Used - Excellent Condition

Upgrade your FAST™ Micro Mount by replacing the standard rail-grabber clamp mount with this drop-in American Defense Manufacturing® patented QD Auto-Lock™ Lever. This mounting option will provide quick detach capability. For current generation Unity FAST Mounts only.

The RCM (Rifle Combat Magwell) features a 250% larger funnel surface allowing for consistent and fast reloads under any condition.

• Material: Nylon Polymer
• Weight: 0.6oz (17g)
• Included Hardware: RCM 2-56 Bolt (2)
• Includes 5/64″ Hex L-Key for Install
• Instructions: Available Here
• Color: Black, FDE and ODG
• Made in the USA

The AMC (Armored Magnifier Cover) for the EOTech G33 provides a sturdy solution for protecting the elevation and windage turrets.

• Material: Nylon Polymer
• Weight: 0.67oz (19g)
• Included Hardware: AMC 2-56 Bolt (4), AMC 2-56 Nut (4)
• Includes 5/64″ Hex L-Key for Install
• Color: Black and FDE
• Made in the USA
• Length: 2.59″ (66mm)
• Width: 1.94″ (49mm)
• Height: 2.08″ (53mm)

BFG’s Suppressor Cover Heavy is designed to fit suppressors that are 1.5 inches in diameter and can be made to fit any length. The Burn Proof Gear Covers are designed to be 0.5 inches longer than the suppressor itself. This allows the cover to cinch around the front and rear of the suppressor to ensure a “No-Slip Fit.”

• The Heavy cover is rated up to 150 rounds full auto within a 15 minute firing schedule
• Compatible with all rifle caliber (.223, 300 BLK, .308, 5.56 NATO, 7.62 NATO) suppressors.
• Sizes range from 6 inches to 9 inches long and weigh less than 3 ounces at the shortest configuration and 5.5 ounces at 12.5 inches long.
• Two piece design; an inner fiberglass sleeve rated to 2000 F and the outer Kevlar / Nomex cover rated to 1000 F.

The Shockwave Technologies Raptor Grip is Made in America. With its enhanced texture, you gain a great hold on your weapon. Its glass-filled polymer construction is virtually indestructible.

This is a new style of bird’s head grip (aka birdshead grip aka witness protection grip aka chicken head grip aka border patrol grip aka entry-style grip aka bad ass grip) developed and manufactured by Shockwave Technologies, LLC in the U.S.A.

• Unique angle of the Raptor Grip minimizes felt recoil, allowing maximum control shot after shot. It also just looks badass. Yes, mounting hardware and bolt hole plug are included. (Requires a 1/4″ hex wrench for installation, not included.)
• Fits a variety of 12g and 20g shotguns
• This is the 2nd generation model, includes bolt and bolt plug
• Available in Black, Flat Dark Earth, Stealth Grey and OD Green.

The Shockwave Technologies Raptor Forend Nut tool is an extra long stainless steel tool for the Mossberg 500 forend and Remington 870 forend. Remove and replace your forend in under two minutes.

• Precision-machined in Dunedin, Florida.
• Manufactured from 304 stainless steel.
• Won’t rust like a carbon steel tool.
• Won’t deform like a nylon or aluminum tool.
• Remove the most stubborn forend nuts.
• Insert a bar or screwdriver through one of the provided holes for extra leverage.
• Over 4″ long for reaching the deepest recessed nuts on the longest magazine tubes.
• No need to remove the magazine tube from your firearm.
• One side fits Mossberg 500 guns and the other Remington 870 and Hawk 982 guns.
• Fits 12-gauge guns with short, medium, long, or even extra long magazine tubes.
• Compatible with the Streamlight tactical forend.

The M-LOK MVG is a light weight, inexpensive vertical foregrip that attaches directly to M-LOK compatible hand guards and forends with no additional Picatinny rails required. Made from the same high quality polymer as other Magpul products, the M-LOK MVG uses the new Magpul TSP texture for positive control in all environments.

• With rounded contours and a shorter length, it has been optimized for use with the “thumb break method” of shooting and can also be used as a traditional vertical foregrip.
• All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.
• Weight, w/hardware: 1.4 oz.
• Length: 3.0″
• Made in U.S.A.

Designed for use with 1913 Picatinny railed hand guards, the RVG is a basic, light weight, cost-effective vertical fore grip. Shape is ergonomically designed for use as a traditional vertical grip. It has also been optimized for use with the “thumb break method” of shooting as taught by Magpul DynamicsSM. Includes all mounting hardware plus a universal mounting rail for custom fitting to many factory plastic hand guards.

• Made in U.S.A.

Shorter (K) length GripStop for M-LOK Rails. Increased ergonomics and control on all M-LOK compatible firearms.

• Fits the Magpul M-LOK mounting interface
• Weight : 2 oz with hardware
• Rugged 6061-T6 Aluminum construction
• MilSpec Type III anodized finish

Note: Shades of FDE (Earth Brown) may vary due to the chemical process during the Type 3 Hardcoat.

Standard length GripStop for M-LOK Rails. Increased ergonomics and control on all M-LOK compatible firearms.

• Fits the Magpul M-LOK mounting interface
• Weight : 2 oz with hardware
• Rugged 6061-T6 Aluminum construction
• MilSpec Type III anodized finish

Note: Shades of FDE (Earth Brown) may vary due to the chemical process during the Type 3 Hardcoat.

The Patent Pending Arisaka Hand Stop is a continuation of the low profile, minimal control accessories. The primary goal of this accessory is to aid the user in pulling their rifle into their shoulder, enhancing control and recoil mitigation.

• Height: 1.3″
• Width: 1.19″ at Picatinny clamp, 0.625″ at main interface where your hand or fingers contact.
• Length: 1.1″
• Weight: 0.84 oz
• Material: 6061-T6 aluminum
• Finish: Black MIL-A-8625 Type III hard coat anodized
• Compatibility: 1913 Picatinny Rails
• Made in the USA

The Arisaka Tailcap Adapter allows Streamlight Protac Rail Mount 1 and 2 lights to use Surefire Scout tailcaps and remote switches. In particular, the Protac Rail Mount lights can now be used with the Surefire SR-D-IT and TNVC/Unity TAPS dual switches, which are commonly paired with laser/illuminators like the ATPIAL and DBAL series.

One of the main flaws of the Protac Rail Mount lights is also addressed: Streamlight did not design a front battery spring into the light, so under recoil, the battery can come off the front contact and cause the light to flicker or blink. To help prevent this behavior the adapter includes a removable buffer o-ring on the front face which ensures the battery cannot move rearward while firing.

Compatible lights:

• Streamlight Protac Rail Mount 1
• Streamlight Protac Rail Mount 2

Simplistic, Reliable, Ultra-Lightweight design contains only the materials needed to meet the objective; attaching a light to the Benelli M4 Weapon System.

• Weighs 1.27 Ounces.
• Only one tool needed for installation.
• CNC Machined from Billet 6061-T6 Aluminum and Black Type III Mil-Spec Anodized finish.
• Made in USA

The Arisaka Ring Light Mount provides a flexible yet secure way to attach handheld lights to your handguard. Available for KeyMod, M-Lok, and CMR interfaces, it uses a vertically anchored ring system that comes in two sizes to accommodate a wide variety of lights.

The clamping ring will accept light bodies with a diameter from 1.00″ to 1.03.” A light can be installed and removed without having to take the mount off your handguard.

The offset placement of the light while using the mount is designed to allow clearance with most front sights. For example, a 1.03″ light like the Surefire G2 will work with the Magpul Gen 2 MBUS on a Noveske NSR, which is one of the thinnest handguards at 1.48″ wide.

• Weight: 1.0 oz.
• The mount is CNC machined from 6061-T6 aluminum
• MIL-A-8625 Type III hard coat anodized.
• Requires a 3/32″ Allen wrench for installation (not included).
• Made in the USA.