Glock 19
USED – Trijicon Fiber Optic Sights for Glock
Out of stock
$77.32Featuring similar fiber optic materials used in several Trijicon® fiber optic scopes and sights, including the battle-proven ACOG®, the Trijicon® Fiber Sights are purposely engineered to bring the absolute brightest aiming point while retaining strength and maintaining a refined sight picture.
- .060″ red fiber pre-installed on the front sight, and an extra red and green fiber replacement in the package
- Thin front post (.110” width) allows for a refined sight picture in a variety of shooting environments and distances and gives a better field of view for longer range engagements
- Built using leading edge fiber technology and Trijicon’s legendary rugged metal construction
- Steeply hooked front surface of rear sight assists in emergency one-handed slide manipulations
- Rounded edges of rear sight reduce snag points for improved comfort while carrying
USED – ZEV Technologies Small Mag Release for 4th and 5th Gen GLOCK
Out of stock
$38.35The Zev Technologies™ Gen 4 Magazine Release for the Glock® was designed with an aggressive rearward angle and a non-slip textured face that matches the factory finish of your Gen 4 grip. This Mag release is a drop-in replacement part. Compatible with Gen5 models. Not compatible with Gen3 models.
USED – Zev Magwell PRO Compact for Glock 19 Gen 5
Out of stock
$74.98The ZEV Technologies PRO Magwell was designed for the professional shooter that is looking to enhance the look and performance of their Gen5 Glock.
- NOTE: Only fits early model Gen 5 G19 frames that have the half moon magwell cut out, and will not fit newer model Gen 5 G19 frames that do not have it.
- One piece 6061 aluminum design.
- Type III anodized finish.
- includes magwell body, mounting screw, and wrench.
- designed and tested for compatibility with standard capacity factory magazines.
USED – Reptilia Black Hole Magwell for Glock 19 and Glock 23 GEN 3/4
In stock
$15.03 – $15.48Molded from reinforced polymer, the Black Hole’s enlarged magazine well opening helps facilitate more efficient reloads without adding unnecessary bulk to your carry or duty sidearm
- Compatible with 9mm & .40-caliber GLOCK pistols
- Utilizes a unique rear spacer to ensure seamless fit and compatibility with both Gen 3 & Gen 4 frames
- Impact-Modified Reinforced Nylon
- Custom Alloy steel screw
- 0.28 oz
- Made in USA
- Includes mounting screw and hex L-key
- NOT compatible with OEM (factory) Glock 10 round magazines but is compatible with Magpul 10 round magazines.
USED – Magpul GL Enhanced Magazine Well for Glock 19, Gen 4
Out of stock
$23.20The Magpul GL Enhanced Magazine Well for GLOCK 19 GEN 4 is a high performance, purpose-built Glock frame magazine well. It was designed to enhance and ensure positive magazine insertion in high-stress scenarios. Its sleek and ergonomic design features also provide excellent concealment and ensure minimal printing to the user’s clothing. Ramp and edge geometry allow for the smooth removal of faulty or stuck magazines during reloading or immediate action events.
- Made in the USA
- Reinforced polymer construction
- Easy installation
- Rugged polymer formula holds up to rough handling
- Large ramp area for easier reloading
- External dimensions ensure minimal printing when carrying concealed
- Compatible with Magpul, OEM, and most aftermarket magazine floor plates and magazine extensions.
USED – ANR Design AIWB Holster for Glock 19 w/ X300
Out of stock
$53.29Carry and conceal your firearms comfortably with the ANR Design minimalistic KYDEX Holster design. Our KYDEX Appendix Inside the Waistband holsters provide you with full trigger guard protection and perfect retention. Utilizing a Concealment Claw, this holster is designed with the highest level of concealment in mind. All ANR Design holsters come suppressor sight ready up to 0.450″ tall.
- Fits Glock 19 with SureFire X300
USED – ANR Design AIWB Holster for Glock 19
Out of stock
$46.54Carry and conceal your firearms comfortably with the ANR Design minimalistic KYDEX Holster design. Our KYDEX Appendix Inside the Waistband holsters provide you with full trigger guard protection and perfect retention. Utilizing a Concealment Claw, this holster is designed with the highest level of concealment in mind. All ANR Design holsters come suppressor sight ready up to 0.450″ tall.
- Fits Glock 19
USED – Safariland 7377 7TS ALS Concealment Belt Loop Holster for Glock 19
Out of stock
$31.83ALS (Automatic Locking System) secures the weapon once holstered. Simple straight-up draw once the release is deactivated.
- Open-top design without SLS for quick retrieval of weapon.
- Constructed of SafariSeven™, a proprietary nylon blend that is completely non-abrasive to a firearm’s finish.
- Raised stand-off surfaces in the holster’s interior create air space around the weapon allowing dirt and moisture to quickly clear any contact with the firearm.
- Very high heat and low cold tolerances; structurally sound from 300°F to -50°F.
- The injection-molded belt loop is user adjustable for cant and can be worn cross draw.
USED – KAGWERKS Extended and Raised Slide Release for Glock GEN 5
Out of stock
$38.72 – $44.94Reduce Slide Stop Override! As shooting proficiency grows, so does the way a shooter grips the gun. Using the standard slide release presents certain limitations that can hinder performance and ability for more advanced shooters. KAGWERKS extended and raised slide release offers a unique advantage to trained shooters with a proper higher-position grip.
Compatible with the following Glock Models:
- GEN 5 9×19: G17, G19, G19x, G26, G34, G45
- Tested on and built for Gen 5.
USED – Forward Controls Design OPF-G Glock MOS Mounting Plate – ACRO
Out of stock
$57.33The OPF-G-ACRO is the perfect choice for installing the ACRO on your Glock MOS pistol slide. It is identical to the Tangodown AAM-01. FCD is proud to rebrand the Tangodown optic plate because of its outstanding design.
- Machined in 4140 steel.
- Melonite Coating.
- Proudly designed and made in the USA.
USED – Forward Controls Design Glock MOS Mounting Plate for RMR/SRO
Out of stock
$54.12OPF-G, RMR (Optics Platform, Glock, for RMR) is a Glock MOS Adapter Set 01 and Set 02 compatible plate for mounting Trijicon RMR or SRO on Glock Gen 4 and Gen 5 slides, G17, G19, G34, G35, G41 (width 25mm/1 inch.) and G40 that uses Set 02.
- Sight is to be fully supported in the front and rear by recoil lugs/fences, with minimum movement.
- Eliminate the need to use an additional sealer plate.
- Correct length sight to plate, and plate to slide screws. Screws are to be Torx.
- The adapter plate is to be machined in steel.
- Proudly designed and made in the USA.
Killer Innovations Glock Magazine Extension
Out of stock
$52.49Killer Innovations Velocity Mag Extensions “Enhanced Grip Feature” cuts will change the way you reload. E.G.F. cuts provide an aggressive serrated lip that give the shooter ultimate grip and angularity control while feeding the mag into the pistol. E.G.F. cuts are located at the bottom-front and sides of the mag extension, so however you prefer to grab your mag for a reload, a perfect grip is always there.
- Material: 6061 T6 Aluminum
- Finish: Anodize
- Dims: 1.5″W x 1.79″L x 1.66″H
- Includes extended spring
- 9mm +5 rounds
- .40 cal +4 rounds
Timney Triggers Alpha Competition Trigger for Glock Gen 3/4
In stock
$184.41With a factory pull weight of 3 pounds, the Timney Alpha Competition trigger answers the long call for a trigger that has the same feel and performance that matches the reliability of the Glock system by providing an improved trigger design that does not sacrifice any part of the Glock reliability.
- Three-pound pull weight.
- Crisp trigger break.
- Teflon nickel (NP3) – trigger bar and sear (this process virtually eliminates friction, allowing for an extremely smooth feel).
- Straight aluminum trigger with safety blade (anodized).
- Uses all stock Glock parts and springs.
- Compatible with stock Glock triggers.