AR-15 / M4 / M16

-4%
Add to compare

Esstac 5.56 Single KYWI Shorty Pouch

Out of stock

$23.00 – $33.00

With A straight forward, user friendly and highly intuitive design the single KYWI mag pouch is like no other. Utilizing a hybrid kydex and nylon design, you get all the rigidity you would expect from a kydex pouch and the lack of noise you want from a nylon pouch. These pouches feature a kydex wedge insert (KYWI) that provide the needed retention to secure your magazines without the need for bungee cord for rapid mag changes.

  • This pouch is made for STANAG magazines: AR15/M4 style magazines
  • AK magazines will NOT fit in this pouch
  • Kydex wedge insert (KYWI) provides retention
  • Hybrid kydex and nylon design
  • Pouch is 3.5″ tall
  • Requires mounting hardware
Select options This product has multiple variants. The options may be chosen on the product page
-21%
Add to compare

Reptilia DOT Mount Lower 1/3 Co-Witness for Trijicon MRO

Out of stock

$74.60 – $88.93

The DOT Mount™ by Reptilia is a lightweight, slim-line mounting solution for a variety of red dot optics.

  • Machined from billet 7075-T6 aluminum
  • Milspec Type III hard anodized finish
  • Lower 1/3 co-witness
  • Spring-loaded nitrided steel clamp
  • Anti-snag design
  • 100% made in the USA
  • 1.5 oz
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Geissele Automatics Super Precision SOPMOD Certified Vortex 1-6 Scope Mount – 30mm

Out of stock

$332.00 – $357.00

SOPMOD Certified Super Precision Scope Mount, specifically made to be used with Vortex 1-6 Scopes.

  • Currently in use by top tier military and counter-terrorism units throughout the U.S. Special Operations Command (USSOCOM).
  • SOPMOD is a USSOCOM program that allows Special Operations personnel to configure their weapons to individual preferences and mission requirements. The program is an approved accessory system for the M4A1 carbine, FN SCAR Mk 16/17 and other weapons used by USSOCOM.
  • Performance and reliability are top priority when it comes to developing products for USSOCOM, and now civilians can own the same combat proven products found in the hands of these top tier units.
Select options This product has multiple variants. The options may be chosen on the product page
-30%
Add to compare

Seekins Precision ProComp 10X Rifle Stock for AR Platform

Out of stock

Original price was: $195.00.Current price is: $135.78.
View product
Add to compare

BT46-LW17 PSR Atlas Bipod Standard height w/ ADM QD Lever

Out of stock

$310.00

The BT46-LW17 PSR (Precision Sniper Rifle) Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-170-S lever. It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. Available in black only.

The BT46-LW17 was selected for the SOCOM PSR (Precision Sniper Rifle) Weapons System.

  • Height Range: 4.75 – 9.0″ approximately
  • Preloaded Pan: 15 degrees +/-
  • Preloaded Cant: 15 degrees +/-
  • Fore and Aft pivot limiting Bosses
  • 5 leg positions: 0, 45, 90, 135 and 180 degrees
  • Non-Rotating Legs: outer leg does not rotate around inner leg
  • Larger, stronger inner legs
  • Weight: 13.61 ounces
View product
-10%
Add to compare

Rosco Manufacturing 16″ .223 Wylde Purebred Barrel (1/8 Twist)

Out of stock

Original price was: $221.00.Current price is: $198.90.
View product
Add to compare

Geissele Super Precision Scope Mount – 34mm – Standard Height

Out of stock

$332.00 – $357.00

The AR-15/M4 Super Precision series of scope mounts are optimized for use with an AR-15/M4 upper. These mounts use Geissele’s update of the classic nut and bolt method for clamping the mount to the picatinny rail, which is the most secure method of attaching your scope to your weapon.

  • Mounting surface spans 7 picatinny sections and utilizes 4 shear lugs
  • Each nut and bolt combination provides 1,400 pounds of clamping force
  • Tube Size: 34mm
  • Height: Standard (1.54″)
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Geissele Super Precision Scope Mount – 30mm – Extended – Standard Height

Out of stock

$332.00 – $357.00

The AR-15/M4 Super Precision series of scope mounts are optimized for use with an AR-15/M4 upper.

  • Mounting surface spans 7 picatinny sections and utilizes 4 shear lugs
  • Mounts use Geissele’s update of the classic nut and bolt method for clamping the mount to the picatinny rail
  • Each nut and bolt combination provides 1,400 pounds of clamping force, much more than any lever mounting arrangement
  • Tube Size: 30 mm
  • Height: Standard (1.54″)
Select options This product has multiple variants. The options may be chosen on the product page
-48%
Add to compare

Geissele Super Precision – MRO Series Optic Mounts

In stock

$69.98 – $155.00
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Geissele Super Precision Scope Mount – 30mm – Standard Height

Out of stock

$332.00 – $357.00

The AR-15/M4 Super Precision series of scope mounts are optimized for use with an AR-15/M4 upper.

  • Mounting surface spans 7 picatinny sections and utilizes 4 shear lugs
  • Mounts use Geissele’s update of the classic nut and bolt method for clamping the mount to the picatinny rail
  • Each nut and bolt combination provides 1,400 pounds of clamping force
  • Tube Size: 30 mm
  • Height: Standard (1.54″)
Select options This product has multiple variants. The options may be chosen on the product page
-36%
Add to compare

Geissele Super Precision – T1 Series Optic Mount

In stock

$98.98 – $154.02
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Geissele Super Precision Scope Mount – 30mm – 2.04″ Height

Out of stock

$325.00 – $350.00

The Super Precision 2.04″ Scope Mount was developed specifically for scenarios such as shooting while wearing a gas mask.

  • Optimal height for the optic to clear most common range finders, lasers or IR devices such as a PEQ15
  • Precision machined from a single piece of 7075-T6 high strength aluminum
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Geissele Super Precision Scope Mount – 30mm – 1.93″ Height

Out of stock

$325.00 – $350.00

The Super Precision 1.93″ Scope Mount was developed specifically for scenarios such as shooting while wearing a gas mask. 1.93″ is also an optimal height for the optic to clear most common range finders, lasers or IR devices such as a PEQ15. These mounts are precision machined from a single piece of 7075-T6 high strength aluminum.

  • Available in black Type 3 hard coat anodize as well as our proprietary DDC (Desert Dirt Color) type 3 hard coat anodize.
  • Utilizing Geissele’s update of the classic nut and bolt method, this mount will attach your optic to your weapon with 2,800 pounds of clamping force, and features 4 shear lugs for maximum rigidity and return to zero.
Select options This product has multiple variants. The options may be chosen on the product page
-31%
Add to compare

SB Tactical SBA4 Pistol Stabilizing Brace

Out of stock

$116.83 – $119.18

Designed for all platforms capable of accepting a mil-spec carbine receiver extension, the SBA4™ is 5-position adjustable, offers the user enhanced cheek weld ergonomics, and features an integral, ambidextrous QD sling socket.

  • Designed after the SBM4™
  • 5-position adjustable
  • Integral, ambidextrous QD sling socket
  • ATF compliant
  • US veteran designed
  • Proudly made in the USA

Note:

The ATF has determined that attaching a Pistol Stabilizing Brace to a firearm does NOT alter the classification of the firearm or subject the firearm to NFA control.

Select options This product has multiple variants. The options may be chosen on the product page
-21%
Add to compare

Reptilia DOT Mount for Aimpoint ACRO

Out of stock

$74.60 – $90.13

The DOT Mount™ by Reptilia is a lightweight, slim-line mounting solution for a variety of red dot optics. Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish, the DOT Mount attaches to any M1913 Picatinny rail, and offers lower 1/3 co-witness with standard AR15-style back-up sights. Its spring-loaded nitrided steel clamp and mounting bolt simplify the installation process, and sit flush with the body of the mount for a low-profile, anti-snag design.

  • Type III hardcoat anodized 7075-T6 aluminum
  • Nitrided 4140 steel
  • 2 oz
  • 100% made in the USA
  • Lifetime warranty
Select options This product has multiple variants. The options may be chosen on the product page
-16%
Add to compare

Rosco Manufacturing 16″ 300 Blackout Purebred Barrel (1/8 Twist)

Out of stock

Original price was: $249.00.Current price is: $209.32.
View product
-18%
Add to compare

Rosco Manufacturing 10.5″ 300 Blackout Purebred Barrel (1/7 Twist)

Out of stock

Original price was: $200.00.Current price is: $163.66.

This Rosco Purebred 10.5″ 300 Blackout Barrel was designed for SBR/ Pistol use in conjunction with suppressors. The 10.5” Rosco barrel was made to be a direct precision replacement for any MK 18 platforms that are currently in 5.56 NATO. The 10.5” barrel is also perfect for carbines which require a slightly longer rail in order to run PEQ-15’s, D-BAL (series), or any laser aiming devices comfortably. ALL NFA RULES APPLY!

View product
-10%
Add to compare

Rosco Manufacturing 16″ 300 Blackout Bloodline Barrel (1/8 Twist)

Out of stock

Original price was: $198.00.Current price is: $178.20.

This Rosco 16” 300 Blackout barrel is perfectly suited for carbines shooters that plan on running only supersonic ammo, or are building a well-balanced hunting platform.

  • Barrel Length: 16″
  • Barrel Weight: 30.01 Oz
  • Barrel Material: 4150 CMV
  • Barrel Caliber: 300 BLK
  • Barrel Profile: Heavy
  • Twist: 1/8
  • Barrel Thread: 5/8 x 24
  • Gas Block Size: .750
  • Gas System Length: Pistol
  • Barrel Crown: 11 Degree
  • Barrel Finish: Nitride
  • Barrel Extension Finish: Nitride
View product
-5%
Add to compare

Reptilia CQG Grip for AR-15/SR-25, SIG MPX/MCX & FN SCAR

Out of stock

$20.95 – $23.12

The CQG grip has been specifically designed to enhance ergonomics and performance of compact sized short-barreled rifles, AR15 pistols, pistol caliber carbines, and PDWs. Compatible with the AR15/M16, AR10/SR25™, SIG MPX/MCX™, and FN SCAR ® platforms. It supports a wide range of hand sizes and weapon configurations, featuring a more pronounced vertical grip angle, anti-slip front and rear texture, and an enhanced beaver tail design; the CQG encourages the shooter’s hand to be positioned higher on the grip, for greater control and improved comfort.

  • Impact-Modified Reinforced Nylon
  • Fits AR15/AR10/SR25/MCX/FN SCAR 16 and 17 Pattern Hosts
  • 77 grams
  • NSN: 1015-01-674-6753
  • MADE IN USA
Select options This product has multiple variants. The options may be chosen on the product page
-31%
Add to compare

SB Tactical SBA3 Pistol Stabilizing Brace w/ 6 Position Milspec Receiver Extension (SBA3-01-SB)

Out of stock

$116.76 – $118.17

Designed for all platforms capable of accepting a mil-spec carbine receiver extension, the SBA3 is 5-position adjustable, dramatically enhances versatility, and features a minimalist design with an integral, ambidextrous QD sling socket.

  • Minimalist design
  • 5-position adjustable
  • Includes 7075 mil-spec carbine receiver extension
  • Integral, ambidextrous QD sling socket
  • ATF compliant, US veteran designed and proudly made in the USA
  • Product includes: brace, mil-spec carbine receiver extension, adjustable nylon strap
Select options This product has multiple variants. The options may be chosen on the product page
-14%
Add to compare

Arisaka Defense Vertical Grip for KeyMod Rails

In stock

Original price was: $35.00.Current price is: $30.00.

The Arisaka Defense Vertical Grip is a robust, minimal grip for KeyMod handguards. It features a radiused profile at the top which tapers to meet the mounting surface on the handguard, giving a low-profile feel and ergonomic comfort. Twin mounting screws ensure secure attachment. The grip is hollow, with no end-cap.

  • Height: 2.50″
  • Width: 1.30″
  • Weight: 1.8 oz
  • CNC machined from 6061-T6 aluminum
  • MIL-A-8625 Type III hard coat anodized.
  • Requires a 9/64″ Allen wrench for installation (not included).
  • Made in the USA.
Add to cart
-26%
Add to compare

SureFire X400V-B-IRC Vampire IR Weapon Light – White and IR Output (T-Slot Clamp)

Out of stock

Original price was: $879.00.Current price is: $651.52.

The SureFire X400V IRc is a highly versatile dual-spectrum handgun WeaponLight that also boasts an integral Class 1 infrared-laser sight for use with night vision devices (NVD). This groundbreaking X400 model—which also mounts to long guns with MIL-STD-1913 rails—features a white-light and an infrared LED in its innovative V-Series head that will meet virtually any mission requirement.

  • Virtually indestructible infrared and white-light LEDs regulated to maximize output and runtime
  • TIR lens shapes focused high-intensity beam with significant reach and ample surround light for peripheral vision
  • Features integral commercially available infrared laser sight <0.7 milliwatts (850 nm)
  • Recoil-proof Nylok® adjustment screws—laser sight holds zero
  • Quick-detach rail clamp with adapters for Universal and MIL-STD-1913 (Picatinny) rails
  • Accepts optional pistol grip and long gun tape switches
  • Weatherproof—O-ring and gasket sealed
  • Constructed of high-strength aerospace aluminum with Mil-Spec hard anodizing; impact-resistant polymer; coated, tempered window
  • Includes high-energy 123A batteries with 10-year shelf life
  • Backed by SureFire’s No-Hassle Promise
View product
-10%
Add to compare

SureFire X400U-A Ultra High Output Weapon Light 1,000 Lumen w/ Laser

Out of stock

$611.00 – $719.00
Select options This product has multiple variants. The options may be chosen on the product page
-10%
Add to compare

SureFire X300V-B Vampire IR Weapon Light – White and IR Output (T-Slot Clamp)

Out of stock

Original price was: $499.00.Current price is: $449.00.
View product
-10%
Add to compare

SureFire X300U-B Ultra High Output Handgun Light 1,000 Lumen (T-Slot Clamp)

Out of stock

Original price was: $379.00.Current price is: $341.00.
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Arisaka Defense Side Scout Mount Picatinny (SSM-P)

Out of stock

$49.98 – $50.00

The Arisaka Side Scout Mount (SSM) is designed for use with Surefire Scout Lights, the Arisaka 300 and 600 Series, and the Streamlight Protac Rail Mount lights. It replaces the stock Picatinny rail adapter with a low profile mount that tucks the light underneath either side of the ATPIAL laser/illuminator series, including the ATPIAL-C, AN/PEQ15, and LA-5/PEQ. It will also allow the light to clear the QD lever on the Steiner DBAL I2, A3, and D2.

Light Compatibility:

  • Surefire M300A. M300B, M300C, M600B, M600C, M600P, M600U, M600V, M600DF,
  • Streamlight Protac Rail Mount 1, 2 and HL-X
  • Arisaka 300 and 600 Series.
Select options This product has multiple variants. The options may be chosen on the product page
-7%
Add to compare

SureFire M600V – White and IR Output Scout Light 350 Lumen Flashlight

Out of stock

$415.70 – $448.54

The SureFire M600V provides both white light and infrared illumination powered by a single 123A battery. Select the appropriate spectrum for the situation at hand by simply rotating the bezel. This rugged WeaponLight features SureFire’s proprietary TIR lens, a far-reaching, high-intensity beam with ample surround light.

  • Virtually indestructible IR/white LEDs are regulated to maximize light output and runtime
  • On-the-fly switching between white-light and IR mode — no IR filter required
  • TIR lens shapes versatile beam with enough reach and surround light for medium- to longer-range operations
  • Hard Anodized aluminum body, tempered window & O-ring seals make light rugged, durable, and combat ready
  • Activation via Z68 momentary/constant-on pushbutton switching with protective shroud
  • Thumbscrew mount attaches quickly & securely to MILSTD-1913 rails
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Cloud Defensive KeyMod Light Control System, Mount for SureFire ST07 Tape Switch – LCSmk1-d

Out of stock

$64.87
  • Unique Patented design utilizes a slot that ensures a snug, perfect friction-fit for the tape switch. Once installed its not coming out unless you want it to.
  • Precision CNC machined from Certified 6061 aluminum for superior strength.
  • Proprietary dual cable control channels machined into the one-piece mount.
  • Proprietary “Early Cable Exit” machined into each cable control channel. This allows you to only use part of the cable control channel should you need more slack in the cable to span across the handguard, et.
  • 100% MADE IN THE USA
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Arisaka Defense Side Scout Mount KeyMod (SSM-K)

Out of stock

$37.00 – $42.00

The Arisaka Side Scout Mount (SSM-K) for KeyMod rails is designed for use with Surefire Scout Lights, the Arisaka 300 and 600 Series, and the Streamlight Protac Rail Mount lights. It replaces the stock Picatinny rail adapter with a low profile mount for M-Lok handguards, and tucks the light underneath either side of the ATPIAL laser/illuminator series, including the ATPIAL-C, AN/PEQ15, and LA-5/PEQ. It will also allow the light to clear the QD lever on the Steiner DBAL I2, A3, and D2.

  • Length: 1.265″
  • Thickness: 0.2″
  • Weight: 0.6 oz
  • CNC machined from 6061-T6 aluminum
  • MIL-A-8625 Type III hard coat anodized.
  • Includes necessary screws to attach light body to mount.
  • Requires a T15 and IP20/T20 Torx driver for installation (not included).
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Midwest Industries AR-15 Blast Diverter for 5.56/.223 (1/2×28)

Out of stock

$39.33
  • Linear comp design diverts muzzle blast forward
  • Constructed of tool steel with a phosphate finish
  • 1/2 — 28 threads for 5.56/.223 pistols or rifles
  • 4.1 oz weight
  • 1.75 inches length
  • 1.090″ outside diameter
  • Includes new crush washer
  • 100% made in the U.S.A.
  • Lifetime Warranty
View product
Add to compare

Arisaka Defense Side Scout Mount M-LOK (SSM-M)

Out of stock

$44.38 – $48.59
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

BCM Gunfighter M-LOK Vertical ForeGrip VG-MCMR-MOD-3

Out of stock

$21.98

BCMGUNFIGHTER™ Vertical Grip Mod 3 (M-LOK® Compatible)

Direct Attach Version

  • Low-profile length for increased mobility and decreased “snag” factor.
  • The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
  • Can be mounted in reverse angle to increase control when grabbing handguard and grip.
  • Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations.
  • A lightweight design at 1.9 ounces.
  • Made in the U.S.A., manufactured from high quality, impact resistant polymers.
Select options This product has multiple variants. The options may be chosen on the product page
Load more products
Loading...