AR-15 / M4 / M16

The Arisaka Side Scout Mount (SSM) is designed for use with Surefire Scout Lights, the Arisaka 300 and 600 Series, and the Streamlight Protac Rail Mount lights. It replaces the stock Picatinny rail adapter with a low profile mount for M-Lok handguards, and tucks the light underneath either side of the ATPIAL laser/illuminator series, including the ATPIAL-C, AN/PEQ15, and LA-5/PEQ. It will also allow the light to clear the QD lever on the Steiner DBAL I2, A3, and D2.

The M-LOK MVG is a light weight, inexpensive vertical foregrip that attaches directly to M-LOK compatible hand guards and forends with no additional Picatinny rails required. Made from the same high quality polymer as other Magpul products, the M-LOK MVG uses the new Magpul TSP texture for positive control in all environments.

• With rounded contours and a shorter length, it has been optimized for use with the “thumb break method” of shooting and can also be used as a traditional vertical foregrip.
• All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.
• Weight, w/hardware: 1.4 oz.
• Length: 3.0″
• Made in U.S.A.

The Arisaka Finger Stop was developed as a low profile, minimal control accessory. This version is for 1913 Picatinny rails. It has a slim profile which is ergonomically designed to be located between your index and middle fingers. This typically places it further forward on the handguard, which means it doesn’t get in the way when transitioning to kneeling or prone shooting positions, where most people move their support hand towards the rear.

• Height: 0.75” above 1913 Picatinny rail
• Width: 0.68″
• Weight: 0.4 oz
• CNC machined from 6061-T6 aluminum
• MIL-A-8625 Type III hard coat anodized
• Requires a 3/32″ Allen wrench for installation (not included)
• Made in the USA.

The Patent Pending Arisaka Finger Stop was developed as a low profile, minimal control accessory. This version is for M-Lok rail systems.

• Height: 0.85″
• Width: 0.50″
• Weight: 0.4 oz
• CNC machined from 6061-T6 aluminum
• MIL-A-8625 Type III hard coat anodized
• Requires a 9/64″ Allen wrench for installation (not included)
• Made in the USA.
• Patent Pending.

The Arisaka Aimpoint Micro Mount is designed for the Aimpoint Micro T1 and T2 optics, and will also function with other red dots using the same footprint.

• Material: CNC machined from 7075-T6 aluminum.
• Finish: Type III hard-coat anodizing.
• Weight (including screws): 3.1 oz
• Picatinny clamp – 50 inch-lbs (5.7 Nm)
• Made in the USA

The Arisaka Low Profile Picatinny Rail is a 5 or 3 slot Picatinny rail for M-LOK handguard systems. It offers a reduced height to pull any Picatinny accessories closer to the handguard.

• Picatinny slots: 5 or 3
• Height over mounting surface: 0.277″
• Length: 2.15″ (5 slot), 1.37″ (3 slot)
• Weight: 0.7 oz (5 slot), 0.4 oz (3 slot)
• CNC machined from 6061-T6 aluminum and MIL-A-8625 Type III hard coat anodized.
• Requires an IP25/T25 Torx driver for installation (not included).
• Our M-LOK nuts are manufactured by Magpul.
• Made in the USA.

The Arisaka Side Scout Mount (SSM) is designed for use with Surefire Scout Lights, the Arisaka 300 and 600 Series, and the Streamlight Protac Rail Mount lights. It replaces the stock Picatinny rail adapter with a low profile mount that tucks the light underneath either side of the ATPIAL laser/illuminator series, including the ATPIAL-C, AN/PEQ15, and LA-5/PEQ. It will also allow the light to clear the QD lever on the Steiner DBAL I2, A3, and D2.

Light Compatibility:

• Surefire M300A. M300B, M300C, M600B, M600C, M600P, M600U, M600V, M600DF,
• Streamlight Protac Rail Mount 1, 2 and HL-X
• Arisaka 300 and 600 Series.

• Unique Patented design utilizes a slot that ensures a snug, perfect friction-fit for the tape switch. Once installed its not coming out unless you want it to.
• Precision CNC machined from Certified 6061 aluminum for superior strength.
• Proprietary dual cable control channels machined into the one-piece mount.
• Proprietary “Early Cable Exit” machined into each cable control channel. This allows you to only use part of the cable control channel should you need more slack in the cable to span across the handguard, et.
• 100% MADE IN THE USA

The MOE Grip (Magpul Original Equipment) is a drop-in upgrade for the standard AR15 / M4 pistol grip. The ergonomic, hand-filling design combines anti-slip texturing with storage core capability. With a similar shape to a ‘medium’ sized MIAD, the one-piece reinforced polymer construction provides simplicity and a reduced cost while still maintaining the durability needed to withstand operational environments. The MOE Grip accepts optional Storage Cores for gear stowage and includes a basic grip cap. All mounting hardware included.

• Made in U.S.A.
• Positive anti-slip texture
• Beavertail backstrap for enhanced ergonomics
• Storage core capability
• Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage
• Hard polymer bottom
• Prevents snags and damage
• One-piece reinforced polymer construction

Designed as a drop-in upgrade for the standard AR15/M4 pistol grip, The MOE-K Grip provides an extremely low profile and compact design with a steeper grip angle compared to more traditional styles. The more vertical grip angle is optimized for use on PDW (Personal Defense Weapon) configurations and improves comfort and control on short LOP rifles that bring the primary hand in closer to the shooter’s body. The thin profile and lack of backstrap ‘beavertail’ also makes it an excellent choice for shooters who prefer a smaller grip circumference. All mounting hardware included. Made in U.S.A.

• Replacement for AR15/M4 pistol-grip
• One-piece reinforced polymer construction
• More vertical grip angle than standard A2 grips
• Minimalist design provides for a compact and thin profile
• Aggressive TSP texture (Trapezoidal Surface Projections) for positive weapon control in all environments
• Specifications

Designed for all platforms capable of accepting a mil-spec carbine receiver extension, the SBA4™ is 5-position adjustable, offers the user enhanced cheek weld ergonomics, and features an integral, ambidextrous QD sling socket.

• Designed after the SBM4™
• 5-position adjustable
• Integral, ambidextrous QD sling socket
• ATF compliant
• US veteran designed
• Proudly made in the USA

Note:

The ATF has determined that attaching a Pistol Stabilizing Brace to a firearm does NOT alter the classification of the firearm or subject the firearm to NFA control.

Designed for all platforms capable of accepting a mil-spec carbine receiver extension, the SBA3 is 5-position adjustable, dramatically enhances versatility, and features a minimalist design with an integral, ambidextrous QD sling socket.

• Minimalist design
• 5-position adjustable
• Includes 7075 mil-spec carbine receiver extension
• Integral, ambidextrous QD sling socket
• ATF compliant, US veteran designed and proudly made in the USA
• Product includes: brace, mil-spec carbine receiver extension, adjustable nylon strap

Over a year in design, development, and testing. Bravo Company introduces the BCMGUNFIGHTER Stock. The strongest lightweight polymer stock available for your mil-spec receiver extension is here!

• Snag free Design. No sharp edges prevent tangling of the rifle with the shooter’s sling, molle gear, or other kit.
• Modular VBOST (Vehicle Borne Operations Sling Tab) – This tab interfaces with the shooter’s riggers’ band or bungee to secure the shooter’s sling against the stock when the carbine is not in use. Increasingly, this is the most common application when operating inside a vehicle.
• 2 different types of ambidextrous sling mounting options, including QD swivel sockets.
• Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.
• Available in Black, Flat Dark Earth, Foliage Green, and Wolf Gray.
• United States Patent Number: 9,109,855

MFT Battlelink™ Extreme Duty Minimalist Stock is built based on MFT’s popular Minimalist Stock platform. Recognizing the need for a more robust stock capable of withstanding long-term abuse delivered by larger caliber firearms such as tactical shotguns of 12 gauge or 7.62X51 AR-10 while remaining nimble enough for use on a 5.56.

• Weight: 8.5oz.
• Height: 4.85″
• Width: 1.59″
• Length: 7.71″
• Slide-on replacement for collapsible buttstock.
• Angled non-slip rubberized removable buttpad allows faster presentation.
• Multiple Sling Slots with single point mount points.
• Quick Detach Sling mounting point is positioned in the rear.
• Upper section provides enhanced cheek weld.
• A single MLOK connection point.
• Modular Buffer Tube Plunger System, reinforced with a metal chassis.