AR-15 / M4 / M16

-13%
Add to compare

BCM Gunfighter Short Vertical ForeGrip VG-S Picatinny

Out of stock

Original price was: $45.00.Current price is: $39.05.
  • Low-profile length for increased mobility and decreased “snag” factor.
  • The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
  • Can be mounted in reverse angle to increase control when grabbing handguard and grip
  • Flat sides give better yaw control to the shooter during firing and non-firing manipulations.
  • Aggressive texture and storage volume combined with modular design to allow improvements and adaptation in the future.
  • Cross bolt designed to work with improvised tools (such as a quarter) and allow for easy adjustment or re-tightening.
  • Reversible clamps allow user to set up fasteners to reside on either side.
  • Spring-loaded clamps makes installation and removal easier.
  • Made in the U.S.A., and manufactured from high quality, impact resistant polymers.

*Test fit to ensure proper function (may display attributes consistent with this QC process)

Select options This product has multiple variants. The options may be chosen on the product page
-8%
Add to compare

MFT EVOLV 5 Direction Compensator Muzzle Brake for 5.56 / .223

Out of stock

Original price was: $54.99.Current price is: $50.80.

Disperses gas in 6 distinct directions. This feature aids in wide gas flow to limit recoil and muzzle climb. There are slots all the way around. Slim profile matches the contour of the M4 style AR barrel, making for that clean, sleek transition.

• For 5.56/.223 caliber
• 2 Multi-port gas flow aids in recoil reduction
• 416 Stainless Steel
• Black Nitride Finish
• Milspec Crush Washer Included – 17PH4 Stainless Steel pre-hardened
View product
Add to compare

MFT EVOLV 3 Pronged Ported Muzzle Brake for 5.56/.223 (1/2×28)

Out of stock

$47.82

Reduces muzzle brake with the aid of 4 ports on top. The 2 ports on either side direct gas horizontally keeping recoil to a minimum. The front three prongs help direct the remaining gas and concussion forward from the shooter. All these elements make up a very comfortable muzzle brake for indoor and outdoor shooters. Where other muzzle brakes direct gas only horizontally MFT’s comp takes it a step further.

View product
-10%
Add to compare

SureFire SR-D-IT Remote Dual Switch Assembly for Weaponlight + ATIPAL Laser Device

Out of stock

Original price was: $139.00.Current price is: $125.00.

The SR-D-IT provides remote momentary-on activation, either separately or simultaneously, for two weapon-mounted illumination tools—a SureFire WeaponLight and an ATPIAL or DBAL laser. Separate plug-in cables connect each device to the switch platform, where two pressure-pad switches are integrated with a single snap-on clamp for easy attachment to your firearm’s Picatinny rail forend.

  • Momentary-on switch activates SureFire WeaponLight and an ATPIAL or DBAL laser
  • Weatherproof plugs and pressure pad switches
  • Snap-on clamp for Picatinny rails
  • Available with 7 inch switch cable
View product
Add to compare

Arisaka Defense Inline Scout Mount – KeyMod

Out of stock

$40.66 – $42.00

The Patented Arisaka Inline Scout Mount is designed specifically for the Surefire Scout Light M600 and M300 series weapon lights, the Arisaka 300 and 600 Series Lights, and the Streamlight Protac Rail Mount 1 and 2. It replaces the stock Picatinny rail adapter with a low profile mount for KeyMod handguards.

  • Length: 3.0”.
  • Height: 0.20″ (at Surefire Scout Light mounting point).
  • Weight: 0.5 oz.
  • Material: CNC machined from 7075-T6 aluminum.
  • Finish: MIL-A-8625 Type III hard coat anodized.
  • BCM KeyMod screws are covered under US Patent 9377274.
  • Includes necessary screws to attach light body to mount.
  • Made in the USA.
Select options This product has multiple variants. The options may be chosen on the product page
-5%
Add to compare

Midwest Industries Two Chamber AR-15 Muzzle Brake

Out of stock

Original price was: $50.95.Current price is: $48.26.
  • Large two chamber design reduces muzzle climb
  • Constructed from tool steel with a phosphate finish
  • 1/2-28 threads for 5.56/.223 rifles
  • Includes new crush washer
  • 100% made in the U.S.A.
  • Lifetime Warranty
Weight 3oz
View product
Add to compare

Midwest Industries 3 Chamber AR-15 Muzzle Brake (1/2×28)

Out of stock

$45.02
View product
-4%
Add to compare

Dead Air KeyMo Muzzle Brake

Out of stock

$85.30 – $89.00
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

CMMG Compensator SV Muzzle Brake

Out of stock

$56.10 – $58.77

The SV muzzle brake from CMMG effectively eliminates much of the felt recoil and nearly all muzzle rise for lighting fast follow-up shots.

The SV Brake is also available for .30 caliber models (Part #38DA54C). Includes muzzle brake and crush washer.

Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Arisaka Defense Ring Light Mount for M-LOK or KeyMod

Out of stock

$49.98
Select options This product has multiple variants. The options may be chosen on the product page
-1%
Add to compare

Cloud Defensive M-LOK Light Control System, Mount for SureFire ST07 Tape Switch – LCSmk1-g

Out of stock

Original price was: $72.09.Current price is: $71.59.
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Arisaka Defense QD Mount for KeyMod – Quick Detach Sling Swivel Mount

Out of stock

$23.00

The Arisaka QD Mount is a low profile design for KeyMod handguards. It features an anti-rotation interface, allowing for 8 different positions, and accepts all standard QD sling swivels, as well as the Geissele/ALG Defense forged QD sling swivel. The use of BCM’s patented reverse threaded KeyMod screws allows the mount to be extremely thin.

  • Height: 0.167”
  • Weight: 0.19 oz
  • CNC machined from 6061-T6 aluminum and MIL-A-8625 Type III hard coat anodized.
  • Requires a T15 Torx wrench for installation (not included).
  • BCM KeyMod screws are covered under US Patent 9377274.
  • Made in the USA.
View product
-17%
Add to compare

Cloud Defensive LCS w/ Streamlight HL-X ProTac Rail Mount 1000 Lumen

Out of stock

$166.09 – $197.06

The Cloud Defensive LCS / HLX Kit is a popular bundle option for those looking to pair the Light Control System with Streamlight’s ProTac HL-X weapon-light. The kit gets you the picatinny version of the LCSmk2, and the 1000 lumen Streamlight ProTac HLX (Rail Mount Version).

  • The LCSmk2k is designed exclusively for the Streamlight ProTac series weaponlights Dual-Function tape switch that is commonly provided with the Streamlight ProTac series weaponlights. The LCSmk2k is TOO LONG for the shorter Streamlight 69132 switch provided with the TLR-series.
  • Unique Patent-Pending design utilizes a slot that ensures a snug, perfect friction-fit for the tape switch. Once installed its not coming out unless you want it to.
  • “Early Exit” feature allows the user to route the cable into the LCS and then exit the mount early if more cable slack is needed for your given setup.
  • The LCS Series Locks up 100% to your weapon. Zero movement. Zero play. Virtually indestructible.
Select options This product has multiple variants. The options may be chosen on the product page
-3%
Add to compare

Cloud Defensive Light Control System for SureFire ST07 – LCSMK1A

Out of stock

$64.87 – $69.99

The LCS Series. No more rubber bands. No more zip ties or wire or Velcro or duct tape. No more makeshift attachment methods that annoy you and fail you. No more compromising with the light activation your life depends on.

  • This LCSmk1 mount is designed for the Surefire ST07 Remote Tape Switch for Weapon lights. The same tape switch that is often supplied with the Surefire Scout series. The ST07 Tape Switch fits: SureFire Weapon Lights with plug sockets, including Millennium Universal, Classic Universal, Scout Light fitted with socketed tailcap, X300 and X400 with XT tailcap assembly.
  • When properly fitted with the SureFire socketed tail cap, this product is also compatible with the Arisaka Defense Scout Series lights.
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Arisaka Defense Low Profile Picatinny Rail – M-LOK

Out of stock

$27.00 – $30.00

The Arisaka Low Profile Picatinny Rail is a 5 or 3 slot Picatinny rail for M-LOK handguard systems. It offers a reduced height to pull any Picatinny accessories closer to the handguard.

  • Picatinny slots: 5 or 3
  • Height over mounting surface: 0.277″
  • Length: 2.15″ (5 slot), 1.37″ (3 slot)
  • Weight: 0.7 oz (5 slot), 0.4 oz (3 slot)
  • CNC machined from 6061-T6 aluminum and MIL-A-8625 Type III hard coat anodized.
  • Requires an IP25/T25 Torx driver for installation (not included).
  • Our M-LOK nuts are manufactured by Magpul.
  • Made in the USA.
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Arisaka Defense Low Profile Picatinny Rail – KeyMod

Out of stock

$27.00 – $30.00

The Arisaka Low Profile Picatinny Rail is a 5 or 3 slot Picatinny rail for KeyMod handguard systems. It offers a reduced height to pull any Picatinny accessories closer to the handguard.

  • Picatinny slots: 5 or 3
  • Height over mounting surface: 0.277″
  • Length: 2.15″ (5 slot), 1.37″ (3 slot)
  • Weight: 0.6 oz (5 slot), 0.4 oz (3 slot)
  • CNC machined from 6061-T6 aluminum and MIL-A-8625 Type III hard coat anodized.
  • Requires a T15 Torx wrench for installation (not included).
  • BCM KeyMod screws are covered under US Patent 9377274.
  • Made in the USA.
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Arisaka Defense Vertical Grip for M-LOK Handguards

Out of stock

$37.37
View product
Add to compare

Arisaka Defense Low Profile Finger Stop – Picatinny

Out of stock

$26.15 – $30.00

The Arisaka Finger Stop was developed as a low profile, minimal control accessory. This version is for 1913 Picatinny rails. It has a slim profile which is ergonomically designed to be located between your index and middle fingers. This typically places it further forward on the handguard, which means it doesn’t get in the way when transitioning to kneeling or prone shooting positions, where most people move their support hand towards the rear.

  • Height: 0.75” above 1913 Picatinny rail
  • Width: 0.68″
  • Weight: 0.4 oz
  • CNC machined from 6061-T6 aluminum
  • MIL-A-8625 Type III hard coat anodized
  • Requires a 3/32″ Allen wrench for installation (not included)
  • Made in the USA.
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Arisaka Defense QD Mount for M-LOK – Quick Detach Sling Swivel Mount

Out of stock

$24.74

The Arisaka Quick Detach (QD) Mount is a low profile design for M-Lok hand-guards. It features an anti-rotation interface and accepts all standard QD sling swivels, as well as the Geissele/ALG Defense forged QD sling swivel.

  • Height: 0.375″
  • Weight: 0.3 oz
  • CNC machined from 6061-T6 aluminum
  • MIL-A-8625 Type III hard coat anodized
  • Requires a 5/32″ Allen wrench for installation (not included).
  • Made in the USA.
View product
Add to compare

Arisaka Defense Low Profile Finger Stop – M-LOK

Out of stock

$26.35 – $30.35

The Patent Pending Arisaka Finger Stop was developed as a low profile, minimal control accessory. This version is for M-Lok rail systems.

  • Height: 0.85″
  • Width: 0.50″
  • Weight: 0.4 oz
  • CNC machined from 6061-T6 aluminum
  • MIL-A-8625 Type III hard coat anodized
  • Requires a 9/64″ Allen wrench for installation (not included)
  • Made in the USA.
  • Patent Pending.
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Arisaka Defense Low Profile Finger Stop – KeyMod

Out of stock

$25.00

The Patent Pending Arisaka Finger Stop was developed as a low profile, minimal control accessory. This version is for KeyMod rail systems.

  • Height: 0.85″
  • Width: 0.50″
  • Weight: 0.4 oz
  • CNC machined from 6061-T6 aluminum
  • MIL-A-8625 Type III hard coat anodized
  • Requires a 9/64″ Allen wrench for installation (not included)
  • Made in the USA.
  • Patent Pending.
View product
Add to compare

Arisaka Defense Offset Scout Mount – M-LOK

Out of stock

$48.00 – $49.98

The Patent Pending Arisaka Offset Scout Mount is designed specifically for the Surefire Scout Light M600 and M300 series weapon lights, the Modlite PLH and OKW weapon lights, the Arisaka 300 and 600 Series Lights, the Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser), and Olight Odin. It replaces the stock Picatinny rail adapter with a low profile mount for M-Lok handguards. The Offset Scout Mount is very low profile at less than 0.20″ thick.

  • Weight: 0.4 oz
  • Length: 1.265”
  • CNC machined from 6061-T6 aluminum
  • MIL-A-8625 Type III hard coat anodized.
  • Requires an IP25/T25 and IP20/T20 Torx driver for installation (not included)
  • M620 series lights can also be used with the Offset Scout Mount with the addition of the Arisaka Offset M620 Adapter.
  • Includes necessary screws to attach light body to mount.
  • Made in the USA.
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Arisaka Defense Offset Scout Mount – KeyMod

Out of stock

$49.98 – $50.00

The Patent Pending Arisaka Offset Scout Mount is designed specifically for the Surefire Scout Light M600 and M300 series weapon lights, the Arisaka 300 and 600 Series Lights, and the Streamlight Protac Rail Mount 1, 2 and HL-X. It replaces the stock Picatinny rail adapter with a low profile mount for KeyMod handguards. The Offset Scout Mount uses BCM’s patented inverted KeyMod screws, which allows it to be less than 0.20″ thick.

  • Length: 1.265”
  • Weight: 0.4 oz
  • CNC machined from 6061-T6 aluminum
  • MIL-A-8625 Type III hard coat anodized
  • Includes necessary screws to attach light body to mount
  • Requires a T15 Torx and 5/64″ Allen wrench for installation (not included)
  • BCM KeyMod screws are covered under US Patent 9377274
  • M620 series lights can also be used with the Offset Scout Mount with the addition of the Arisaka Offset M620 Adapter.
  • Made in the USA.
Select options This product has multiple variants. The options may be chosen on the product page
Add to compare

Arisaka Defense Offset Picatinny Mount – M-LOK

Out of stock

$55.52

The Patent Pending Arisaka Offset Picatinny Mount is a combination of our Offset Scount Mount and Picatinny adapter, and is meant for use with Picatinny based lights like the Surefire X300 or Inforce WML, plus other rail mounted accessories.

  • Length: 1.77″
  • Height: 0.20″ (at Surefire Scout Light mounting point)
  • Weight: 1.0 oz
  • The mount is CNC machined from 6061-T6 aluminum and MIL-A-8625 Type III hard coat anodized
  • Requires a 5/64″ Allen wrench for installation (not included).
  • Made in the USA
View product
Add to compare

Arisaka Defense Offset Picatinny Mount – KeyMod

Out of stock

$60.00

The Patent Pending Arisaka Offset Picatinny Mount is a combination of our Offset Scount Mount and Picatinny adapter, and is meant for use with Picatinny based lights like the Surefire X300 or Inforce WML, plus other rail mounted accessories. The Offset Picatinny Mount uses BCM’s patented inverted KeyMod screws, which allows the base to be less than 0.165″ thick.

  • Length: 1.77″
  • Height: 0.20″ (at Surefire Scout Light mounting point)
  • Weight: 1.0 oz
  • The mount is CNC machined from 6061-T6 aluminum and MIL-A-8625 Type III hard coat anodized
  • Requires a T15 Torx and 5/64″ Allen wrench for installation (not included)
  • BCM KeyMod screws are covered under US Patent 9377274
  • Made in the USA
View product
Add to compare

Arisaka Defense Inline Scout Mount – M-LOK

Out of stock

$37.37 – $44.38
Select options This product has multiple variants. The options may be chosen on the product page
-10%
Add to compare

Cloud Defensive Light Control System for Streamlight ProTac Switch – LCSMK2

Out of stock

$63.05 – $69.99

The absolute best mounting solution for tape/pressure switches used to operate the Streamlight HLX ProTac Series Weaponlights. No more rubber bands. No more zip ties or wire or Velcro or duct tape. No more makeshift attachment methods that fail you. No more compromising with the light activation your life depends on.

  • The LCSmk2k features an “Early Exit” feature for the cables. This allows you to run the cable half-way through a given cable channel and then exit the bracket “early” if need more cable slack for a given setup.
  • The LCS Series Locks up 100% to your weapon. Zero movement. Zero play. Virtually indestructible.
  • Low-profile design with heavily radiused/chamfered edges ensure comfort and ergonomic function.
  • Weight with screws: 53 grams (1.9 oz)
  • Length: 3.5″
  • Width: 1.32″
  • Height: .575″ (switch sits .052″ above top edge of rail)
  • 100% MADE IN THE USA
Select options This product has multiple variants. The options may be chosen on the product page