Glock 17
USED – Trijicon Fiber Optic Sights for Glock
Out of stock
$77.32Featuring similar fiber optic materials used in several Trijicon® fiber optic scopes and sights, including the battle-proven ACOG®, the Trijicon® Fiber Sights are purposely engineered to bring the absolute brightest aiming point while retaining strength and maintaining a refined sight picture.
- .060″ red fiber pre-installed on the front sight, and an extra red and green fiber replacement in the package
- Thin front post (.110” width) allows for a refined sight picture in a variety of shooting environments and distances and gives a better field of view for longer range engagements
- Built using leading edge fiber technology and Trijicon’s legendary rugged metal construction
- Steeply hooked front surface of rear sight assists in emergency one-handed slide manipulations
- Rounded edges of rear sight reduce snag points for improved comfort while carrying
USED – ZEV Technologies Small Mag Release for 4th and 5th Gen GLOCK
Out of stock
$38.35The Zev Technologies™ Gen 4 Magazine Release for the Glock® was designed with an aggressive rearward angle and a non-slip textured face that matches the factory finish of your Gen 4 grip. This Mag release is a drop-in replacement part. Compatible with Gen5 models. Not compatible with Gen3 models.
USED – ZEV Technologies PRO Plus Magwell for Glock Gen 5
Out of stock
$85.80The ZEV Technologies PRO Plus Magwell was designed for the professional shooter that is looking to enhance the look and performance of their Gen 5 Glock. The one piece design facilitates easy installation and utilizes a single attachment screw to securely mount to the Glock frame while retaining a low profile.
- One piece 6061 aluminum design
- Type III anodized finish
- Kit includes Magwell body, mounting screw and wrench
USED – Safariland 6390RDS ALS Mid-Ride Level 1 Retention Duty Holster
Out of stock
$109.18The 6390RDS holster is specifically designed for firearms with red dot sights mounted to them.
- Low-ride belt loop that is 1.5″ lower than standard.
- Rides close to the body.
- Added suede lining to protect the gun’s sights and finish.
- ALS® (Automatic Locking Systems) secures weapon once holstered; simple straight-up draw once the release is deactivated.
- For use with red dot optic-equipped weapons.
- SafariLaminate™ thermal-molded construction protects handgun and sights.
- Suede lined to protect the handgun’s finish.
- Made in the USA.
USED – KAGWERKS Extended and Raised Slide Release for Glock GEN 5
Out of stock
$38.72 – $44.94Reduce Slide Stop Override! As shooting proficiency grows, so does the way a shooter grips the gun. Using the standard slide release presents certain limitations that can hinder performance and ability for more advanced shooters. KAGWERKS extended and raised slide release offers a unique advantage to trained shooters with a proper higher-position grip.
Compatible with the following Glock Models:
- GEN 5 9×19: G17, G19, G19x, G26, G34, G45
- Tested on and built for Gen 5.
USED – Forward Controls Design OPF-G Glock MOS Mounting Plate – ACRO
Out of stock
$57.33The OPF-G-ACRO is the perfect choice for installing the ACRO on your Glock MOS pistol slide. It is identical to the Tangodown AAM-01. FCD is proud to rebrand the Tangodown optic plate because of its outstanding design.
- Machined in 4140 steel.
- Melonite Coating.
- Proudly designed and made in the USA.
USED – Forward Controls Design Glock MOS Mounting Plate for RMR/SRO
Out of stock
$54.12OPF-G, RMR (Optics Platform, Glock, for RMR) is a Glock MOS Adapter Set 01 and Set 02 compatible plate for mounting Trijicon RMR or SRO on Glock Gen 4 and Gen 5 slides, G17, G19, G34, G35, G41 (width 25mm/1 inch.) and G40 that uses Set 02.
- Sight is to be fully supported in the front and rear by recoil lugs/fences, with minimum movement.
- Eliminate the need to use an additional sealer plate.
- Correct length sight to plate, and plate to slide screws. Screws are to be Torx.
- The adapter plate is to be machined in steel.
- Proudly designed and made in the USA.
Raven Concealment Systems OWB Perun Holster for Glock 17
In stock
$49.99The Perun is designed to be the best modular OWB “pancake” style holster on the market.
- Body-hugging design that rides high for maximum concealment.
- Each holster includes three pairs of 1.5” belt loops.
- Allows for 0-degree or 10-degree cant.
- Crisp, defined, and consistent retention.
- Compatible with generation 3-5 Glock pistols.
- Not compatible with Gen 5 Glock 40 cal-G22, G23, G27, G35 & G24.
- Ambidextrous configuration for left-handed or right-handed use.
Killer Innovations Glock Magazine Extension
Out of stock
$52.49Killer Innovations Velocity Mag Extensions “Enhanced Grip Feature” cuts will change the way you reload. E.G.F. cuts provide an aggressive serrated lip that give the shooter ultimate grip and angularity control while feeding the mag into the pistol. E.G.F. cuts are located at the bottom-front and sides of the mag extension, so however you prefer to grab your mag for a reload, a perfect grip is always there.
- Material: 6061 T6 Aluminum
- Finish: Anodize
- Dims: 1.5″W x 1.79″L x 1.66″H
- Includes extended spring
- 9mm +5 rounds
- .40 cal +4 rounds
Zev Technologies Glock Magazine Extension – Aluminum
In stock
$47.00 – $48.60This high quality aluminium base pad from Zev Technologies offers an extended round capacity for 17 round Glock magazines.
- Only compatible with 17 round magazines (see list below)
- 3 piece design easy to assemble and disassemble
- Finish: Black Type III Hard Anodize
- Material: Aluminum
- 9mm Magazines: +5 Round Extension
- .40 Cal Magazines: +4 Round Extension
Zev Technologies Glock Magazine Extension – Polymer
Out of stock
$30.38This high quality polymer base pad from Zev Technologies offers an extended round capacity for 17 round Glock magazines.
- Only compatible with 17 round magazines (see list below)
- 3 piece design easy to assemble and disassemble
- Material: Polymer
- 9mm Magazines: +5 Round Extension
- .40 Cal Magazines: +4 Round Extension
Timney Triggers Alpha Competition Trigger for Glock Gen 3/4
In stock
$184.41With a factory pull weight of 3 pounds, the Timney Alpha Competition trigger answers the long call for a trigger that has the same feel and performance that matches the reliability of the Glock system by providing an improved trigger design that does not sacrifice any part of the Glock reliability.
- Three-pound pull weight.
- Crisp trigger break.
- Teflon nickel (NP3) – trigger bar and sear (this process virtually eliminates friction, allowing for an extremely smooth feel).
- Straight aluminum trigger with safety blade (anodized).
- Uses all stock Glock parts and springs.
- Compatible with stock Glock triggers.
Forward Controls Design OPF-G Glock MOS Mounting Plate – DPP
In stock
$68.87OPF-G, DPP (Optics Platform, Forward Controls, Delta Point Pro) uses the same proven design of the OPF-G, RMR to keep the Delta Point Pro immobile, the simplest and most effective way to prevent sight-to-plate mounting screws from loosening and shearing.
- Billet machined in 4140.
- Heat treated and black nitride coated.
- Torque Value plate to slide: 13in/lb.
- Torque Value sight to plate: 25in/lb.
- Proudly designed and made in the USA.
Forward Controls Design OPF-G Glock MOS Mounting Plate – ACRO
Out of stock
$68.87The OPF-G-ACRO is the perfect choice for installing the ACRO on your Glock MOS pistol slide. It is identical to the Tangodown AAM-01. FCD is proud to rebrand the Tangodown optic plate because of its outstanding design.
- Machined in 4140 steel.
- Melonite Coating.
- Proudly designed and made in the USA.
Forward Controls Design Glock MOS Mounting Plate for RMR/SRO
Out of stock
$68.87OPF-G, RMR (Optics Platform, Glock, for RMR) is a Glock MOS Adapter Set 01 and Set 02 compatible plate for mounting Trijicon RMR or SRO on Glock Gen 4 and Gen 5 slides, G17, G19, G34, G35, G41 (width 25mm/1 inch.) and G40 that uses Set 02.
- Sight is to be fully supported in the front and rear by recoil lugs/fences, with minimum movement.
- Eliminate the need to use an additional sealer plate.
- Correct length sight to plate, and plate to slide screws. Screws are to be Torx.
- The adapter plate is to be machined in steel.
- Proudly designed and made in the USA.