AR-15 / M4 / M16

Threaded for 1/2×28, precision machined from solid 4140 steel bar stock and black nitrided, it is probably the finest A2 style comp/flash suppressor ever produced.

• Material: 4140 steel bar.
• Finish: Black nitride.
• Provides 15 to 20% better muzzle rise compensation than the A2.
• A crush washer is included.
• Made in the USA.

The VLTOR EMOD provides a variety of enhancements in comparison to other stocks. The increased length is a major benefit for those weapons using scoped rifles, as it increases the available comb for any length of pull.

• Kit includes five position Mil-Spec receiver extension , carbine spring and buffer kit, VLTOR Lock Plate and VLTOR Lock Nut
• Waterproof side battery compartments that holds 4 CR123 or three AA batteries in each compartment
• Weatherproof compartment in the clubfoot area of the stock that hold two AA batteries
• Comes pre-assembled with rubber buttpad and strike plate
• Finish: Matte (anti-reflection/anti-glare)
• Impact and temperature resistant polymer, specifically blended for VLTOR stocks
• Has standard military and quick disconnect swivel socket accessible from both sides
• Slightly wider and longer at the toe than a regular M4 stock with a noticeable negative pitch making transitions from the ready position feel more natural

Crisp, clean, lightweight, safe, and unbelievably short reset. As the name suggests, it’s Literally The Best Trigger Ever Made.

• Platform: AR-15, AR-10, Honey Badger
• Type: 2 Stage
• Adjustable: No
• Weight: 1.9 oz

Designed to considerably improve the speed and efficiency of the AR15/M16 bolt catch, the B.A.D. Lever quickly addresses reloading and malfunction clearance shortcomings of AR15/M16 platforms by extending a paddle to the right side of the weapon, allowing manipulation of the bolt stop from the fire control/ready position with the right-hand trigger finger. Made from milspec-anodized aluminum, the B.A.D. Lever attaches to the standard AR15/M16 bolt release without permanent modification to the weapon. Functional for both left and right-handed shooters, the B.A.D. Lever also allows traditional bolt catch manipulation according to the AR15/M16 manual of arms. All mounting hardware included.

• Compatible with standard mil-spec forged AR15/M16 receivers*
• Thin, anti-snag profile and textured surface still allows for traditional manipulation of the bolt catch while maintaining unobstructed access to the trigger
• Attaches to the existing bolt catch paddle via one screw
• Machined from durable billet 6061-T6 aluminum
• Finished with MIL-A-8625F, Type III, Class 2 hard anodizing with manganese phosphate on the screw per MIL-DTL-16232G
• Torx® mounting screw with Nyloc® Blue patch prevents back out under recoil (Torx wrench included)
• Made in U.S.A.

BCM® Low Profile Gas Block for AR15, M16, M4, M4A1.

• Machined of steel, phosphate finish, for .625 barrels.
• Manufactured within very tight Mil-Spec tolerances on all ID’s.
• Barrel ID honed after finish per USGI TDP.
• Made by Bravo Company MFG, Inc. with set screw mounting.
• Set Screws are Steel 10-32 x 3/16 Knurled Cup Point

The Ten-Speed Triple M4 Mag Pouch holds three M4 magazines and is the perfect blend of speed and security. Ten-Speed® pouches use military grade elastic combined with ULTRAcomp™ laminate to create a multi-use pouch that weighs almost nothing and lays flat when not in use. The Triple M4 Mag Pouch holds three M4 magazines (polymer or metal), medical supplies, bandages, flashbangs, or other similar sized items.

• .125″ x 6″ x 6″
• 3 x 4 MOLLE field required
• Military-grade Ten-Speed® elastic front
• MOLLE compatible Helium Whisper® attachment system
• ULTRAcomp™ high-performance laminate

Criterion’s CORE Series barrels are designed with tactical shooters in mind helping you handle real-world applications by maintaining exceptional performance and rugged reliability during hard use.

• Weight: 2.3 lbs
• Dimensions: 24 x 3 x 3in
• Length: 13.9″
• Contour/Profile: CORE Series
• Gas Length: Mid-Length
• Gas Block: 0.625″
• Chamber: 223 Wylde
• Twist: 1-8
• Groove count: 6 Groove
• Material: 4150 CrMoV
• Finish: Chrome-lined, Phosphate
• Actual Weight: 1.60 lbs

With a straight forward, user friendly and highly intuitive design the single KYWI mag pouch is like no other. Utilizing a hybrid kydex and nylon design, you get all the rigidity you would expect from a kydex pouch and the lack of noise you want from a nylon pouch. These pouches feature a kydex wedge insert (KYWI) that provide the needed retention to secure your magazines without the need for bungee cord for rapid mag changes.

• This pouch is made for STANAG magazines: AR15/M4 style magazines
• It features 5x Elastic loops to fit five 12 gauge shotgun shells
• AK magazines will NOT fit in this pouch
• Kydex wedge insert (KYWI) provides retention
• Pouch is 4.25″ tall
• Requires mounting hardware

With A straight forward, user friendly and highly intuitive design the single KYWI mag pouch is like no other. Utilizing a hybrid kydex and nylon design, you get all the rigidity you would expect from a kydex pouch and the lack of noise you want from a nylon pouch. These pouches feature a kydex wedge insert (KYWI) that provide the needed retention to secure your magazines without the need for bungee cord for rapid mag changes.

• This pouch is made for STANAG magazines: AR15/M4 style magazines
• AK magazines will NOT fit in this pouch
• Hybrid kydex and nylon design
• Size: 5.25″ Tall x 9.25″ wide
• Requires mounting hardware

The best guard for big hands and gloved shooting. Especially in cold weather or tactical operations, you’ll need to upgrade for more room around the trigger. The B5 curved trigger guard is designed to accommodate gloved shooting, and even maintains the original swing-down feature for use with heavier winter gloves.

• Made of 6061 aluminum
• Milspec Type III anodized finish
• Drop-in upgrade
• Weight: 3.00 Ounces
• Width: 2.10 (in)
• Height: 0.53 (in)

The Arisaka Quick Detach (QD) Mount is a low profile design for M-Lok hand-guards. It features an anti-rotation interface and accepts all standard QD sling swivels, as well as the Geissele/ALG Defense forged QD sling swivel.

• Height: 0.375″
• Weight: 0.3 oz
• CNC machined from 6061-T6 aluminum
• MIL-A-8625 Type III hard coat anodized
• Requires a 5/32″ Allen wrench for installation (not included).
• Made in the USA.

• Low-profile length for increased mobility and decreased “snag” factor.
• The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
• Can be mounted in reverse angle to increase control when grabbing handguard and grip
• Flat sides give better yaw control to the shooter during firing and non-firing manipulations.
• Aggressive texture and storage volume combined with modular design to allow improvements and adaptation in the future.
• Cross bolt designed to work with improvised tools (such as a quarter) and allow for easy adjustment or re-tightening.
• Reversible clamps allow user to set up fasteners to reside on either side.
• Spring-loaded clamps makes installation and removal easier.
• Made in the U.S.A., and manufactured from high quality, impact resistant polymers.

*Test fit to ensure proper function (may display attributes consistent with this QC process)

The Arisaka Vertical Grip is a robust, minimal grip for M-Lok handguards. It features a radiused profile at the top which tapers to meet the mounting surface on the handguard, giving a low-profile feel and ergonomic comfort. Twin mounting screws ensure secure attachment. The grip is hollow, with no end-cap.

• Height: 2.50”
• Width: 1.30”
• Weight: 1.80oz
• CNC machined from 6061-T6 aluminum and MIL-A-8625 Type III hard coat anodized
• Requires a 3/32” Allen wrench for installation (not included)
• Made in the USA