KeyMod

-4%
Compare

USED – BCM Gunfighter KeyMod Vertical Fore Grip BCM-VG-KM-MOD-3

Out of stock

$20.22

Direct Attach to KeyMod™ Version

  • Low-profile length for increased mobility and decreased “snag” factor.
  • The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
  • Can be mounted in reverse angle to increase control when grabbing handguard and grip.
  • Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations.
  • Anchor and bolt system offers a simple robust design, while maintaining a lightweight 1.9 ounces.
  • Made in the U.S.A., manufactured from high quality, impact resistant polymers.
Select options
-33%
Compare

USED – Arisaka Defense Ring Light Mount for M-LOK & KeyMod

Out of stock

$30.36

The Arisaka Ring Light Mount provides a flexible yet secure way to attach handheld lights to your handguard. Available for KeyMod, M-Lok, and CMR interfaces, it uses a vertically anchored ring system that comes in two sizes to accommodate a wide variety of lights.

The clamping ring will accept light bodies with a diameter from 1.00″ to 1.03.” A light can be installed and removed without having to take the mount off your handguard.

The offset placement of the light while using the mount is designed to allow clearance with most front sights. For example, a 1.03″ light like the Surefire G2 will work with the Magpul Gen 2 MBUS on a Noveske NSR, which is one of the thinnest handguards at 1.48″ wide.

  • Weight: 1.0 oz.
  • The mount is CNC machined from 6061-T6 aluminum
  • MIL-A-8625 Type III hard coat anodized.
  • Requires a 3/32″ Allen wrench for installation (not included).
  • Made in the USA.
Select options
-31%
Compare

USED – Arisaka Defense Side Scout Mount KeyMod (SSM-K)

In stock

$25.44 – $31.49

The Arisaka Side Scout Mount (SSM-K) for KeyMod rails is designed for use with Surefire Scout Lights, the Arisaka 300 and 600 Series, and the Streamlight Protac Rail Mount lights. It replaces the stock Picatinny rail adapter with a low profile mount for M-Lok handguards, and tucks the light underneath either side of the ATPIAL laser/illuminator series, including the ATPIAL-C, AN/PEQ15, and LA-5/PEQ. It will also allow the light to clear the QD lever on the Steiner DBAL I2, A3, and D2.

  • Length: 1.265″
  • Thickness: 0.2″
  • Weight: 0.6 oz
  • CNC machined from 6061-T6 aluminum
  • MIL-A-8625 Type III hard coat anodized.
  • Includes necessary screws to attach light body to mount.
  • Requires a T15 and IP20/T20 Torx driver for installation (not included).
Select options
-17%
Compare

USED – Arisaka Defense Inline Scout Mount – KeyMod

Out of stock

$30.82

The Patented Arisaka Inline Scout Mount is designed specifically for the Surefire Scout Light M600 and M300 series weapon lights, the Arisaka 300 and 600 Series Lights, and the Streamlight Protac Rail Mount 1 and 2. It replaces the stock Picatinny rail adapter with a low profile mount for KeyMod handguards.

  • Length: 3.0”.
  • Height: 0.20″ (at Surefire Scout Light mounting point).
  • Weight: 0.5 oz.
  • Material: CNC machined from 7075-T6 aluminum.
  • Finish: MIL-A-8625 Type III hard coat anodized.
  • BCM KeyMod screws are covered under US Patent 9377274.
  • Includes necessary screws to attach light body to mount.
  • Made in the USA.
Select options
-23%
Compare

USED – Cloud Defensive KeyMod Light Control System, Mount for SureFire ST07 Tape Switch – LCSmk1-d

Out of stock

$54.20
  • Unique Patented design utilizes a slot that ensures a snug, perfect friction-fit for the tape switch. Once installed its not coming out unless you want it to.
  • Precision CNC machined from Certified 6061 aluminum for superior strength.
  • Proprietary dual cable control channels machined into the one-piece mount.
  • Proprietary “Early Cable Exit” machined into each cable control channel. This allows you to only use part of the cable control channel should you need more slack in the cable to span across the handguard, et.
  • 100% MADE IN THE USA
Select options
-9%
Compare

Unity Tactical TAPS NGAL – Dual Pressure Switch

Out of stock

$272.00

TAPS (Tactical Augmented Pressure Switch) from TNVC and Unity Tactical is a complete one-point command and control system for weapon-mounted electronics.

  • NGAL model is only compatible with Surefire-type tail caps and the L-3Harris NGAL Laser.
  • Features a proprietary visible laser override.
  • Provides low-profile, dual-device control for lights and lasers.
  • TAPS allows placement of weapon accessories in optimal location while providing a single point of actuation of the operator’s choosing.
  • Rather than needing to place both light and laser where they can be activated directly, or needing to find places for multiple remote pressure pads while securing loose cables, TAPS literally places control at the operator’s fingertips in a single, user-friendly package.
Select options
-8%
Compare

Bravo Company BCM 1913 Modular Light Mount – KeyMod

Out of stock

$41.32

For 1913 Mounted Lights – KeyMod™ Version

  • Fully ambidextrous: made to mount flush or cantilever off either the left or right side of the rail system.
  • Optional high and low mounting position for the 1913 rail section.
  • Fits most common 1913-rail pistol/weapon light systems
  • Multiple mounting holes for ideal placement.
  • Designed to mount on the 3 or 9 o’clock rail positions.
  • Durable Aluminum construction. Intently designed to be low-profile and snag-free
  • Patent Pending mounting system
  • Minimal added weight, 0.9 oz.
View product
-14%
Compare

Arisaka Defense Vertical Grip for KeyMod Rails

In stock

$30.00

The Arisaka Defense Vertical Grip is a robust, minimal grip for KeyMod handguards. It features a radiused profile at the top which tapers to meet the mounting surface on the handguard, giving a low-profile feel and ergonomic comfort. Twin mounting screws ensure secure attachment. The grip is hollow, with no end-cap.

  • Height: 2.50″
  • Width: 1.30″
  • Weight: 1.8 oz
  • CNC machined from 6061-T6 aluminum
  • MIL-A-8625 Type III hard coat anodized.
  • Requires a 9/64″ Allen wrench for installation (not included).
  • Made in the USA.
Add to cart
Compare

Cloud Defensive KeyMod Light Control System, Mount for SureFire ST07 Tape Switch – LCSmk1-d

Out of stock

$69.99 – $74.99
  • Unique Patented design utilizes a slot that ensures a snug, perfect friction-fit for the tape switch. Once installed its not coming out unless you want it to.
  • Precision CNC machined from Certified 6061 aluminum for superior strength.
  • Proprietary dual cable control channels machined into the one-piece mount.
  • Proprietary “Early Cable Exit” machined into each cable control channel. This allows you to only use part of the cable control channel should you need more slack in the cable to span across the handguard, et.
  • 100% MADE IN THE USA
Select options
Compare

Arisaka Defense Side Scout Mount KeyMod (SSM-K)

In stock

$37.00 – $42.00

The Arisaka Side Scout Mount (SSM-K) for KeyMod rails is designed for use with Surefire Scout Lights, the Arisaka 300 and 600 Series, and the Streamlight Protac Rail Mount lights. It replaces the stock Picatinny rail adapter with a low profile mount for M-Lok handguards, and tucks the light underneath either side of the ATPIAL laser/illuminator series, including the ATPIAL-C, AN/PEQ15, and LA-5/PEQ. It will also allow the light to clear the QD lever on the Steiner DBAL I2, A3, and D2.

  • Length: 1.265″
  • Thickness: 0.2″
  • Weight: 0.6 oz
  • CNC machined from 6061-T6 aluminum
  • MIL-A-8625 Type III hard coat anodized.
  • Includes necessary screws to attach light body to mount.
  • Requires a T15 and IP20/T20 Torx driver for installation (not included).
Select options
-1%
Compare

BCM Gunfighter KeyMod Vertical Fore Grip BCM-VG-KM-MOD-3

Out of stock

$20.81 – $21.00

Direct Attach to KeyMod™ Version

  • Low-profile length for increased mobility and decreased “snag” factor.
  • The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
  • Can be mounted in reverse angle to increase control when grabbing handguard and grip.
  • Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations.
  • Anchor and bolt system offers a simple robust design, while maintaining a lightweight 1.9 ounces.
  • Made in the U.S.A., manufactured from high quality, impact resistant polymers.
Select options
-8%
Compare

Unity Tactical M-LOK Vertical Fore-Grip VFG

In stock

$24.00 – $24.80

The Unity Tactical VFG is a perfect size Vertical Fore Grip for M-LOK rails.

  • 360-degree sloping sides provide increased grip-ability from all angles.
  • The unique shape creates a seamless grip flow from rail to VFG.
  • Weight: less than 1.5oz
  • Dimensions: 1.6 × 4.3 × 6.8 in
  • Includes all mounting hardware required for M-LOK handguards.
Select options
Compare

Arisaka Defense Inline Scout Mount – KeyMod

Out of stock

$37.00 – $42.00

The Patented Arisaka Inline Scout Mount is designed specifically for the Surefire Scout Light M600 and M300 series weapon lights, the Arisaka 300 and 600 Series Lights, and the Streamlight Protac Rail Mount 1 and 2. It replaces the stock Picatinny rail adapter with a low profile mount for KeyMod handguards.

  • Length: 3.0”.
  • Height: 0.20″ (at Surefire Scout Light mounting point).
  • Weight: 0.5 oz.
  • Material: CNC machined from 7075-T6 aluminum.
  • Finish: MIL-A-8625 Type III hard coat anodized.
  • BCM KeyMod screws are covered under US Patent 9377274.
  • Includes necessary screws to attach light body to mount.
  • Made in the USA.
Select options
Compare

Arisaka Defense Ring Light Mount for M-LOK or KeyMod

In stock

$47.68 – $53.01
Select options
Compare

Arisaka Defense QD Mount for KeyMod – Quick Detach Sling Swivel Mount

Out of stock

$23.00

The Arisaka QD Mount is a low profile design for KeyMod handguards. It features an anti-rotation interface, allowing for 8 different positions, and accepts all standard QD sling swivels, as well as the Geissele/ALG Defense forged QD sling swivel. The use of BCM’s patented reverse threaded KeyMod screws allows the mount to be extremely thin.

  • Height: 0.167”
  • Weight: 0.19 oz
  • CNC machined from 6061-T6 aluminum and MIL-A-8625 Type III hard coat anodized.
  • Requires a T15 Torx wrench for installation (not included).
  • BCM KeyMod screws are covered under US Patent 9377274.
  • Made in the USA.
View product
Compare

Impact Weapons Components KeyMod QD Rotation Limited Sling Mount

Out of stock

$17.00
  • Accepts any Heavy Duty or Standard push button Quick Detach Sling Swivel that connects to any sling and sling system
  • Rotation is limited to 8 positions which allows proper positioning of the sling between the firing and carrying position. Prevents sling wrap-up and twist
  • Sculpted design to compliment the shape of KeyMod rails, the mount provides a low profile, snag-proof and ergonomic design
  • Directly attaches to any KeyMod compliant slot
  • Weight: Ultra-lightweight MOUNT-N-SLOT design weighs only .172 ounces
  • Dimensions: .188″ High .550″ Width 1.308″ Length
  • 100% LIFETIME WARRANTY. PERIOD
  • IWC MOUNT-N-SLOT products are MADE BY AMERICANS IN USA
View product
Compare

Arisaka Defense Offset Scout Mount – KeyMod

Out of stock

$45.00 – $50.00

The Patent Pending Arisaka Offset Scout Mount is designed specifically for the Surefire Scout Light M600 and M300 series weapon lights, the Arisaka 300 and 600 Series Lights, and the Streamlight Protac Rail Mount 1, 2 and HL-X. It replaces the stock Picatinny rail adapter with a low profile mount for KeyMod handguards. The Offset Scout Mount uses BCM’s patented inverted KeyMod screws, which allows it to be less than 0.20″ thick.

  • Length: 1.265”
  • Weight: 0.4 oz
  • CNC machined from 6061-T6 aluminum
  • MIL-A-8625 Type III hard coat anodized
  • Includes necessary screws to attach light body to mount
  • Requires a T15 Torx and 5/64″ Allen wrench for installation (not included)
  • BCM KeyMod screws are covered under US Patent 9377274
  • M620 series lights can also be used with the Offset Scout Mount with the addition of the Arisaka Offset M620 Adapter.
  • Made in the USA.
Select options
Compare

Arisaka Defense Offset Picatinny Mount – KeyMod

Out of stock

$60.00

The Patent Pending Arisaka Offset Picatinny Mount is a combination of our Offset Scount Mount and Picatinny adapter, and is meant for use with Picatinny based lights like the Surefire X300 or Inforce WML, plus other rail mounted accessories. The Offset Picatinny Mount uses BCM’s patented inverted KeyMod screws, which allows the base to be less than 0.165″ thick.

  • Length: 1.77″
  • Height: 0.20″ (at Surefire Scout Light mounting point)
  • Weight: 1.0 oz
  • The mount is CNC machined from 6061-T6 aluminum and MIL-A-8625 Type III hard coat anodized
  • Requires a T15 Torx and 5/64″ Allen wrench for installation (not included)
  • BCM KeyMod screws are covered under US Patent 9377274
  • Made in the USA
View product