolt carrier speed
Reduce wear on parts
Reduce shock and vibration to optics
Suppress bolt bounce
Decrease sight movement
Smoother operation
Faster shot recovery time
Military-grade materials and manufacturing
Weight: 8.3 Ounces.
Length when Compressed: 5 7/8″.
High strength 17-4 Stainless Steel construction throughout the unit, making it virtually impervious to corrosion.

View product

-11%

CMMG MK4 Ambidextrous Charging Handle

Out of stock

~~$79.95~~ Original price was: $79.95.$70.94Current price is: $70.94.

CMMG’s ambidextrous charging handle is designed to improve the operation of your AR. Gross motor skill operation, gloved operation, or just trying to get ahold of your latch with an optic mounted are all greatly improved by CMMG’s larger latch design. The ambidextrous latches allow for easy operation no matter which hand you use to charge the weapon.

Standard AR Upper Receiver fitment
7075 Aluminum
Ambidextrous Handles
Oversized Handles

View product

KynSHOT AR-15 Carbine Buffer – RB5000HP

Out of stock

~~$149.99~~ Original price was: $149.99.$131.59Current price is: $131.59.

The KynSHOT RB5000HP Recoil Buffer is designed For AR-15 applications that run excessively hard such as suppressed, over-gassed carbines or “Thumpers” like the .50 Beowulf and .458 SOCOM.

Designed for hard cycling .223/5.56mm AR15 Carbines (.50 Beowulf and .458 SOCOM)
Drop-In Replacement
Reduce felt recoil
Improve reliability
Reduce bolt carrier speed
Reduce wear on parts
Reduce shock and vibration to optics
Suppress bolt bounce
Decrease sight movement
Smoother operation
Faster shot recovery time
Military-grade materials and manufacturing

View product

KynSHOT AR-15 Carbine Buffer – RB5000L

Out of stock

~~$149.99~~ Original price was: $149.99.$131.34Current price is: $131.34.

RB5000L KynSHOT Marksman Recoil Buffer is identical in form to RB5000 but designed to work in AR15 .223 / 5.56 platforms with lower power ammunition including 300 Blackout and other subsonic rounds.

Designed for 5.56mm/.223 cal. AR-15 with a collapsible stock (300 Blackout and other subsonic rounds)
Drop-In Replacement
Reduce felt recoil
Improve reliability
Reduce bolt carrier speed
Reduce wear on parts
Reduce shock and vibration to optics
Suppress bolt bounce
Decrease sight movement
Smoother operation
Faster shot recovery time
Military-grade materials and manufacturing

View product

KynSHOT AR-15 Carbine Buffer – RB5000

Out of stock

~~$149.99~~ Original price was: $149.99.$129.99Current price is: $129.99.

The RB5000 KynSHOT Marksman Recoil Buffer AR15 Carbine is a proven system that has seen heavy use with civilian competition shooters, law enforcement personnel, and the United States Armed Forces.

Can be used with a wide range of AR-15 calibers to include .450 Bushmaster, 7.62×39, 6.8 SPC, 6.5 Grendel, 7.62×40 Wilson, .204, .350 Legend, etc.
Drop-In Replacement
Reduce felt recoil
Improve reliability
Reduce bolt carrier speed
Reduce wear on parts
Reduce shock and vibration to optics
Suppress bolt bounce
Decrease sight movement
Smoother operation
Faster shot recovery time
Military-grade materials and manufacturing

View product

Fortis Manufacturing K2 Lightweight Enhanced End Plate and Castle Nut

Out of stock

$52.15 – $62.34

The K2 system utilizes a locking lever design that seats itself through a designed slot on the bottom of the endplate and into corresponding cutouts on the castle nut. This ultra-precision fit allows the castle nut to seat itself into place without the need to stake the endplate. No set screws, no backing out, and no failures. All of these features at only .53 oz / 15 grams!

Features:

Lightweight design at only .53 oz / 15 grams total
Castle nut and endplate are 7075 T6 Aircraft Grade Aluminum
Quick Detach Socket – 360º rotational locking interface
No set screws or ratcheting systems that can’t be reused
Made in the USA

Select options This product has multiple variants. The options may be chosen on the product page

-19%

US Rigger Mag Marker Bands

Out of stock

$14.23 – $20.33

U.S. Rigger Magazine Marker Bands are the ideal quick solution to quickly identifying the ammunition in the magazine. Bands are bright, solid colors and are Sharpie or paint pen writeable on the matte side for easy customization.

Keep your ammo organized and avoid catastrophic discharges.
Fits on extended handgun and rifle magazines. Also used to improve handgun grip.
Dimensions- 1 5/8″ Diameter x 1 1/4″ Wide x 1/16″ Thick.

Select options This product has multiple variants. The options may be chosen on the product page

-28%

US Rigger Retention Bands – Stars and Bars

Out of stock

$14.23 – $28.87

Stars and Bars Bands are designed to be multi-functional. Sized between US Riggers’ Stars and Stripes retention bands but having the capability of being a magazine marker for AR and larger caliber Sniper magazines.

Retain your gear.
Keep your ammo organized and avoid catastrophic discharges.
Heat Resistant
Weather Resistant
Durable and non-slip

Select options This product has multiple variants. The options may be chosen on the product page

-19%

US Rigger Retention Bands – Stars

Out of stock

$14.23 – $20.33

Designed to retain rifle and other tactical/hunting accessories securely without obstructing performance.

Dimensions – 1.5″Diameter x 0.5″Width x 1/16″ Thick
Silent
Heat Resistant
Weather Resistant
Durable and non-slip
100% Guarantee

Select options This product has multiple variants. The options may be chosen on the product page

-32%

US Rigger Retention Bands – Stars and Stripes

Out of stock

$14.23 – $50.82

Select options This product has multiple variants. The options may be chosen on the product page

US Rigger Retention Band – Striped Stars

Out of stock

~~$19.95~~ Original price was: $19.95.$17.28Current price is: $17.28.

Designed to retain rifle and other tactical/hunting accessories securely without obstructing performance.

Dimensions – 2.5″D x 0.75″W
Silent
Heat Resistant
Weather Resistant
Durable and non-slip
100% Guarantee

Select options This product has multiple variants. The options may be chosen on the product page

-6%

Forward Controls Design Trigger Guard – Winter

Out of stock

$23.41 – $23.75

TGF (Trigger Guard, Forward Controls) is designed for use with TDP spec forged lower receivers, and fills the gap forward of the pistol grip, between the trigger guard “ears”. The winter version has as much constant/unchanged space from the trigger bow forward as possible (instead of the space inside tapering and decreasing as the trigger guard nears the receiver’s front trigger guard holes).

Available in anodized black, desert tan, and OD green.
Lower receivers made from Cerro Forge “keyhole” forgings generally have taller trigger guard ears, as do Colt, LMT, and BCM lower receivers.
Please note ZEV produced lower receivers appear to have shorter trigger guard ears, and these shortened ears expose a bit of the bottom of the TGF, as shown below. This has no bearing on functionality. The latest Mega lowers (with the old Mega atomic whirl) has been reported to have long ears that do cover the TGF.
TGF is proudly designed and made in the USA. A trigger guard roll pin and set screw (for the front) are included. A 1/16 Allen wrench is required (not included).
TGF is machined from 7075 aluminum.

Select options This product has multiple variants. The options may be chosen on the product page