The Arisaka Aimpoint Micro Mount is designed for the Aimpoint Micro T1 and T2 optics, and will also function with other red dots using the same footprint.

• Material: CNC machined from 7075-T6 aluminum.
• Finish: Type III hard-coat anodizing.
• Weight (including screws): 3.1 oz
• Picatinny clamp – 50 inch-lbs (5.7 Nm)
• Made in the USA

The Patent Pending Arisaka Offset Optic Mount is a modular mounting solution that allows the user to select a 35 or 45 degree offset position for a red dot sight without requiring additional components. The 35-degree position brings the red dot sight up closer to slimmer, smaller scopes, while the 45-degree position provides additional clearance around wider turrets or larger, higher magnification scopes.

• Designed to be attached to the top Picatinny rail of an AR15 rifle.
• When the rifle is canted to make use of the offset red dot sight, the optic remains centered over the bore and maintains a lower 1/3 co-witness height.
• The base and optic plates can be reversed, allowing for use on the left or right side.

The Patent Pending Arisaka Offset Scout Mount is designed specifically for the Surefire Scout Light M600 and M300 series weapon lights, the Modlite PLH and OKW weapon lights, the Arisaka 300 and 600 Series Lights, the Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser), and Olight Odin. It replaces the stock Picatinny rail adapter with a low profile mount for M-Lok handguards. The Offset Scout Mount is very low profile at less than 0.20″ thick.

• Weight: 0.4 oz
• Length: 1.265”
• CNC machined from 6061-T6 aluminum
• MIL-A-8625 Type III hard coat anodized.
• Requires an IP25/T25 and IP20/T20 Torx driver for installation (not included)
• M620 series lights can also be used with the Offset Scout Mount with the addition of the Arisaka Offset M620 Adapter.
• Includes necessary screws to attach light body to mount.
• Made in the USA.

The Arisaka Offset Scout Mount is designed to replace the stock Picatinny rail adapter with a low-profile mount for the SIG MCX Virtus M-LOK handguards.

• Length: 1.265″
• Weight: 0.6 oz
• Machined from 6061-T6 aluminum
• MIL-A-8625 Type III hard coat anodized
• Includes necessary screws to attach light body to mount

The Patent Pending Arisaka Inline Scout Pro Mount is designed specifically for the Surefire Scout Light Pro swivel bodies. This mount is a drop-in replacement for the OEM M-Lok mount, and allows for optimal positioning with lasers, plus can be used in a cantilever fashion off the end of the handguard for less barrel or suppressor shadow.

• Length: 3.0″
• Weight: 0.8 oz
• Material: 7075-T6 aluminum
• Finish: Type III Hard Coat Anodized
• Platform: M-LOK
• Made in the USA

The Patented Arisaka Inline Scout Mount is designed specifically for the Surefire Scout Light M600 and M300 series weapon lights, the Arisaka 300 and 600 Series Lights, and the Streamlight Protac Rail Mount 1, 2, and HL-X. It replaces the stock Picatinny rail adapter with a low-profile mount for M-Lok handguards. The mount is especially useful on handguards that feature 45-degree angle mounting flats, such as the BCM MCMR, Geissele Automatics SMR MK4 and MK8, Daniel Defense MFR, KAC URX4, ALG Defense EMR, MI Gen 3, Mega MML, and Mega/Hodge Wedge Lock.

• Length: 3.0”
• Height: 0.20″ (at Surefire Scout Light mounting point)
• Weight: 0.6 oz
• Material: 7075-T6 aluminum
• Finish: Type III Hard Coat Anodized Black, FDE, and Tan
• Made in the USA

The Cloud Defensive “Torrent series”. Manufactured by Impact Weapons Components in conjunction with Haley Strategic Partners. Strong and versatile light mounts.

• For use with Cloud Defensive REIN, Modlite PLHv2 and OKW, Surefire M300, M600 Scout (except M600 AA), Streamlight Protac Rail Mount 1, 2, and all replacement M300 and M600 bodies, including backbone and M-LOK® compliant rails.
• 6 light mounting positions provide .626” of lateral adjustment to clear all laser aiming devices
• Positions the light as close to the firearm bore or APITAL as possible
• Light offset optimized at a 45 degree offset for ergonomic activation
• Ambidextrous with 6 total mounting solutions on 3 sided M-LOK® rail system
• Low profile, lightweight and does not impede weapons manipulation
• Mount does not interfere with the operation of front back-up iron sights

The Cloud Defensive “Torrent series”. Manufactured by Impact Weapons Components in conjunction with Haley Strategic Partners. Strong and versatile light mounts.

• For use with Cloud Defensive REIN, Modlite PLHv2 and OKW, Surefire M300, M600 Scout (except M600 AA), Streamlight Protac Rail Mount 1, 2, and all replacement M300 and M600 bodies, including backbone and 1913 Picatinny rails.
• 3 light mounting positions provide .250” of lateral adjustment
• Cantilevered mounting design shifts light forward of mount, increasing usable rail space.
• Light offset optimized at a 45 degree offset for ergonomic activation
• Ambidextrous with 8 total mounting solutions on 4 sided 1913 picatinny rail system
• Low profile, lightweight and does not impede weapons manipulation
• Positions the light as close to the firearm as possible
• Mount does not interfere with the operation of front back-up iron sights

The Stealth Recoil Spring™ SRS™ is a self-contained multi-stage drop-in replacement for your standard buffer and spring. The SRS™ is designed to keep the buffer spring from rubbing against the inner wall of the buffer tube providing smooth, quiet operation and the second stage helps reduce the felt recoil significantly.

• Drop-in replacement for standard buffer and spring
• Reduce felt recoil
• Keep the buffer spring from rubbing against the inner wall of the buffer tube
• Buffer mass is designed to stay under constant tension against the bolt carrier
• Rubber O-ring on the head of the buffer mass prevents metal on metal contact
• Made in the U.S.A.

Armaspec Stainless Steel Lower Parts Kit LPK less Trigger Group & Grip for .223/5.56. If you are looking for a high end lower parts kit, than this one is for you. It incorporates all the great products from Armaspec in one package.

• Includes Armaspec Enhanced Lower Parts
• Compatible with most AR-15 lowers
• Made in the U.S.A.
• Lifetime warranty

Building on the proven MBUS Pro platform, the MBUS Pro Offset Sights are part of an an effective aiming system to supplement magnified optics on M1913 Picatinny mounting surfaces. In the event of a damaged or nonfunctional primary optic, or a close target, rotating the rifle 45 degrees provides the shooter with a fully-featured iron sighting solution.

• All steel construction
• Steel, rectangular sight post selectable between Match and Standard widths
• —.040” Match width for increased precision
• —.060” Standard width for maximum visibility
• Case hardened and finished with Melonite QPQ™ for extreme resistance to wear and corrosion
• Mounts on any MIL-STD-1913 Picatinny/STANAG 4694 rail including receiver-height gas blocks
• Elevation adjustment knob – no tools required
• Positive detents in both the up and down positions as well as on the elevation knob
• Standard AR height over bore when deployed, 45 deg. offset right-hand side
• *NOTE: All MBUS Pro Front Sights now come factory-equipped with the Enhanced Front Sight Post. There is no need to order one separately unless you are retrofitting an older MBUS Pro front sight. Enhanced Front Site Posts are not compatible with standard MBUS polymer sights.

Built on the proven MBUS Pro platform, the MBUS Pro Offset Sights are part of an an effective aiming system to supplement magnified optics on M1913 Picatinny mounting surfaces. In the event of a damaged or nonfunctional primary optic, or a close target, rotating the rifle 45 degrees provides the shooter with a fully-featured iron sighting solution.

• All steel construction
• Case hardened and finished with Melonite QPQ™ for extreme resistance to wear and corrosion
• Mounts on any MIL-STD-1913 Picatinny/STANAG 4694 rail
• Windage adjustable with low-profile knob – no tools required
• Positive detents in both the up and down positions
• Standard AR height over bore when deployed, 45 deg. offset right-hand side
• *NOTE: Only compatible with MBUS Pro OFFSET Front sight MAG525.

The MOE AK+ Grip combines reinforced polymer body construction with comfortable, wrap-around rubber overmolding for maximum weapon control in adverse environments.

• Rubber overmold on reinforced polymer construction
• Hard polymer bottom edge prevents snags and grip damage
• Grip counts as one US compliance part for 922(r).
• Storage core capability accepts optional cores
• Includes a basic grip cap, but accepts optional storage cores for customized gear stowage
• Designed to improve ergonomics and weapon control
• Drop-in upgrade for AKM/AK-47/AK-74/AK-101/AK-103 pistol grips*
• Fits both milled and stamped receivers, including those with grip reinforcement plates

A drop-in upgrade for AK-pattern pistol grips, the MOE AK Grip is designed to improve ergonomics and comes with an aggressive TSP texture for positive weapon control.

• Fits both milled and stamped receivers
• One-piece reinforced polymer construction
• Storage core capability accepts optional cores
• Aggressive tsp texture