AR-15 / M4 / M16

Radian is pleased to offer a variant of the Talon safety selector that features no weak side lever, for those who prefer this configuration to an ambidextrous setup. The Talon-GI comes with one long lever that is installed on a precision machined dovetail cut and retained with a spring-loaded retention stud to lock the lever in place – no screws to come loose or break. Patent Number: US9557128

• The Talon-GI can be configured in either a 45-degree short-throw or standard 90-degree configuration.
• The safety features a “safe” and “fire” indicator on the weak side of the safety cylinder.

The Talon™ ambidextrous safety selector is a modular design that can be installed as a standard 90° or as a 45° short throw by simply rotating the shaft 180° inside the lower receiver.

• Precision machined dovetail interface
• Spring-loaded retention stud to lock the lever in place
• No screws to come loose or break
• Designed & Manufactured in the USA
• Billet aircraft grade aluminum w Milspec Type 3 Hard Coat Anodized Finish or Cerakote

HELIX 9.5″ MLOK Handguard

• 9.5″ Exact top rail length
• 7.1 oz. with barrel nut and hardware
• Excellent feel for todays modern shooters
• MLOK accessory compatible
• 4 Built in QD swivel mounting points front and rear on right and left side
• No timing of barrel nut required, no shims needed
• Works with any receiver forged or billet
• ​1.35″ ID
• Mil-Spec Hardcoat Anodize
• 7075 Barrel nut w/ Hardcoat Anodize
• Melonite Finish Hardware
• Free Floating Design
• Proven Slip fit locking mount design, much more secure than a clamp type mount.
• Billet Anti Rotation Insert (black insert included)
• Proven Anti Slip Design keys into barrel nut
• Barrel nut uses standard wrenches or SLR Billet wrench for perfect fit
• Mil-Spec 1913 Mounting rails

Helix 11.7″ MLOK Handguard

• 11.7″ Exact Top Rail Length
• 8.0 oz. including barrel nut and hardware
• Excellent feel for today’s modern shooters
• No timing of barrel nut required, no shims needed
• Works with any receiver forged or billet
• ​1.35″ ID
• Mil-Spec Hardcoat Anodize
• 7075 Barrel nut w/ Hardcoat Anodize
• Melonite Finish Hardware
• Free Floating Design
• Proven Slip fit locking mount design, much more secure than a clamp type mount.
• Billet Anti Rotation Insert (black insert included)
• Proven Anti Slip Design keys into barrel nut
• Barrel nut uses standard wrenches or SLR Billet wrench for a perfect fit
• Mil-Spec 1913 Mounting rails

TGF (Trigger Guard, Forward Controls) is designed for use with TDP spec forged lower receivers, and fills the gap forward of the pistol grip, between the trigger guard “ears”. The winter version has as much constant/unchanged space from the trigger bow forward as possible (instead of the space inside tapering and decreasing as the trigger guard nears the receiver’s front trigger guard holes).

• Available in anodized black, desert tan, and OD green.
• Lower receivers made from Cerro Forge “keyhole” forgings generally have taller trigger guard ears, as do Colt, LMT, and BCM lower receivers.
• Please note ZEV produced lower receivers appear to have shorter trigger guard ears, and these shortened ears expose a bit of the bottom of the TGF, as shown below. This has no bearing on functionality. The latest Mega lowers (with the old Mega atomic whirl) has been reported to have long ears that do cover the TGF.
• TGF is proudly designed and made in the USA. A trigger guard roll pin and set screw (for the front) are included. A 1/16 Allen wrench is required (not included).
• TGF is machined from 7075 aluminum.

ESF (End plate, Sling Adapter, Forward Controls Design) is a drop-in end plate replacement for the AR platform (both 223 and 308 specs) featuring 3 QD swivel sockets.

• Machined from 4140 steel.
• Weight: 1.1 oz.
• 3 QD swivel sockets.
• Made in the USA.

EMR-A is a long in development ambidextrous magazine release for .223 and .308 AR receivers. The placement of its lever is well thought out to closely mirror the magazine release button on the right side.

• Made from CNC machined 4140 steel.
• Black Nitride coated.
• Dimpled texture allows all angle resistance.
• Lever 7075 aluminum and Type 3 hard coat anodized.
• The roll pin has a shear strength of 800lbs.
• Made in the USA.

The BT46-LW17 PSR (Precision Sniper Rifle) Atlas Bipod mounts directly to any 1913 style Picatinny rail via the included ADM-170-S lever. It is comprised of 6061-T6 aluminum, except the strengthened inner legs which are made from 7075-T6 aluminum that are Mil-Spec Type III hard coat anodized and have heat treated, stainless steel components. Available in black only.

The BT46-LW17 was selected for the SOCOM PSR (Precision Sniper Rifle) Weapons System.

• Height Range: 4.75 – 9.0″ approximately
• Preloaded Pan: 15 degrees +/-
• Preloaded Cant: 15 degrees +/-
• Fore and Aft pivot limiting Bosses
• 5 leg positions: 0, 45, 90, 135 and 180 degrees
• Non-Rotating Legs: outer leg does not rotate around inner leg
• Larger, stronger inner legs
• Weight: 13.61 ounces

The Airborne Charging Handle (ACH) was developed at the request of an elite organization famous for its expertise in aerial insertion. The organization requested a lower profile lever design to reduce the chances of snagging.

• The ACH’s lower profile design is especially ideal for rifles where the primary sighting system is a red dot or similar low profile optic system.
• The ambidextrous ACH is 3D machined from a solid block of aircraft-grade 7075-T6 aluminum.
• Shortened levers are dual contoured with gently concaved radius cuts in the vertical and horizontal planes.
• The handling surfaces of the levers are checkered for confident operation while wearing gloves.
• A taller fence at the rear of the ACH aids in redirecting gas blow back when shooting with short barreled and suppressed weapon systems.
• The ACH and its components are Type 3 Hardcoat anodized and are available in Black and DDC (Desert Dirt Color).

The Super Precision MRO Series was developed specifically to work with the Trijicon MRO and like mounted red dot optics.

• Mounts are precision machined from a single piece of 7075-T6 high strength aluminum
• Available in co-witness, lower third co-witness and 1.93″ options

The DOT Mount™ by Reptilia is a lightweight, slim-line mounting solution for a variety of red dot optics.

• Machined from billet 7075-T6 aluminum
• Milspec Type III hard anodized finish
• Lower 1/3 co-witness
• Spring-loaded nitrided steel clamp
• Anti-snag design
• 100% made in the USA
• 1.5 oz

The Super Modular Rail (SMR) MK4 M-LOK™ is Geissele’s ultra-lightweight M-LOK option. These rails are purpose-built and feature integrated M1913 Picatinny rail sections at the fore of the rail in the 3, 6, and 9 o’clock positions. Maximum venting for heat dissipation also dramatically reduces the rail’s overall weight, while maintaining its same strong and rigid platform. Utilizing Magpul’s M-LOK technology at the 3, 6, and 9 o’clock positions, as well as the upper 45 quadrants. The SMR MK4 is both versatile and modular, allowing the user to tailor their platform to his or her unique needs.

• HEIGHT: 2.4″
• COLOR: Black or DDC
• MATERIAL: 6061-T6
• FINISH: Type 3 Hardcoat Anodize
• LENGTH: 13.5″
• INNER DIAMETER: 1.35″
• OUTER DIAMETER (DAQ*): 2.11″
• SMR MK4 13″ WEIGHT: 11.8oz (13.5oz w/ barrel nut)

The Reliability Enhanced Bolt Carrier Group is a 5.56mm full-mass, full-auto rated M16/M4 bolt carrier group manufactured in Geissele’s state-of-the-art manufacturing facility in North Wales, PA.

• Features a forged bolt manipulates the grain structure of the metal and yields a bolt capable of 5 times the life of a mil-spec bolt.
• M16 cut carrier
• Carrier Material: 8620 Steel
• Bolt Material: Carpenter 158
• Finish: Nanoweapon (Chrome-Nitride)
• Caliber: 5.56mm
• Maximum corrosion and wear resistance.
• Each bolt is then rigorously inspected.
• The carrier features a properly torqued and staked, chrome-lined, gas key.