Unity Tactical

-2%
Add to compare

Unity Tactical Platform Adapter

Out of stock

$22.20 – $28.29

The Unity Tactical Platform Adapter was developed in response to Special Operations Forces wanting to attach the USSOCOM-contracted AMP™ Tactical Headset from Ops-Core® to non-ARC™ Railed helmet platforms. The Platform Adapter will convert the AMP™ Helmet Arm to interface with Team Wendy® EXFIL™ (1-3.0) Rails as well as M-LOK rails used by manufacturers such as MTEK® and Hard Head Veterans®.

  • Weight: EXFIL: 4g, MLOK: 2g
  • Compatible with: EXFIL Rail (Team Wendy), MLOK Rail (MTEK, HHV)
  • Material: Reinforced Polymer
  • Breakaway: 8 ft lbs.
  • Country of Origin: U.S.A.
Select options This product has multiple variants. The options may be chosen on the product page
-42%
Add to compare

Unity Tactical SARA Sordin Adapters

Out of stock

$39.98 – $60.00

Sordin Arc Rail Adapters (SARA) were derived out of a need to directly attach MSA Sordin’s directly to an end user’s helmet. Rather than reinventing the wheel, the SARA calls on the spring tension generated by the Unity MARK rail adapters to achieve proper seal around the user’s ears and seamlessly integrate into the user’s head borne system. Lightweight, streamlined, and designed with the simplicity and strength demanded by the end-user, the SARA eliminates the headaches and discomfort associated with wearing headband style ear pro inside the helmet. Includes ESS studs for compatibility with both Over The Head (OTH) and Behind The Head (BTH) systems. Kit Includes:

  • (4) Unity SARA adapters
  • (4) Mounting Set Screws
  • (2) ESS Mounting Studs
  • Installation Instructions
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Unity Tactical SPARK Marker Light

Out of stock

$20.94 – $27.95
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Unity Tactical FUSION Offset Rail – Short

Out of stock

$22.20

The Offset Rail gives the user the ability to mount Picatinny/1913 accessories to the FUSION Hub. It has a slightly offset mounting surface to give the user 2 positions (high or low).

  • INTERFACE: 1913/Picatinny – Surefire X-Series, Streamlight TLR-Series, Inforce WML, Offset Optics, Pressure Switch, + More
  • FUSION™ is a modular, multi-purpose mount designed to give the end-user extreme flexibility in mounting options. It was engineered from the ground up to provide a strong mounting base with the widest range of configurations while remaining lightweight and low profile.
  • Material: 6061-T6 Aluminum
  • Finish: Type 3 Hardcoat Anodized
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Unity Tactical M-LOK Fusion Adapter

Out of stock

$25.00

FUSION M-LOK Adapter allows a direct mount option for SureFire Scout style weaponlights, including Modlite, Streamlight, and Arisaka Defense. Clamping directly through the rail, this mounting option is one of the tightest fitting and closest-to-the-rail options available on the market.

  • Material: 6061-T6 Aluminum
  • Finish: Type 3 Hardcoat Anodized
View product
Add to compare

Unity Tactical CLUTCH Belt Insert Kit

Out of stock

$49.94
View product
-65%
Add to compare

Unity Tactical CLUTCH Belt

Out of stock

$69.98 – $181.00
Select options This product has multiple variants. The options may be chosen on the product page
-19%
Add to compare

Unity Tactical FAST Flip-to-Center Mag Mount for EOTech G33

Out of stock

Original price was: $239.00.Current price is: $194.15.

FAST™ is a series of optic mounts and platforms by Unity Tactical that provide end users with a quicker sight picture than standard height mounts.

  • Features a 2.26” optical centerline height.
  • Faster/easier reticle acquisition while wearing electronic earpro/communications headsets, night vision goggles, and gas masks.
  • Features the first-ever Flip to Center (FTC) mechanism.
  • Designed for the L-3 EOTech® G33 Magnifier.
  • This mount hangs the magnifier upside down so as to not impinge the adjustment knobs on the host weapon’s receiver.
  • FAST™ FTC Magnifier Mounts come complete with American Defense Manufacturing® patented QD Auto-Lock™ Lever.
  • The FAST™ FTC Magnifier Mount is built from 7075-T6 Aluminum and Type III Hardcoat Anodized.
  • Heads-up posture helps users maintain a neutral spine position which is more comfortable while wearing helmets, plate carriers, and other heavy gear.
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Unity Tactical Remora Mount for 3M Peltor™

Out of stock

$29.00

The Unity Tactical Remora™ for 3M Peltor™ Rail Adapters provides an accessory mounting platform directly overhead of the rail mount hub. It makes the most use of the very limited rail-estate on a helmet with rail-mounted comms that utilize the OEM rail mount assembly.

Based on the original Remora™ for our successful MARK platform, Remora™ for 3M Peltor™ quickly and easily installs to the headset mounting hub using included hardware. The mount platform provides unprecedented versatility. Users are no longer relegated to precariously attaching lights and other accessories with Velcro.

Select options This product has multiple variants. The options may be chosen on the product page
-16%
Add to compare

Unity Tactical TAPS SYNC – Dual Pressure Switch

Out of stock

$152.07 – $167.40

TAPS (Tactical Augmented Pressure Switch) from TNVC and Unity Tactical is a complete one point command and control system for all weapon-mounted electronics. It provides low profile, dual-device control for lights and lasers. TAPS mounts directly to any industry standard rail, including M1913 Picatinny, KEYMOD, and M-LOK. No third party rail adapters are needed, keeping the weapon lighter and sleeker. It features two on-board buttons and two accessory leads.

Available in 4 button configurations, TAPS SYNC utilizes a patented double pole dome switch to fire both devices simultaneously on isolated circuits to protect your devices.

Select options This product has multiple variants. The options may be chosen on the product page
-67%
Add to compare

Unity Tactical Hot Button – Rail Mount

In stock

$99.99 – $149.98

Hot Button is a revolutionary control device for weapon-mounted electronic accessories. Developed out of a need to conserve rail-estate, improve actuation ergonomics, and mechanically integrate with weapon fore-ends, Hot Button has successfully reinvented how you interface with your lights and lasers.

  • 45-degree angled button for an exponentially more comfortable press.
  • Raised, crenelated bezel protects the button from accidental actuation.
  • Overall footprint is much smaller than factory OEM pressure pads.
  • Available for standard Surefire tail caps and standard Crane-Style laser ports.
  • Hot Buttons come standard with 7″ cables.
Select options This product has multiple variants. The options may be chosen on the product page
-67%
Add to compare

Unity Tactical Hot Button – M-LOK

In stock

$99.99 – $113.05
Select options This product has multiple variants. The options may be chosen on the product page
-7%
Add to compare

Unity Tactical FAST Micro Mount

Out of stock

Original price was: $205.00.Current price is: $191.67.
Select options This product has multiple variants. The options may be chosen on the product page
-10%
Add to compare

Unity Tactical FAST Flip-to-Center Mag Mount for Aimpoint

Out of stock

$242.00 – $245.67
Select options This product has multiple variants. The options may be chosen on the product page
-1%
Add to compare

Unity Tactical FAST Optics Riser – for Lower 1/3 Optics

Out of stock

Original price was: $105.00.Current price is: $104.04.

FAST™ is a series of optic mounts and platforms that provide end users with a quicker sight picture than standard height mounts. A 2.26” optical centerline height provides faster/easier reticle acquisition while wearing electronic earpro/communications headsets, night vision goggles and gas masks and allows for more rapid visual processing of the battlefield by promoting a heads-up posture. A heads-up posture also helps users maintain a neutral spine position which is more comfortable while wearing helmets, plate carriers, and other heavy gear.

  • Securely elevates block-type red dot optics with a standard lower 1/3 cowitness picatinny mount to a 2.26″ optical center line
  • For direct attachment of optics such as EOTech EXPS, Leupold LCO, Vortex UH-1, and other “lower 1/3” optics
  • Comes standard with a rail-grabber clamp. A Flip-Up Offset Backup Rear Iron Sight module can be purchased separately
  • Built from 7075-T6 Aluminum and Type III Hardcoat Anodized Black or FDE
  • FAST™ FTC Aimpoint OMNI Mag Mount sold separately
Select options This product has multiple variants. The options may be chosen on the product page
-63%
Add to compare

Unity Tactical TAPS Dual Pressure Switch – Standard Model

Out of stock

$59.98 – $148.44

TAPS (Tactical Augmented Pressure Switch) from TNVC and Unity Tactical is a complete one point command and control system for all weapon-mounted electronics.

  • Provides low profile, dual-device control for lights and lasers.
  • TAPS allows placement of weapon accessories in optimal location while providing a single point of actuation of the operator’s choosing.
  • Rather than needing to place both light and laser where they can be activated directly, or needing to find places for multiple remote pressure pads while securing loose cables, TAPS literally places control at the operator’s fingertips in a single, user-friendly package.

2019 Updated Model! The TAPS Standard now features Unity Tactical built wire cables and wire leads.

Select options This product has multiple variants. The options may be chosen on the product page
-9%
Add to compare

Unity Tactical Cold Weather Liner (CWL)

Out of stock

$108.00 – $126.00

The Unity Cold Weather Liner (CWL) is designed to install in any helmet with Velcro pads. By integrating directly into the helmet, the CWL creates a barrier against the elements with micro fiber fleece that keeps the wearer’s head warm. The material thickness creates minimal or no displacement of pads that can cause the helmet to not ride properly, as is the case while wearing a standard beanie under the shell. This ensures correct shell coverage of the head, alignment of night vision goggles, and fitting of communications gear. Operator comfort is increased exponentially by providing more coverage to exposed areas under the helmet shell with dual layer fleece while the same pads that normally contact the head will continue to do so with the CWL installed.

Select options This product has multiple variants. The options may be chosen on the product page
-15%
Add to compare

Unity Tactical MARK Helmet Accessory Kit

Out of stock

$64.88 – $120.12

The Modular Attached Rail Kit (MARK) allows the end user to seamlessly integrate their hearing protection and/or integrated communications into their headborne systems and improve the consistent seal of ear protection. The MARK is compatible with every major helmet type and the most popular electronic hearing protection. The MARK Kit will work with 3M Peltor Headsets right of the package. If attaching to Sordin/MSA style headsets, use the SARA Adapters (sold separately).

Constructed of impact-resistant polymer, the MARK is designed for use in the most austere environments.

Select options This product has multiple variants. The options may be chosen on the product page
-9%
Add to compare

Unity Tactical FUSION – Folding Backup Iron Sight

Out of stock

Original price was: $96.00.Current price is: $87.00.

The Folding Backup Iron Sight is a lightweight folding front sight that seamlessly integrates into the Unity FUSION and VTAC Micro hubs.

  • For use with Fusion Micro Hub / Micro Hub 2.0
  • Material: 6061-T6 Aluminum
  • Finish: Type 3 Hardcoat Anodized
Select options This product has multiple variants. The options may be chosen on the product page
-8%
Add to compare

Unity Tactical FUSION – Fixed Backup Iron Sight

Out of stock

$47.80 – $54.82
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Unity Tactical FUSION LightWing Adapter

Out of stock

$59.09 – $62.24
Select options This product has multiple variants. The options may be chosen on the product page
-4%
Add to compare

Unity Tactical FUSION Ring Light Mount – 1″

Out of stock

Original price was: $32.00.Current price is: $30.73.

The Ring Light Mount was designed to mount to nearly all of the other FUSION accessories and works with most 1″ diameter lights.

INTERFACE: 1″ Diameter Lights, Surefire P2x Fury, Surefire G2 Series, Surefire 6P Series, Inforce 6vx, Inforce 9vx, + More

Select options This product has multiple variants. The options may be chosen on the product page
-7%
Add to compare

Unity Tactical Remora MARK Mount

Out of stock

Original price was: $41.00.Current price is: $38.05.

The modern warrior’s helmet is a platform for command and control technology.  From lights and cameras to strobes and illuminators, helmets are uniquely able to point accessories where the operator’s eyes are facing.  This makes mounting visual and recording devices a paramount concern.

The Remora™ is an add-on accessory that integrates a FUSION™ interface into the MARK™ comms mounting system. It provides a lightweight, low profile platform for a variety of accessories such as task lights, digital recording devices, infrared illuminators, and more.  The FUSION™ footprint makes it compatible with all FUSION™ accessories.  So, operators can attach rings, M1913 rail, or direct-mount devices.  The Remora™ can be pivoted 15 degrees around the MARK™ hub, allowing light and camera angles to be customized.

Remora™ is compatible with all existing MARK™ systems and all mounting hardware is included. Available in black only.

View product
-6%
Add to compare

Unity Tactical M-LOK Vertical Fore-Grip VFG

Out of stock

$26.32 – $28.24

The Unity Tactical VFG is a perfect size Vertical Fore Grip for M-LOK rails.

  • 360-degree sloping sides provide increased grip-ability from all angles.
  • The unique shape creates a seamless grip flow from rail to VFG.
  • Weight: less than 1.5oz
  • Dimensions: 1.6 × 4.3 × 6.8 in
  • Includes all mounting hardware required for M-LOK handguards.
Select options This product has multiple variants. The options may be chosen on the product page
-17%
Add to compare

Unity Tactical KNUCKL Helmet Accessory Mounting Kit

Out of stock

$47.80 – $111.22

KNUCKL™ is a modular helmet accessory mount for use on helmets equipped with accessory rails such as Ops Core, Team Wendy, Crye and others. It offers tension-adjustable 3-axis articulation and the ability to mount up to two accessories depending on your mission. The mounting interfaces accept most Unity FUSION accessories. It also incorporates a socket to accept the Wilcox Retention Lanyard to retain the gear during a break-away.

NOTE: KNUCKL is not compatible with Team Wendy Helmets when used in conjunction with helmet mounted hearing protection. If you are looking for this combination, please look at MARK + REMORA for TW Helmets

  • KNUCKL Mount
  • Arc Adapter
  • Team Wendy Adapter
  • MPLS Adapter
  • Contour Camera Adapter
  • Rail Section
  • Mounting Hardware
  • Add Ons:
    • Wilcox Lanyard
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Unity Tactical FUSION Micro Hub 2.0

Out of stock

$76.76
Select options This product has multiple variants. The options may be chosen on the product page