AR-15 / M4 / M16

The Arisaka Ring Light Mount provides a flexible yet secure way to attach handheld lights to your handguard. Available for KeyMod, M-Lok, and CMR interfaces, it uses a vertically anchored ring system that comes in two sizes to accommodate a wide variety of lights.

The clamping ring will accept light bodies with a diameter from 1.00″ to 1.03.” A light can be installed and removed without having to take the mount off your handguard.

The offset placement of the light while using the mount is designed to allow clearance with most front sights. For example, a 1.03″ light like the Surefire G2 will work with the Magpul Gen 2 MBUS on a Noveske NSR, which is one of the thinnest handguards at 1.48″ wide.

• Weight: 1.0 oz.
• The mount is CNC machined from 6061-T6 aluminum
• MIL-A-8625 Type III hard coat anodized.
• Requires a 3/32″ Allen wrench for installation (not included).
• Made in the USA.

The Arisaka Low Profile Picatinny Rail is a 5 or 3 slot Picatinny rail for KeyMod handguard systems. It offers a reduced height to pull any Picatinny accessories closer to the handguard.

• Picatinny slots: 5 or 3
• Height over mounting surface: 0.277″
• Length: 2.15″ (5 slot), 1.37″ (3 slot)
• Weight: 0.6 oz (5 slot), 0.4 oz (3 slot)
• CNC machined from 6061-T6 aluminum and MIL-A-8625 Type III hard coat anodized.
• Requires a T15 Torx wrench for installation (not included).
• BCM KeyMod screws are covered under US Patent 9377274.
• Made in the USA.

The Patent Pending Arisaka Offset Scout Mount is designed specifically for the Surefire Scout Light M600 and M300 series weapon lights, the Modlite PLH and OKW weapon lights, the Arisaka 300 and 600 Series Lights, the Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser), and Olight Odin. It replaces the stock Picatinny rail adapter with a low profile mount for M-Lok handguards. The Offset Scout Mount is very low profile at less than 0.20″ thick.

• Weight: 0.4 oz
• Length: 1.265”
• CNC machined from 6061-T6 aluminum
• MIL-A-8625 Type III hard coat anodized.
• Requires an IP25/T25 and IP20/T20 Torx driver for installation (not included)
• M620 series lights can also be used with the Offset Scout Mount with the addition of the Arisaka Offset M620 Adapter.
• Includes necessary screws to attach light body to mount.
• Made in the USA.

The Patented Arisaka Inline Scout Mount is designed specifically for the Surefire Scout Light M600 and M300 series weapon lights, the Arisaka 300 and 600 Series Lights, and the Streamlight Protac Rail Mount 1 and 2. It replaces the stock Picatinny rail adapter with a low profile mount for KeyMod handguards.

• Length: 3.0”.
• Height: 0.20″ (at Surefire Scout Light mounting point).
• Weight: 0.5 oz.
• Material: CNC machined from 7075-T6 aluminum.
• Finish: MIL-A-8625 Type III hard coat anodized.
• BCM KeyMod screws are covered under US Patent 9377274.
• Includes necessary screws to attach light body to mount.
• Made in the USA.

The Stealth Recoil Spring™ SRS™ is a self-contained multi-stage drop-in replacement for your standard buffer and spring. The SRS™ is designed to keep the buffer spring from rubbing against the inner wall of the buffer tube providing smooth, quiet operation and the second stage helps reduce the felt recoil significantly.

• Drop-in replacement for standard buffer and spring
• Reduce felt recoil
• Keep the buffer spring from rubbing against the inner wall of the buffer tube
• Buffer mass is designed to stay under constant tension against the bolt carrier
• Rubber O-ring on the head of the buffer mass prevents metal on metal contact
• Made in the U.S.A.

Armaspec Stainless Steel Lower Parts Kit LPK less Trigger Group & Grip for .223/5.56. If you are looking for a high end lower parts kit, than this one is for you. It incorporates all the great products from Armaspec in one package.

• Includes Armaspec Enhanced Lower Parts
• Compatible with most AR-15 lowers
• Made in the U.S.A.
• Lifetime warranty

The MOE-K2+ Grip combines reinforced polymer body construction with comfortable, wrap-around rubber overmolding for maximum weapon control in adverse environments. Similar in concept to the smaller MOE-K, the MOE-K2 is a drop in upgrade for AR15/M4’s that offers a more vertical grip angle, but in a full-size grip design. The steeper vertical grip angle is optimized for use on PDW (Personal Defense Weapon) configurations and improves comfort and control on short LOP rifles that bring the primary hand in closer to the shooter’s body. With the rubber overmolding for positive weapon control, compatibility with optional Storage Cores for gear stowage, and a unique backstrap design for proper trigger finger placement, the K2+ brings modern styling, ergonomics, and comfort to the AR platform. All mounting hardware and a basic grip cap included. Made in U.S.A.

• Replacement for AR15/M4 pistol-grip*
• One-piece reinforced polymer construction with wrap-around rubber overmolding
• More vertical grip angle than standard A2 grips
• Unique backstrap design for proper trigger finger placement
• Hard-polymer bottom edge to reduce equipment snags or grip damage
• Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage

Similar in concept to the MOE-K, the MOE-K2 is a drop in upgrade for AR15/M4’s that offers a more vertical grip angle, but in a full-size grip design. The steeper vertical grip angle is optimized for use on PDW (Personal Defense Weapon) configurations and improves comfort and control on short LOP rifles that bring the primary hand in closer to the shooter’s body. With an aggressive TSP texture for positive weapon control, compatibility with optional Storage Cores for gear stowage, and a unique backstrap design for proper trigger finger placement, the K2 brings modern styling and ergonomics to the AR platform. All mounting hardware and a basic grip cap included.

• Replacement for AR15/M4 pistol-grip*
• One-piece reinforced polymer construction
• More vertical grip angle than standard A2 grips
• Unique backstrap design for proper trigger finger placement
• Aggressive TSP texture (Trapezoidal Surface Projections) for positive weapon control in all environments
• Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage
• Made in U.S.A.

Upon introduction of the M16 in the 1960s the manual of arms for shooting positions included a bladed stance with an extended elbow on the fire control side. Because of numerous changes in the dynamics of the current fighting techniques we now virtually square off with the bad guy when engaging the target. The Gun Fighter’s Grip by BCM allows for a reduced angle and improved ergonomics when shooting in the modern gun fighting stances.

• Reduced angle for improved ergonomics
• Hinged trap door offering storage inside the grip with a water-resistant rubber gasket
• Each grip includes both an extended modular insert to close the gap between the trigger guard and pistol grip, and a smooth modular insert for use with some rifles with larger built-in trigger guards. (user can decide which one to install)
• Made in the USA and manufactured from high-quality impact resistant polymers.
• Test fit to ensure proper function (may display attributes consistent with this QC process)

The storage-capable version of the flagship Magpul MOE SL™ carbine stock, the MOE SL-S (Storage) Carbine Stock – Mil-Spec is a direct replacement buttstock for AR15/M4 carbines. The sleek profile, dual-side release latches, and waterproof battery tubes make it the slimmest storage tube stock available.

• Waterproof storage
• Enhanced cheek weld
• Rubber butt-pad
• Long-lasting adjustability
• Rollover toe to fit gear
• Made in the USA

The MOE SL Stock – Mil-Spec Model (MOE Slim Line) is a drop-in replacement buttstock for AR15/M4 carbines using Mil-Spec sized receiver extension tubes. Designed for the modern battlefield, the sleek profile, dual-side release latches, rolled toe, and angled rubber butt-pad are optimized for use with body armor or modular gear and provides for efficient shoulder transitions.

• Platform: AR-15, M4, M16, AR-10, LR-308, SR-25
• Compatibility: Mil-Spec extension tube (not included)
• Material: Polymer
• LOP, M4 Collapsed ~10.8 in.
• LOP, M4 Extended ~14.1 in.
• LOP Adjustment Range 3.3 in.
• Length, max 7.2 in.
• Weight 9.6 oz.

The Magpul CTR (Compact/Type Restricted) – Mil-Spec Model is a drop-in replacement buttstock for AR15/M16 carbines using mil-spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation. The CTR also features a supplemental friction lock system that minimizes excessive stock movement for enhanced weapon stability* and an ambidextrous QD sling mount that will accept any push-button sling swivel. The Mil-Spec Model includes a standard 0.30″ thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.

• Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, Armalite, S&W, LMT, and others (please see the note below)
• Supplemental friction lock minimizes accuracy robbing wobble*
• Sloping cheek weld combines a slim profile with user comfort
• Shielded release latch prevents snagging and accidental operation
• Premium chrome-silicon lock spring provides positive locking and long service life
• Side mounting slots accept optional cheek risers for NON AR15/M4 applications
• Removable 0.30″ Rubber Butt-Pad offers an anti-slip surface and increases impact protection

The CQG grip has been specifically designed to enhance ergonomics and performance of compact sized short-barreled rifles, AR15 pistols, pistol caliber carbines, and PDWs. Compatible with the AR15/M16, AR10/SR25™, SIG MPX/MCX™, and FN SCAR ® platforms. It supports a wide range of hand sizes and weapon configurations, featuring a more pronounced vertical grip angle, anti-slip front and rear texture, and an enhanced beaver tail design; the CQG encourages the shooter’s hand to be positioned higher on the grip, for greater control and improved comfort.

• Impact-Modified Reinforced Nylon
• Fits AR15/AR10/SR25/MCX/FN SCAR 16 and 17 Pattern Hosts
• 77 grams
• NSN: 1015-01-674-6753
• MADE IN USA