AR-15 / M4 / M16

RB5000L KynSHOT Marksman Recoil Buffer is identical in form to RB5000 but designed to work in AR15 .223 / 5.56 platforms with lower power ammunition including 300 Blackout and other subsonic rounds.

• Designed for 5.56mm/.223 cal. AR-15 with a collapsible stock (300 Blackout and other subsonic rounds)
• Drop-In Replacement
• Reduce felt recoil
• Improve reliability
• Reduce bolt carrier speed
• Reduce wear on parts
• Reduce shock and vibration to optics
• Suppress bolt bounce
• Decrease sight movement
• Smoother operation
• Faster shot recovery time
• Military-grade materials and manufacturing

Aero took a whole new approach when designing their Enhanced Carbine Buffer Tube by including features like carrier support extensions, position guide drain holes, and ramping the design of the tube.

• Material: 7075-T6 Aluminum
• Fully supports and guides the bolt carrier group into the buffer tube after a round is fired, preventing carrier tilt and unnecessary wear on key components.
• Ramped Tube Design allows for effortless installation of traditional carbine stocks.
• Simply hold down the adjustment piece and push your stock onto the Enhanced Buffer Tube.
• These features add reliability, security, and simplicity that traditional mil-spec buffer tube options historically overlook.

Finally, you can grab what GGP considers the best forged upper in the industry, and it is a perfect companion for your GGP Cornerstone Lower receiver.

• Material: Machined from forged 7075-T6 Aluminum.
• Finish: Black Hard anodized with a surface hardness of 60 Rockwell.
• M4 Feedramps.
• .250″ Takedown pin holes.
• Engraved T-marks.
• Compatability: Functions with nearly all available AR-15 parts kits and lowers.
• Match with GGB’s Cornerstone lower receiver for a solid and dependable fit.
• Stripped Receiver DOES NOT include port door, forward assist, or any small parts.
• Weight: 0.4 lbs.

The Greatest Bolt Carrier Group for your AR-15. The SWS Bolt Carrier Group is HP/MPI Tested – Auto Version – Machined to USGI Specifications, Phosphate Coated with use of OCKS (Optimized Carrier Key Screw) and properly staked using a MOMOAKS.

• Mil-spec Carpenter No. 158® Steel
• HPT Bolt – High Pressure Tested / Proof
• MPI Bolt – Magnetic Particle Inspected
• Shot Peened Bolt
• Chrome Lined Carrier – Auto
• Chrome Lined Gas Key
• Gas Key Hardened to USGI Specifications
• OCKS (Optimized Carrier Key Screw)
• Key Staked properly using a MOMOAKS.
• Tool Steel Extractor
• Sprinco Heavy Duty Extractor Spring
• Black Extractor Insert
• Machined to USGI Specification

The M4E1 Threaded Upper Receiver features a new angular machined design that helps it stand apart from standard mil-spec upper receivers.

• New enhanced forging that gives the upper receiver a “billet look”.
• New picatinny profile that blends seamlessly with our Enhanced and ATLAS Series Handguards.
• M4 Feedramps.
• .250 takedown pin holes.
• Includes threaded forward assist roll pin.
• Made In America.
• Platform: AR15.
• Material: Machined from 7075-T6 forged aluminum.
• Compatibility: Works with standard AR15/M16 components.
• Weight(s): 8.65 oz.
• Other: Barrel Nut Torque – 50 ft-lbs.
• Includes port door and forward assist.

The most natural grip for taking a squared-off stance. Your hand will naturally find its optimal position on the B5 Systems Type 23 P-Grip, thanks to its steep angle, extended tang, and palm-filling design. By ensuring proper trigger finger placement, this grip has been shown to improve shooting speed while correcting for any tendency to drift into a “chicken-wing” arm placement.

• Most up to date design featuring all-new aggressive texturing
• Constructed of durable composite
• Drop-in upgrade
• Weighs 2.40 Ounces

This compensator was not designed as a gamers comp. It was designed for tactical applications to reduce muzzle rise, flash signature, noise, and lateral pressure.

• Exterior dimensions consistent with Mil-specs for mounting flash hider mounted suppressors.
• Tuned slots and interior cone offer maximum in recoil mitigations, compensation of muzzle-rise, and flash reduction.
• Designed to have much less side blast and noise associated with typical compensators. Makes it perfect for working in teams for CQB. It is a compensator that is built for the 21st Century Gunfighter!
• Nitride treated for maximum corrosion resistance
• Includes a Crush Washer
• Should be installed by a qualified armorer.
• Threaded 1/2 x 28 for 5.56mm AR15 platforms.

Radian Weapons were kind enough to co-brand their popular Raptor™ Ambidextrous Charging Handle to Q’s specs for use in the Honey Badger by Q. The Raptor™ is truly revolutionary in design & function. From rapid palm “blading” or finger thumb charges of the weapon, the motion is fluid & fast from either strong or support side.

• Made in the USA from aircraft-grade 7075 aluminum
• Clear-coat mil-spec anodized.
• Size: AR15/M16

Meet the newest member of the Radian family: Raptor-LT.

• Fully ambidextrous design
• Machined from 7075 aluminum, MILSPEC Type III hard anodized
• Over-molded with high-strength, fiberglass reinforced polymer for the ultimate combination of strength, weight, and durability
• 100% designed and manufactured in the USA

The Talon™ ambidextrous safety selector is a modular design that can be installed as a standard 90° or as a 45° short throw by simply rotating the shaft 180° inside the lower receiver

• Precision machined dovetail interface
• Spring-loaded retention stud
• No screws to come loose or break
• Designed & Manufactured in the USA
• Billet aircraft grade aluminum w Milspec Type 3 Hard Coat Anodized Finish or Cerakote

For Aimpoint T1 and T2 optics. Also fits Holosun’s with side turret battery (Note- Holosun side Battery Tray versions will be Lower 1/3rd CW with this mount.)

• Available in Absolute Co-Witness, Lower 1/3rd, and 1.93″ Height
• 7075 Aircraft Grade Aluminum
• Mil-Spec Hardcoat Anodize
• Fits all Picatinny Receiver/ Rails
• Hardware Included
• Ultra-strong with built-in recoil lugs.
• Precision Return to Zero mount