Impact Weapons Components
Impact Weapons Components M-LOK QD Sling Mount
Out of stock
$18.95The angular skeletonized design of the IWC QD Sling Mount provides a rugged, low-profile snag-proof mount to attach your QD sling to any M-LOK® slot.
- Rotation Limited to 8 positions to prevent QD sling swivel rotation and sling wrap-up and twist
- No more lost screws with IWC’s exclusive Captured Fastener Design, which retains the fastener in the mount
- Accepts all push-button quick detach sling swivels
- Ultra-lightweight design weighs only .314 ounces
- Quality is ensured by precision CNC machining to exacting tolerances from USA Made 6061-T6 aluminum; then hard anodized Type III black matte finish per MIL-A-8625F.
Impact Weapons Components Micro Flush QD Sling Mount
Out of stock
$17.82The IWC QD Micro can be mounted through a single ½” diameter hole in most polymer stocks, handguards, forends, and buttstocks measuring up to .230” in thickness, including all M.O.E. Handguards by Magpul Industries.
- Accepts any push-button Quick Detach sling swivel.
- 8 position rotation limited to prevent sling wrap-up.
- 95% lower profile than a separate Sling Mount and Picatinny MIL-Spec 1913 Rail Section, the ergonomic, flush-mount design eliminates all sharp edges that can ensnarl the operator’s gear.
- The QD Micro Flush QD Sling Mount is designed to fit precisely through any vent hole in the Troy Industries TRX Extreme and Alpha BattleRails with no modifications.
- Weighing just .243 ounces, the ultra-lightweight design CNC machined from BILLET 303 Stainless Steel eliminates all unnecessary material and fasteners. IWC then finishes the mount in Black Oxide to prevent rust & corrosion.
- 100% LIFETIME WARRANTY. PERIOD.
- IWC’s MOUNT-N-SLOT products are MADE BY AMERICANS.
Impact Weapons Components 2 To 1 Point Triglide
Out of stock
$19.95The 2 To 1 Point Triglide allows you to rapidly convert your new or existing Two Point Sling into a One Point Sling, on the run, when extra maneuverability is required and then back to a Two Point for extra stability or when carrying the weapon. The 2 To 1 Point Triglide allows you to leverage the best of both sling types.
- 2 to 1 Point Triglide – Threads Into Your Sling & Makes it Convertible!
- The ONLY transitional sling device designed to function with any Push Button Quick Detach Sling Swivel.
- United States Patent# D685,445
Impact Weapons Components SCAR Charger Charging Handle
Out of stock
$34.95The location and design of the FNH Factory SCAR reciprocating Charging Handle can sometimes be a major problem–especially if you are mounting optics with a QD lever system. Your knuckles will take a beating for sure. IWC’s “SCAR Charger” Charging Handle is uniquely designed to lower the contact point for the Operators hand, providing clearance for your knuckles to pass freely under the Optic Mount, avoiding injury.
- Control of the SCAR Charger is improved over the factory FNH Charging Handle. CNC machined and relieved center section of increases the amount of edged contact surfaces on the SCAR Charger, improving grip, with or without gloves.
- IWC’s SCAR Charger is virtually the same weight & length as the factory FNH Charging Handle, ensuring the weapon functions and cycles as designed.
- The outboard, pointed end of IWC’s SCAR Charger can now be used as gouging / tearing weapon, similar to the function of the charging handle found on AK type weapons.
- Designed to function flawleessly on ALL SCAR models: MK16, MK17, MK16S and MK17S
Impact Weapons Components QD End Plate for AR-15/M4
Out of stock
$18.95The QD End Plate by Impact Weapons Components is a rotation limited QS Sling Swivel Socket for the AR15/M4 platform. Features a durable black melonite plating which assures a perfect, deep rich black color to match your receiver and other IWC components.
- Rotation Limited to prevent QD Sling Swivel rotation & sling wrap-up.
- Precision CNC Machined from a single piece of Billet Steel. NO ROUGH, Laser-cut Edges that look like a beaver chewed them out to snag your gear!
- Single-piece construction guarantees no parts to work loose or gaps to rust & corrode.
- Steel Construction allows for proper staking to MIL-Spec
- Proudly Made In USA by Americans at Impact Weapons Components, LLC.
Impact Weapons Components Multi Light Benelli M4 Mount for Scout
Out of stock
$70.00Simplistic, Reliable, Ultra-Lightweight design contains only the materials needed to meet the objective; attaching a light to the Benelli M4 Weapon System.
- Weighs 1.27 Ounces.
- Only one tool needed for installation.
- CNC Machined from Billet 6061-T6 Aluminum and Black Type III Mil-Spec Anodized finish.
- Made in USA
Impact Weapons Components Reversible Hand Stop – 1913 Picatinny
Out of stock
$29.95IWC designed the WEAPON CONTROL MOUNT-N-SLOT 1913 Hand Stop to attach directly to any MIL-SPEC 1913 Picatinny Rail.
- Ergonomic, compact design eliminates all sharp edges
- weighs only .56 ounces
- Occupies a single recoil slot
- CNC Machined from 6061-T6 aluminum; Hard anodized Type III matte finish per MIL-A-8625F
- MADE IN USA
Impact Weapons Components M-LOK Barrier Hand Stop
Out of stock
$27.00IWC’s reversible Barrier Hand Stop is designed with an integrated Quad-Point Grip profile on one half and an ergonomic resistance point on the other half
- Provides force point to drive the firearm against an object like a door frame.
- Allows for extra grip when wearing gloves.
- The Smooth face provides comfortable, ergonomic, and low profile leverage.
- Material: 6061-T6 Aluminum.
- Finish: Hard anodize Type III black matte finish.
- Dimensions: Height: 1.113″ Width: .600″ Length: 1.350″
- Manufacturer lifetime warranty.
- Made by Americans in the USA.
Impact Weapons Components Low Profile M-LOK Hand Stop
Out of stock
$27.00As opposed to a bulky Vertical Fore Grip, IWC designed the reversible Smooth face of the Hand Stop to provide a comfortable, ergonomic and low profile leverage point for your hand to push or pull against or for placement between your fingers as you grip the firearm
The Hand Stop is in it’s element when placed at the front of a Pistol, as the Smooth face is ideal to press your hand against for increased leverage, stability and control
- No more lost screws with IWC’s exclusive Captured Fastener Design, which retains the fastener in the mount, and reduces the size of the access hole needed for the fastener to one just big enough for the hex key to pass into, reducing the likelihood of the Hand Stop becoming clogged with dirt and debris
- The Hand Stop directly attaches to any Magpul M-LOK® compliant slot
- Weight: Ultra-lightweight design weighs only .507 ounces
- Dimensions: Height: 1.113″ Width: .600″ Length: 1.350″
- Precision CNC machining to exacting tolerances from USA Made 6061-T6 aluminum; then hard anodized Type III black matte finish per MIL-A-8625F
- 100% LIFETIME WARRANTY. PERIOD
- IWC MOUNT-N-SLOT products are MADE BY AMERICANS IN USA
Impact Weapons Components 45 Offset 1913 Rail QD Rotation Limited Sling ‘Mount-N-Slot’
Out of stock
$29.95The LOWEST PROFILE Sling Mount available! IWC’s 45 Degree Offset design recesses the Quick Detach Socket as close to the centerline of the weapon as possible for maximum clearance.
- Unique 45 Degree Offset design places the Push Button Quick Detach Sling Swivel as close to the centerline of the weapon, providing maximum clearance which greatly reduces any chance to ensnarl the operators gear.
- Rotation is limited to allow proper positioning of the sling between the firing and carrying position. Prevents sling wrap-up and twist.
- Accepts all Heavy Duty or Standard Push Button Quick Detach Sling Swivels that connects to any sling and sling system.
Impact Weapons Components QD Rotation Limited ‘Mount-N-Slot’ Sling Mount for Buttstock
Out of stock
$29.95QD Rotation Limited Sling Mount directly attaches to the webbing slot on a variety of Buttstocks and accepts all Push Button QD Sling Swivels. IWC’s QD Rotation Limited MOUNT-N-SLOT for Buttstocks provides a simple, lightweight and cost-effective solution for these firearms.
- Directly attaches through the slot intended for webbing located in many Buttstocks
- Rotation is limited to allow proper positioning of the sling between the firing and carrying position, preventing sling wrap-up and twist
- Accepts any Heavy Duty or Standard push button Quick Detach Sling Swivel that connects to any sling and sling system
- Ergonomic, DIRECT attach design eliminates all sharp edges which can ensnarl the operator’s gear
- Ultra-light MOUNT-N-SLOT™ design weighs only .490 ounces
- CNC Machined from BILLET 6061-T6 aluminum; Type III Anodized per MIL-A-8625F
- NO GUNSMITHING REQUIRED
- MADE BY AMERICANS working at Impact Weapons Components.
Impact Weapons Components KeyMod QD Rotation Limited Sling Mount
Out of stock
$17.00- Accepts any Heavy Duty or Standard push button Quick Detach Sling Swivel that connects to any sling and sling system
- Rotation is limited to 8 positions which allows proper positioning of the sling between the firing and carrying position. Prevents sling wrap-up and twist
- Sculpted design to compliment the shape of KeyMod rails, the mount provides a low profile, snag-proof and ergonomic design
- Directly attaches to any KeyMod compliant slot
- Weight: Ultra-lightweight MOUNT-N-SLOT design weighs only .172 ounces
- Dimensions: .188″ High .550″ Width 1.308″ Length
- 100% LIFETIME WARRANTY. PERIOD
- IWC MOUNT-N-SLOT products are MADE BY AMERICANS IN USA